Summary of WL Cube Firewall
Page 1
Wl cube firewall technical manual version 1.
Page 2
The cube technical manual - version 1, may 2014 2 3 declaration waterlogic international ltd 1. The installation, maintenance and sanitizing procedures must be carried out by persons trained by waterlogic international or their approved distributors. Do not remove any panels or covers unless accepta...
Page 3: Machine Overview
The cube technical manual - version 1, may 2014 4 5 machine overview the cube hot tank the hot water temperature is controlled by a microprocessor and is set to 87°c for standard and 95°c for extra hot. A thermal cut out is fitted to the hot tank to prevent overheating. Setting the hot water tempera...
Page 4
The cube technical manual - version 1, may 2014 6 7 plastic panels the molded panels are made from recyclable abs plastic. All the abs plastic panels are uv resistant and meet the standards of ce and ul. Please note that the cube should not be exposed to direct sunlight. Placing the cube in direct s...
Page 5: Pre Delivery
8 9 pre delivery inspection procedures (pdi) caution: only competent trained technicians should work on waterlogic products. Waterlogic units may weigh over 25kg. We recommend caution when lifting. Packing materials could present a trip hazard. Keep them off the floor. Take care not to allow the pow...
Page 6: Installation Procedures
The cube technical manual - version 1, may 2014 10 11 1. Remove packing straps and unpack unit and visually inspect for any damage. (report any defects to waterlogic as soon as possible). 2. Place the unit on a suitable work bench. 3. Open the top cover by removing the two screws that fix it in plac...
Page 7
The cube technical manual - version 1, may 2014 12 13 7. The hot water tank now needs to be filled, this is done by selecting the hot water icon, then followed immediately by pressing and holding the main dispense button until the tank has completely filled and water is being dispensed. Flush throug...
Page 8: Operating Instructions
The cube technical manual - version 1, may 2014 14 15 energy saving feature the cube has an energy saving feature that minimizes power consumption when the machine has not been operated for 3 hours. If the sleep mode on the cube has been deactivated, the machine will automatically enter sleep mode a...
Page 9: Maintenance And Servicing
The cube technical manual - version 1, may 2014 16 17 maintenance and servicing • the cube must be serviced every 12 months, but we strongly recommend the uv lamp and filters be changed every six months. • the cube may require any calcium build up in the hot tank to be removed, this depends on the l...
Page 10
The cube technical manual - version 1, may 2014 18 19 4. Remove the top cover from the cube by undoing the two screws located at the back of the machine, then slide the panel backwards and lift up. 5. Take out the filter by un-clicking the loop at the top of the housing and pulling it in an upward m...
Page 11
The cube technical manual - version 1, may 2014 20 21 selecting the cold option until the water stops being dispensed. Isolate the power to the machine by switching the red switch at the rear of the machine off and removing the power lead. 12. Remove the top cover from the machine. Then take out the...
Page 12
The cube technical manual - version 1, may 2014 22 23 fault finding all fault finding procedures must be carried out by a technician trained by waterlogic international or their nominated distributor. Please take great care and suitable health and safety measures when fault finding on live electrica...
Page 13: Technical Specifications
The cube technical manual - version 1, may 2014 24 25 technical specifications and warranties safety subject to the standard terms and conditions of sale (a copy of which has been provided to you), neither waterlogic international limited (“waterlogic”), nor any affiliated companies shall be liable ...
Page 14: End of Life
The cube technical manual - version 1, may 2014 26 27 electrical wiring diagram 120v end of life non eu countries at the end of this products life, please ensure that it is disposed of in an environmentally friendly manner which is in line with your country requirements/guidelines. Weee (eu only) pl...
Page 15: Dip Switch Setup
The cube technical manual - version 1, may 2014 28 29 electrical wiring diagram 230v dip switch setup danger high voltages present on this pcb care must be taken when live testing the cube main pcb dip switches 1 & 2 with instructions dip switch 1 dip switch 2.
Page 16: Dip Switch Setup
The cube technical manual - version 1, may 2014 30 31 dip switch setup filter timer setting a combination of dip switches 2 & 3 is used to enter this setup. • 3month • 6month • 12month • no filter timer uv setting • cs = cds sensor (used in europe) • us = uv sensor cold water temperature setting col...
Page 17: Wetted Parts List
The cube technical manual - version 1, may 2014 32 33 wetted parts list hot, cold and ambient n° part description 1 jg bulkhead connector union 1/4" * 1/4" 2 jg lld pe tube - blue o.D.1/4" 3 jg lld pe tube - blue o.D.1/4" 4 jg stem elbow connector 1/4" * 1/4" 5 solenoid valve 24 dc (single spring lo...
Page 18: Wetted Parts List
The cube technical manual - version 1, may 2014 34 35 wetted parts list hot, cold and sparkling n° part description 30 silicon tube 5/16" for hot water 31 jg end stop 1/4" 32 jg lld pe tube - blue o.D.1/4" 33 jg equal tee connector 1/4" 34 jg 1/4" stopper jg uk 35 jg equal tee connector 1/4" 36 jg l...
Page 19: Main Parts List
The cube technical manual - version 1, may 2014 36 37 n° part description 1 wl cube side panel left -silver 2 mark iv al (mirror/no gauze/spout 18mm) for cube 3 wl cube fw fixing bracket 4 wl cube front frame panel-black 5 wl cube front cover -silver 6 wl cube spout assembly bracket-silver 7 wl cube...
Page 20
The cube technical manual - version 1, may 2014 38 39 n° part description 31 drain valve cap only (for 5/16" & 1/4" size) 32 electronic fixing bracket wl cube 33 wl cube top cover- black 34 5/16-1/4 reducing straight connector 35 filter bracket 36 cbc 1 micron 10" filter ass’y-pd use-wl label 37 hot...
Page 21
40 eng0266-20/05/14 wli trading ltd. Suite 4, 2nd floor beacon court, sandyford, dublin 18, ireland www.Waterlogic.Com waterlogic usa, 11710 stonegate circle, omaha, ne 68164 speak to a water expert rest of the world exportsales@waterlogic.Com + 353 1 293 1960 usa, canada and mexico info@waterlogicu...