WaterLogic WL200 Operating, Installation And Service Manual

Summary of WL200

  • Page 1

    Waterlogic commercial products, llc 11710 stonegate circle omaha, ne 68164 (800) 288-1891 www.Waterlogic.Us tech portal website: http://techportal.Waterlogic.Com wl200 operating, installation, and service manual.

  • Page 2

    Wl200 operating, installation, and service manual page 2 ‐ revision: 4‐13‐2016 wl200 operating, installation, and service manual congratulations on your choice of the waterlogic wl200water treatment system. The wl200 model dispenses cold water. Every wl200 includes: bio‐cote anti‐microbial protectio...

  • Page 3

    Wl200 operating, installation, and service manual page 3 ‐ revision: 4‐13‐2016 wl200 features and benefits cold water waterlogic wl200 comes standard with cold water selection. High volume storage and water capacity tower model has 4 liters of cold water capacity. Counter top has 2 liters of cold wa...

  • Page 4

    Wl200 operating, installation, and service manual page 4 ‐ revision: 4‐13‐2016 wl200 certifications waterlogic water treatment systems have been tested, and certified to rigorous nsf and ul standards. We believe that performance testing and certifications validate waterlogic as a world‐ leader in wa...

  • Page 5

    Wl200 operating, installation, and service manual page 5 ‐ revision: 4‐13‐2016 introduction carefully read and follow all instructions to ensure proper and efficient operation of your wl200. Contact waterlogic or an authorized waterlogic dealer if you have any questions. Waterlogic and authorized wa...

  • Page 6

    Wl200 operating, installation, and service manual page 6 ‐ revision: 4‐13‐2016 safety precautions basic safety precautions should be followed, including the following: danger! If incorrectly installed, operated or maintained, this product can cause death or severe injury. Those who install, operate,...

  • Page 7

    Wl200 operating, installation, and service manual page 7 ‐ revision: 4‐13‐2016 model/part designations brand name description model ‐ part number wl200 counter top waterlogic wl200 counter top ‐ cold water f‐6002‐m‐c‐tt‐cs‐wlu 12‐wl200ct wl200 tower waterlogic wl200 tower ‐ cold water f‐6002‐fs‐c‐tt...

  • Page 8

    Wl200 operating, installation, and service manual page 8 ‐ revision: 4‐13‐2016 operating instructions the above picture shows front lcd display and control panel for the waterlogic wl200. For cold water: press the dispensing button. Dispensing button.

  • Page 9

    Wl200 operating, installation, and service manual page 9 ‐ revision: 4‐13‐2016 wl200 counter top water flow diagram.

  • Page 10

    Wl200 operating, installation, and service manual page 10 ‐ revision: 4‐13‐2016 water in filter dryer solenoid valve compressor condenser water out faucet wl200 tower water flow diagram.

  • Page 11

    Wl200 operating, installation, and service manual page 11 ‐ revision: 4‐13‐2016 adjusting cold set point the cold set point can be adjusted by accessing the cold thermostat adjustment screw under the decal at the rear of the unit. This will not void the warranty as the current decal states on the ba...

  • Page 12

    Wl200 operating, installation, and service manual page 12 ‐ revision: 4‐13‐2016 pre‐installation procedures danger! Electrical shock hazard. Only qualified personnel who have read and understand this entire manual should attempt to install, or service this unit, failure to do so could result in deat...

  • Page 13

    Wl200 operating, installation, and service manual page 13 ‐ revision: 4‐13‐2016 fill the cold circuit with sanitizer 5. Depress the main dispensing button on the front control panel until cold water/sanitizing solution comes out the faucet. Note: container and drain basin will be required to catch t...

  • Page 14

    Wl200 operating, installation, and service manual page 14 ‐ revision: 4‐13‐2016 flushing the sanitizer from the machine 10. Place a pitcher, catch basin, or other container under the faucet of the wl200. 11. Flush the cold tank. Run several gallons of water through the faucet by dispensing cold wate...

