- DL manuals
- Waterline
- Hob
- UBFZ60
- Instruction Manual / Installation Manual
Waterline UBFZ60 Instruction Manual / Installation Manual
Summary of UBFZ60
Page 1
Induction hob instruction manual / installation manual model: ubfz60
Page 2: Safety Warnings
2 safety warnings your safety is important to us. Please read this information before using your cooktop. Installation electrical shock hazard • disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • connection to a good earth wiring system is...
Page 3: Operation and Maintenance
3 as it could reduce your installation costs. • in order to avoid a hazard, this appliance must be installed according to these instructions for installation. • this appliance is to be properly installed and earthed only by a suitably qualified person. • this appliance should be connected to a circu...
Page 4: Hot Surface Hazard
4 other electrical implants (such as insulin pumps) must consult with their doctor or implant manufacturer before using this appliance to make sure that their implants will not be affected by the electromagnetic field. • failure to follow this advice may result in death. Hot surface hazard • during ...
Page 5
5 retracted.Use with extreme care and always store safely and out of reach of children. • failure to use caution could result in injury or cuts. Important safety instructions • never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite. • never us...
Page 6
6 cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • do not leave children alone or unattended in the area where the appliance is in use. • children or persons with a disability which limits their ability to use the appliance should have a responsible and co...
Page 7
7 •this appliance is intended to be used in •this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in ...
Page 8: Congratulations
8 congratulations on the purchase of your new induction hob. We recommend that you spend some time to read this instruction / installation manual in order to fully understand how to install correctly and operate it. For installation, please read the installation section. Read all the safety instruct...
Page 9: A Word On Induction Cooking
9 a word on induction cooking induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The glass becomes hot only because the pan eventual...
Page 10: Choosing The Right Cookware
10 choosing the right cookware • only use cookware with a base suitable for induction cooking. Look for the induction symbol on the packaging or on the bottom of the pan. • you can check whether your cookware is suitable by carrying out a magnet test. Move a magnet towards the base of the pan. If it...
Page 11: Pan Dimension
11 pan dimension the cooking zones are, up to a limit, automatically adapted to the diameter of the pan. However the bottom of this pan must have a minimum of diameter according to the corresponding cooking zone. To obtain the best efficiency of your hob, please place the pan in the centre of the co...
Page 12: Setting
12 4. Adjust heat setting by touching the slider control. • if you don’t choose a heat setting within 1 minute, the induction hob will automatically switch off. You will need to start again at step 1. • you can modify the heat setting at any time during cooking. If the display flashes alternately wi...
Page 13: Using The Boost Function
13 3. Turn the whole cooktop off by touching the on/off control. 4. Beware of hot surfaces h will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use ...
Page 14: Using The Keep Warm Function
14 cancel the boost function 1. Touching the heating zone selection control that you wish to cancel the boost function 2. A: touching the boost control “ ”, then the cooking zone will revert to its original setting. B: touching the slider control, then the cooking zone will revert to the level you s...
Page 15
15 2. Touching the keep warm control ,the zone indicator show “ “ , this means choosing the heating level for warming up and keeping 42°c with 2l of water . Touching the keep warm control again ,the zone indicator show “ ” , this means choosing the heating level for warming up and keeping 74°c with ...
Page 16: Flexible Area
16 flexible area • this area can be used as a single zone or as two different zones, accordingly to the cooking needs anytime. • flexible area is made of two independent inductors that can be controlled separately. When working as a single zone, a cookware is moved from one zone to the other one wit...
Page 17: Locking The Controls
17 4. To add a further pot, press again the dedicated keys, in order to detect the cookware. As two independent zones to use the flexible area as two different zones with different power settings, press the dedicated keys. Locking the controls • you can lock the controls to prevent unintended use (f...
Page 18: Detection of Small Articles
18 detection of small articles when an unsuitable size or non-magnetic pan (e.G. Aluminium), or some other small item (e.G. Knife, fork, key) has been left on the hob, the hob automatically go on to standby in 1 minute. The fan will keep cooking down the induction hob for a further 1 minute. Auto sh...
Page 19
19 4.Touch timer control again, the “1” will flash. 5. Set the time by touching the slider control (e.G.9), now the timer you set is 96 minutes. 6. Buzzer will beep for 30 seconds and the timer indicator shows “00 “ when the setting time finished. Setting the timer to turn cooking zones off if the t...
Page 20
20 2. Touch timer control , the “10” will show in the timer display. And the “0” flashes. 3. Set the time by touching the slider control. (e.G. 6) 4. Touch timer control again, the “1” will flash. 5. Set the time by touching the slider control (e.G.9), now the timer you set is 96 minutes. 6. When th...
Page 21: Using The Pause Control
21 if the timer is set on more than one zone: 1. When you set the time for several cooking zones simultaneously, decimal dots of the relevant cooking zones are on. The minute display shows the min. Timer. The dot of the corresponding zone flashes. (set to 15 minutes) (set to 45 minutes) 2. Once the ...
Page 22: Heat Settings
22 • start cooking on a high setting and reduce the setting when the food has heated through. Simmering, cooking rice • simmering occurs below boiling point, at around 85˚c, when bubbles are just rising occasionally to the surface of the cooking liquid. It is the key to delicious soups and tender st...
Page 23: Care And Cleaning
23 factors, including your cookware and the amount you are cooking. Experiment with the induction hob to find the settings that best suit you. Heat setting suitability 1 - 2 • delicate warming for small amounts of food • melting chocolate, butter, and foods that burn quickly • gentle simmering • slo...
Page 24: Hints And Tips
24 but beware of hot cooking zone surfaces: 1. Switch the power to the cooktop off at the wall. 2. Hold the blade or utensil at a 30° angle and scrape the soiling or spill to a cool area of the cooktop. 3. Clean the soiling or spill up with a dish cloth or paper towel. 4. Follow steps 2 to 4 for ‘ev...
Page 25
25 some pans make crackling or clicking noises. This may be caused by the construction of your cookware (layers of different metals vibrating differently). This is normal for cookware and does not indicate a fault. The induction hob makes a low humming noise when used on a high heat setting. This is...
Page 26: Technical Specification
26 display board and the main board is fail e1/e2 abnormal supply voltage please inspect whether power supply is normal. Power on after the power supply is normal. E3/e4 temperature sensor of the ceramic glass plate is high please restart after the induction hob cools down. E5 temperature sensor of ...
Page 27
27 preserved around the hole. Be sure the thickness of the work surface is at least 30mm . Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate. As shown below: l(mm) w(mm) h(mm) d(mm) a(mm) b(mm) x(mm) 590 520 60 56 560+4 +1 4...
Page 28
28 before you install the hob, make sure that • the work surface is square and level, and no structural members interfere with space requirements • the work surface is made of a heat-resistant material • if the hob is installed above an oven, the oven has a built-in cooling fan • the installation wi...
Page 29: Cautions
29 cautions 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. 2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer, as th...
Page 30
30 • if the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated tools to avoid any accidents. • if the appliance is being connected directly to the mains an omnipolar circuit-breaker must be installed with a minimum opening of 3mm between cont...
Page 31: Guarantee
Guarantee this appliance is covered by a full manufacturer’s 2 year parts and 2 year labour guarantee and covers all parts and labour costs associated with the repair of the appliance in a domestic environment. We will repair any defect that arises due to faulty materials or workmanship and use genu...
Page 32: Useful Contacts
Useful contacts useful contacts technical support apelson appliances uk ltd phone: 0844 800 1128 email: uksupport@apelson.Co.Uk web: www.Myspareparts.Co.Uk spares apelson appliances uk ltd phone: 0844 800 1128 email: uksupport@apelson.Co.Uk web: www.Myspareparts.Co.Uk service and guarantee apelson a...