1. DL manuals
  2. WaterLogic
  3. Water Dispenser
  4. infiniti
  5. Operating, Installation And Service Manual

WaterLogic infiniti Operating, Installation And Service Manual

Summary of infiniti

  • Page 1

    Waterlogic 77 mccullough drive – suite 9 new castle, de 19720 (888) 826-6597 tech portal website: www.Techportal.Waterlogic.Com infiniti operating, installation, and service manual.

  • Page 2

    Infiniti operating, installation, and service manual page 2 - revision: 9-15-2016 waterlogic infiniti operating, installation, and service manual congratulations on your choice of the waterlogic infiniti water treatment system, water treatment system. The infiniti water treatment system, model dispe...

  • Page 3

    Infiniti operating, installation, and service manual page 3 - revision: 9-15-2016 waterlogic infiniti features and benefits ambient, cold and hot water cold and hot selections, which can be changed to ambient and cold settings to meet a wide range of customer demands. High volume storage and water c...

  • Page 4

    Infiniti operating, installation, and service manual page 4 - revision: 9-15-2016 waterlogic infiniti certifications waterlogic water treatment systems have been tested, and certified to rigorous nsf and ul standards. We believe that performance testing and certifications validate waterlogic as a wo...

  • Page 5

    Infiniti operating, installation, and service manual page 5 - revision: 9-15-2016 introduction carefully read and follow all instructions to ensure proper and efficient operation of your infiniti water treatment system. Contact waterlogic or an authorized waterlogic dealer if you have any questions....

  • Page 6

    Infiniti operating, installation, and service manual page 6 - revision: 9-15-2016 safety precautions basic safety precautions should be followed, including the following: danger! If incorrectly installed, operated or maintained, this product can cause death or severe injury. Those who install, opera...

  • Page 7

    Infiniti operating, installation, and service manual page 7 - revision: 9-15-2016 model/part designations brand name description model - part number infiniti cold and hot charcoal and silver tower waterlogic infiniti - cold and hot –tower iihcrc f-5001-fs-hc-tt-cs-ion infiniti cold and hot charcoal ...

  • Page 8

    Infiniti operating, installation, and service manual page 8 - revision: 9-15-2016 operating instructions the above picture shows front led and control panel for the waterlogic infiniti water treatment system, water treatment systems. Button operational use cold water - press dispensing button to sta...

  • Page 9

    Infiniti operating, installation, and service manual page 9 - revision: 9-15-2016 hot tank principles of operation all waterlogic hot tanks have a built in vent or expansion chamber in the top of the tank except for wl270 (gf) units. The vent chamber allows for expansion of the water when it is heat...

  • Page 10

    Infiniti operating, installation, and service manual page 10 - revision: 9-15-2016 waterlogic infiniti water treatment system, water flow diagram water in solenoid valve w ater o ut fa uc et condenser compressor filter dryer cold tank hot ta nk.

  • Page 11

    Infiniti operating, installation, and service manual page 11 - revision: 9-15-2016 programming instructions changing energy saver mode to non energy saving mode infiniti uv water treatment system comes programmed to energy saver mode. To turn off the energy saving mode, move the jumper on ch6 from p...

  • Page 12

    Infiniti operating, installation, and service manual page 12 - revision: 9-15-2016 pre-installation procedures danger! Electrical shock hazard. Only qualified personnel who have read and understand this entire manual should attempt to install, or service this unit, failure to do so could result in d...

  • Page 13

    Infiniti operating, installation, and service manual page 13 - revision: 9-15-2016 sanitizing sanitize using a household bleach (5.25% sodium hypochlorite solution) or other approved cleaner throughout the cold water circuit. Follow all instructions on the sanitizer and flush with fresh water throug...

  • Page 14

    Infiniti operating, installation, and service manual page 14 - revision: 9-15-2016 warning! Use personal protective equipment. Gloves and eye protection required. The first 2 or 3 gallons of water will contain concentrated sanitizer. Use extreme care! Fill the hot tank 16. Press the hot water select...