  • Page 15

    Wl200 operating, installation, and service manual page 15 ‐ revision: 4‐13‐2016 wl200 counter top draining instructions draining notes drain the wl200 for transportation. Warning! Store unit empty. Always sanitize before reuse. The unit must be completely drained and sealed before storing to avoid s...

  • Page 16

    Wl200 operating, installation, and service manual page 16 ‐ revision: 4‐13‐2016 8. Disconnect tubing from inlet elbow from solenoid and allow water to drain. 9. Reconnect tubing into inlet elbow, 10. Dry inside of unit. 11. Replace front panel..

  • Page 17

    Wl200 operating, installation, and service manual page 17 ‐ revision: 4‐13‐2016 wl200 tower draining instructions draining notes drain the wl200 for transportation. Warning! Store unit empty. Always sanitize before reuse. The unit must be completely drained and sealed before storing to avoid stagnat...

  • Page 18

    Wl200 operating, installation, and service manual page 18 ‐ revision: 4‐13‐2016 installation procedures safety and installation guidelines ensure all local, state, and federal laws and codes including health and safety guidelines are met when installing waterlogic equipment. Only qualified service t...

  • Page 19

    Wl200 operating, installation, and service manual page 19 ‐ revision: 4‐13‐2016 1. Attach the water supply line to the 1/4” feed water inlet bulkhead fitting on the back of the unit. Waterlogic requires the use of a water pressure regulator. Water feed pressure must be between 40‐60 psi. Turn on the...

  • Page 20

    Wl200 operating, installation, and service manual page 20 ‐ revision: 4‐13‐2016 service requirements warning! Read and understand the contents of this manual before attempting to service wl200. Failure to follow the instructions in this manual could result in death, serious personal injury, or sever...

  • Page 21

    Wl200 operating, installation, and service manual page 21 ‐ revision: 4‐13‐2016 wl200 counter top drawings with part numbers wetted parts.

  • Page 22

    Wl200 operating, installation, and service manual page 22 ‐ revision: 4‐13‐2016 no part no description wlusa part no. Stocked? 1 pl‐1249‐cn flat top cover ‐ charcoal with texture counter top only 12‐8060 yes 2 st‐0080‐l00‐00 high voltage metal cover (etl‐ certification) counter top only na no 3 ct‐2...

  • Page 23

    Wl200 operating, installation, and service manual page 23 ‐ revision: 4‐13‐2016 10 co‐9001‐a compressor (r134a 1/8hp) 120v/60hz 10‐2200 yes 11 st‐8151 bottom tray counter top only 12‐3170 yes 12 pl‐1251‐cn unit rubber feet counter top only 12‐3150 yes 13 pu‐4008‐a 1/4” union elbow john guest p/n p10...

  • Page 24

    Wl200 operating, installation, and service manual page 24 ‐ revision: 4‐13‐2016 17.2 pl‐1013 faucet nipple – blue with screen 10‐3048 yes 18 pl‐1146 front upper drip tray insert panel 12‐8050 yes 19 en‐6086 pcb for cold water 12‐8615 yes 20 pl‐1180‐cn pcb cover 12‐8605 yes 21 pl‐1100 silicon button ...

  • Page 25

    Wl200 operating, installation, and service manual page 25 ‐ revision: 4‐13‐2016 28 ct‐2062‐cn quartz sleeve (100mm) counter top only na no 29 ct‐2006 black o‐ring for quartz sleeve counter top only 10‐2500 yes 30 el‐5003‐a power transformer 120v 12‐3117 yes 31 st‐8150‐b upper shelf counter top only ...

  • Page 26

    Wl200 operating, installation, and service manual page 26 ‐ revision: 4‐13‐2016 wl200 tower drawings with part numbers wetted parts.

  • Page 27

    Wl200 operating, installation, and service manual page 27 ‐ revision: 4‐13‐2016 no part no description wlusa part no. Stocked ? 1 pl‐1150 top cover tower only 12‐8054 yes 2 el‐5016 power line noise filter, electromagnetic interference filter (emi) 10‐4013 yes 3 el‐5053 fuse holder and fuse 120v / 15...

  • Page 28

    Wl200 operating, installation, and service manual page 28 ‐ revision: 4‐13‐2016 11 st‐8137 bottom tray tower only 12‐8004 yes 12 st‐8167cn unit control rubber feet tower only 10‐3083 yes 13 pu‐4016 solenoid valve 1000 mm 12‐1500 yes 13.1 cu‐0001 solenoid cushion cu‐0001 yes 14 pu‐4008‐a 1/4” union e...

  • Page 29

    Wl200 operating, installation, and service manual page 29 ‐ revision: 4‐13‐2016 19.1 ct‐2007 natural faucet o‐ring – silicon white 10‐2600 yes 19.2 pl‐1013 faucet nipple – blue with screen 10‐3048 yes 20 pl‐1146 front upper drip tray insert panel 12‐8050 yes 21 en‐6086 pcb for cold water 12‐8615 yes...

  • Page 30

    Wl200 operating, installation, and service manual page 30 ‐ revision: 4‐13‐2016 28 en‐6111‐a leak detection pcb na no 28.1 en‐6059 pcb stand‐off pin 10‐3017 yes 29 ct‐2017 4l single cold tank assembly tower only 12‐1100 yes 30 el‐5003‐a power transformer 120v 12‐3117 yes 31 st‐8136‐r2 upper shelf to...

  • Page 31

    Wl200 operating, installation, and service manual page 31 ‐ revision: 4‐13‐2016 wl200 counter top electrical diagram danger! High voltage electrical hazard. Pcb (printed circuit board) contains high voltage. Only trained and qualified technicians should attempt live testing..

  • Page 32

    Wl200 operating, installation, and service manual page 32 ‐ revision: 4‐13‐2016 wl200 tower electrical diagram danger! High voltage electrical hazard. Pcb (printed circuit board) contains high voltage. Only trained and qualified technicians should attempt live testing..

  • Page 33

    Wl200 operating, installation, and service manual page 33 ‐ revision: 4‐13‐2016 cold water troubleshoot index 1. Cold water is not cold (41° +/‐ 5° f) cold water is not cold (41° +/‐ 5° f) possible reason solution no power or refrigeration elements check that the red power and compressor switch is o...

  • Page 34

    Wl200 operating, installation, and service manual page 34 ‐ revision: 4‐13‐2016 power troubleshooting index 1. Red power switch is lit but the red led on the front is not lit 2. Compressor runs but does not chill 3. Compressor is not running red power switch is lit but the red led on the front is no...

  • Page 35

    Wl200 operating, installation, and service manual page 35 ‐ revision: 4‐13‐2016 compressor is not running possible reason solution red power and compressor switch button on unit is in the off position turn red power and compressor switch on. I = on compressor starting circuit turn red power and comp...

  • Page 36

    Wl200 operating, installation, and service manual page 36 ‐ revision: 4‐13‐2016 dispensing troubleshooting index 1. Irregular / intermittent dispensing from one side 2. Dispensing won't stop when not holding the dispensing button 3. Steady drip out of faucet 4. Water does not dispense from unit 5. C...

  • Page 37

    Wl200 operating, installation, and service manual page 37 ‐ revision: 4‐13‐2016 irregular / intermittent dispensing possible reason solution too much water pressure. Recommend 40 to 60 psi for wl250 to operate properly. Check water pressure at the inlet bulkhead with a water pressure gauge. Addition...

  • Page 38

    Wl200 operating, installation, and service manual page 38 ‐ revision: 4‐13‐2016 steady drip out of faucet possible reason solution debris in solenoid inspect solenoid for debris and clean out as needed. Water does not dispense from unit possible reason solution closed water supply valve open the wat...

  • