WaterLogic WL 1000 GF Technical Manual

Summary of WL 1000 GF

  • Page 1

    Waterlogic 1000 gf technical manual - issue a, july 2011 wl 1000 gf technical manual.

  • Page 2

    2 3 waterlogic 1000 gf technical manual - issue a, july 2011 index machine overview 4 filter parts layout - hot, cold and ambient 8 main parts layout 10 pre delivery inspection (pdi) 16 installation 18 operating instructions 21 maintenance and service 23 reverse osmosis specification 25 sanitization...

  • Page 3: Machine Overview

    4 5 waterlogic 1000 gf technical manual - issue a, july 2011 5 machine overview waterlogic 1000 gf cold tank capacity (4 litres) the cold tank is manufactured from 304 stainless steel which is noncorrosive and inert. The temperature of the cold tank is controlled by a mechanical thermostat located o...

  • Page 4

    6 7 waterlogic 1000 gf technical manual - issue a, july 2011 reverse osmosis filters the filtration system is a 4-stage system, consisting of sediment, pre-carbon, reverse osmosis membrane, and post carbon filters. Reverse osmosis water pump the 1000 gf is fitted with a water pump and pressure switc...

  • Page 5: Filter Parts Layout

    8 9 waterlogic 1000 gf technical manual - issue a, july 2011 filter parts layout hot, cold and ambient hot tank in (water) hot water out compressor sediment pre carbon membrane post carbon cold water out ambient water out low pressure valve cold tank inlet solenoid valve waste water controller filte...

  • Page 6: Main Parts Layout

    10 11 waterlogic 1000 gf technical manual - issue a, july 2011 main parts layout hot, cold and ambient 2 7 12 11 10 9 6 5 3 4 8 29 20 21 26 23/24 25 28 13 14 15 16 17 1 18 19 22 27 item description 1 handle 2 side panel 3 top cover 4 led label 5 power indicator 6 chilling indicator 7 heating indicat...

  • Page 7: Main Parts Layout

    12 13 waterlogic 1000 gf technical manual - issue a, july 2011 main parts layout hot, cold and ambient 1 2 3 4 5 7 8 9 11 12 31 32 34 42 383736 39 48 44 45 46 50 51 52 53 49 49 57 58 59 60 69 70 66 65 68 67 64 63 62 78 77 76 75 73 72 71 74 79 80 81 61 56 54 55 47 41 40 43 35 33 29 30 13 14 15 25 26 ...

  • Page 8: Main Parts Layout

    14 15 waterlogic 1000 gf technical manual - issue a, july 2011 item description 1 top cover 2 led cover label 3 front hatch 4 faucet bkt 5 ambient water push button 6 cold water push button 7 hot safety push button 8 hot water push button 9 front upper panel 10 drip tray grill 11 drip tray body 12 f...

  • Page 9: Pre Delivery Inspection

    16 17 waterlogic 1000 gf technical manual - issue a, july 2011 pre delivery inspection procedures (pdi) cautions: only competent trained technicians should work on waterlogic products. Waterlogic units may weigh over 25kg. We recommend caution when lifting. Packing materials could present a trip haz...

  • Page 10: Installation Procedure

    18 19 waterlogic 1000 gf technical manual - issue a, july 2011 installation procedure important notice this procedure should only be carried out by a technician trained by waterlogic international or by an approved distributing agent. Note: this appliance is intended for indoor use only. Cleaning of...

  • Page 11: Operating Instructions

    20 21 waterlogic 1000 gf technical manual - issue a, july 2011 installation kit waterlogic recommend that you use a waterlogic installation kit that includes a pressure reducer set to 45 psi, a non-return valve, a waterlogic block leak shut off and this technical manual. Allow 1 hour to complete ins...

  • Page 12: Maintenance And Servicing

    22 23 waterlogic 1000 gf technical manual - issue a, july 2011 cold water push main button, led shows green, it dispenses cold water. Ambient water push ambient button led shows red, push main button it dispenses ambient water. Hot water push hot water button led shows red, push main button, it disp...

  • Page 13

    24 25 waterlogic 1000 gf technical manual - issue a, july 2011 6. To sanitise the cold tank introduce sanitisation fluid or a chlorine tablet through the uv port directly into the cold tank before putting the quartz sleeve back in place. 7. Refit the quartz sleeve and replace the uv lamp and reconne...

  • Page 14

    26 27 waterlogic 1000 gf technical manual - issue a, july 2011 sanitising 6 month sanitisation procedure please ensure that you do not accidentally drop sanitizer fluid on any of the wl 1000 gf’s water or electrical connections or allow sanitizer to enter the hot tank. 1. Turn off the water supply a...

  • Page 15: Technical Specifications

    28 29 waterlogic 1000 gf technical manual - issue a, july 2011 technical specifications and warranties safety subject to the standard terms and conditions of sale (a copy of which has been provided to you), neither waterlogic international limited (“waterlogic”), nor any affiliated companies shall b...

  • Page 16: Wetted Parts Illustration

    30 31 waterlogic 1000 gf technical manual - issue a, july 2011 wetted parts illustration hot, cold and ambient 1 2 4 5 7 12 13 14 15 11 10 9 6 8 3 16 41 22 23 24 37 38 44 17 18 46 19 21 20 25 31 40 27 26 30 36 29 28 33 34 35 43 42 39 32 45 item part number description 1 pu-4104 jg adaptor 1/4" (ci32...

  • Page 17: End Of Life

    32 33 waterlogic 1000 gf technical manual - issue a, july 2011 end of life non eu countries at the end of this product’s life, please ensure that it is disposed of in an environmentally friendly manner which is in line with your country requirements/ guidelines. Weee (eu only) please be aware that o...

  • Page 18

    34 e n g 00 6 5 -1 9 /1 2 /1 2 wli trading ltd. Suite 4, 2nd floor beacon court, sandyford, dublin 18, ireland www.Waterlogic.Com waterlogic usa, 4141 n. 156th street, omaha, ne 68116 speak to a water expert rest of the world exportsales@waterlogic.Com + 353 1 293 1960 usa, canada and mexico info@wa...