  • Page 15

    Infiniti operating, installation, and service manual page 15 - revision: 9-15-2016 waterlogic infiniti counter top draining instructions draining notes drain the waterlogic infiniti water treatment system for transportation. Warning! Store unit empty. Always sanitize before reuse. The unit must be c...

  • Page 16

    Infiniti operating, installation, and service manual page 16 - revision: 9-15-2016 waterlogic infiniti drainingtower instructions draining notes drain the waterlogic infiniti water treatment system, for transportation. Warning! Store unit empty. Always sanitize before reuse. The unit must be complet...

  • Page 17

    Infiniti operating, installation, and service manual page 17 - revision: 9-15-2016 drain the cold water tank and circuit 3. Remove lower front panel to access tank feed lines. 4. Loosen the two screws holding the filter head bracket to remove filter head bracket to access rear of filter heads. 5. Di...

  • Page 18

    Infiniti operating, installation, and service manual page 18 - revision: 9-15-2016 installation procedures safety and installation guidelines ensure all local, state, and federal laws and codes including health and safety guidelines are met when installing waterlogic equipment. Only qualified servic...

  • Page 19

    Infiniti operating, installation, and service manual page 19 - revision: 9-15-2016 1. Attach the water supply line to the 1/4” feed water inlet bulkhead fitting on the back of the unit. Waterlogic requires the use of a water pressure regulator. Water feed pressure must be between 40-60 psi. Turn on ...

  • Page 20

    Infiniti operating, installation, and service manual page 20 - revision: 9-15-2016 adjusting cold set point cold water temperature – factory set point is 41°f (5°c) and can be adjusted to 34°f - 54°f (1.1°c to 12.2°c) the cold set point can be adjusted by accessing the cold thermostat adjustment scr...

  • Page 21

    Infiniti operating, installation, and service manual page 21 - revision: 9-15-2016 replacement components component part no. Frequency of replacement hot tank (factory set point of 185°f - 85°c) 1.6 liter capacity ht-3024 replace every 3-5 years depending on usage. Wlcp pn 10-4029 replacement parts ...

  • Page 22

    Infiniti operating, installation, and service manual page 22 - revision: 9-15-2016 hot tank descaling instructions the hot tank requires removal of mineral deposits (descaling) on a regular basis. Typically descaling should take place every 6 to 12 months to preserve the long-term health of your uni...

  • Page 23

    Infiniti operating, installation, and service manual page 23 - revision: 9-15-2016 5. Allow descaling solution to remain in the hot tank for 15 minutes (length of time may vary depending on water conditions). 6. Place a pitcher, catch basin or other container under the faucet of the infiniti water t...

  • Page 24

    Infiniti operating, installation, and service manual page 24 - revision: 9-15-2016 resetting the hot tank overload or high limit safety 1. Red compressor/heater switch must be in the o=off position 2. Unplug the power cord from rear of unit. 3. Remove the lower front panel of unit by removing the ph...

  • Page 25

    Infiniti operating, installation, and service manual page 25 - revision: 9-15-2016 6. For demonstrative purposes, photos below have lowered the hot tank from the unit. Press the reset button 7. Reattach the protective metal box by depressing the top flap of the protective metal box so it snaps back ...

  • Page 26

    Infiniti operating, installation, and service manual page 26 - revision: 9-15-2016 waterlogic infiniti parts drawing and parts list wetted parts.

  • Page 27

    Infiniti operating, installation, and service manual page 27 - revision: 9-15-2016 waterlogic infiniti parts drawing and parts list no part no description 1 st-8236 side panel – charcoal counter top only st-8153 side panel – charcoal tower only 2 pu-4028-a bulkhead union ¼” x ¼” john guest p/n pi120...

  • Page 28

    Infiniti operating, installation, and service manual page 28 - revision: 9-15-2016 8 pl-1163-l00-si drip tray grill - silver 9 pl-1162-l00-si drip tray - silver - no logo 10 pl-1160 bottom front insert panel – silver tower only 11 pl-1159 bottom front panel – charcoal tower only 12 pl-1011 faucet co...

  • Page 29

    Infiniti operating, installation, and service manual page 29 - revision: 9-15-2016 15.1 cu-0001 solenoid cushion 16 st-8239 filter bracket counter top only st-8138 filter bracket – assembled to st-8248 tower only pl-1208-cn rubber o-ring for st-8138 filter bracket tower only 17 co-9001-a compressor ...

  • Page 30

    Infiniti operating, installation, and service manual page 30 - revision: 9-15-2016 el-5074-a leak sensor wire tower only 19.3 st-8207-cn leak containment tray clip sensor – 0.5mm 19.4 el-0090-l00-00 main wire harness with leak detection counter top only el-0089-l00-00 main wire harness with leak det...

  • Page 31

    Infiniti operating, installation, and service manual page 31 - revision: 9-15-2016 24.1 ht-3012 overload with manual reset - 221° f/105° c 25 ct-2060 cold tank – 2l counter top only ct-2017 cold tank – 4l tower only 25.1 pl-1128 uv lamp retaining threaded nut counter top only 25.2 ct-2001-b uv lamp ...

  • Page 32

    Infiniti operating, installation, and service manual page 32 - revision: 9-15-2016 30 ct-2016 cold water thermostat (also supplied in cold tank ct-2060) 30.1 lp-0326-l00-00 cold thermostat cover label 31 st-8328 back panel counter top only st-8154 back panel tower only 32 co-9031 wire condenser coun...

  • Page 33

    Infiniti operating, installation, and service manual page 33 - revision: 9-15-2016 infiniti electrical diagram danger! High voltage electrical hazard. Pcb (printed circuit board) contains high voltage. Only trained and qualified technicians should attempt live testing..

  • Page 34: Fault Code Index

    Infiniti operating, installation, and service manual page 34 - revision: 9-15-2016 fault code index 1. Leak detector alarm - dispense buttons all flash at same time fault code: leak detector alarm - dispense buttons all flash at same time. Possible reason solution water exiting drip tray due to bein...

  • Page 35

    Infiniti operating, installation, and service manual page 35 - revision: 9-15-2016 cold water troubleshooting index 1. Cold water is not cold (41° +/- 5° f) cold water is not cold (41° +/- 5° f) possible reason solution no power or refrigeration elements check that the red heater and power switch is...

  • Page 36

    Infiniti operating, installation, and service manual page 36 - revision: 9-15-2016 heating troubleshooting index hot water problems 1. Hot water is not hot 185° +/- 5° also includes related instructions for resetting the hot tank overload or high limit safety hot water is not hot (185° +/- 5° f) not...

  • Page 37

    Infiniti operating, installation, and service manual page 37 - revision: 9-15-2016 loose or improperly connected wire(s) to the heating element / hot tank. Visually inspect wire leads gong to the hot tank; confirm proper connections to the heating elements. Hot tank life is 3-5 years, depending on u...

  • Page 38

    Infiniti operating, installation, and service manual page 38 - revision: 9-15-2016 resetting the hot tank overload or high limit safety 1. Red compressor/heater switch must be in the o=off position 2. Unplug the power cord from rear of unit. 3. Remove the lower front panel of unit by removing the ph...

  • Page 39

    Infiniti operating, installation, and service manual page 39 - revision: 9-15-2016 6. For demonstrative purposes, photos below have lowered the hot tank from the unit. Press the reset button 7. Reattach the protective metal box by depressing the top flap of the protective metal box so it snaps back ...

  • Page 40

    Infiniti operating, installation, and service manual page 40 - revision: 9-15-2016 power troubleshooting index 1. Red heater and power switch won't light and the red led on the front won't light 2. Red heater and power switch is lit but the red led on the front is not lit 3. Compressor runs but does...

  • Page 41

    Infiniti operating, installation, and service manual page 41 - revision: 9-15-2016 red power switch is lit but the red led on the front is not lit possible reason solution bad transformer replace transformer black power connector to the pcb is not properly connected properly connect. Bad front pcb r...

  • Page 42

    Infiniti operating, installation, and service manual page 42 - revision: 9-15-2016 compressor is not running possible reason solution red heater and power switch on unit is in the off position turn red heater and power switch on. I = on compressor starting circuit turn red heater and power switch of...

  • Page 43

    Infiniti operating, installation, and service manual page 43 - revision: 9-15-2016 dispensing troubleshooting index 1. Irregular / intermittent dispensing 2. Dispensing won't stop when not holding the dispensing button 3. Steady drip out of faucet 4. Hot water or steam coming out of both the faucet ...

  • Page 44

    Infiniti operating, installation, and service manual page 44 - revision: 9-15-2016 irregular / intermittent dispensing possible reason solution too much water pressure. Recommend 40 to 60 psi for infiniti water treatment system, to operate properly. Check water pressure at the inlet bulkhead with a ...

  • Page 45

    Infiniti operating, installation, and service manual page 45 - revision: 9-15-2016 steady drip out of faucet possible reason solution debris in solenoid inspect solenoid for debris and clean out as needed. Hot water or steam coming out of both the faucet and vent hole possible reason solution improp...

  • Page 46

    Infiniti operating, installation, and service manual page 46 - revision: 9-15-2016 restricted flow of hot water possible reason solution partially closed water supply valve to the unit. Open water supply valve. Hot tank outlet hole is scaled over. Descale tank. See hot tank descaling instructions th...

  • Page 47

    Infiniti operating, installation, and service manual page 47 - revision: 9-15-2016 hot water drip out of faucet possible reason solution small outlet vent hole susceptible to scale build up. Descale tank. See hot tank descaling instructions that are included further below in this troubleshooting sec...

  • Page 48

    Infiniti operating, installation, and service manual page 48 - revision: 9-15-2016 dispenses hot and cold water at the same time possible reason solution hot or cold solenoid is stuck open. Remove top cover. Check hot solenoid: dispense cold water and visually inspect tubing for water flow from both...

  • Page 49

    Infiniti operating, installation, and service manual page 49 - revision: 9-15-2016 water does not dispense from unit possible reason solution closed water supply valve open the water supply valve. The unit is not properly plugged into electrical outlet check electrical outlet connection, or for blow...

  • Page 50

    Infiniti operating, installation, and service manual page 50 - revision: 9-15-2016 small amount of water periodically dispenses from faucet automatically possible reason solution cold or hot water solenoid valve malfunction inspect valve components for proper function. Replace as necessary. Obstruct...

  • Page 51

    Infiniti operating, installation, and service manual page 51 - revision: 9-15-2016 run on – water continues to dispense out of faucet after releasing the dispense button reason “run on” or “carry on” is present in all waterlogic pressure fed units without outlet solenoids. “run on” is defined is the...

  • Page 52

    Infiniti operating, installation, and service manual page 52 - revision: 9-15-2016 hot tank descaling instructions the hot tank requires removal of mineral deposits (descaling) on a regular basis. Typically descaling should take place every 6 to 12 months to preserve the long-term health of your uni...

  • Page 53

    Infiniti operating, installation, and service manual page 53 - revision: 9-15-2016 13. Allow descaling solution to remain in the hot tank for 15 minutes (length of time may vary depending on water conditions). 14. Place a pitcher, catch basin or other container under the faucet of the infiniti water...

  • Page 54

    Infiniti operating, installation, and service manual page 54 - revision: 9-15-2016 waterlogic manufactured water treatment system limited warranty united states and canada only waterlogic water treatment systems are guaranteed to the original purchaser to be free of defects in materials and workmans...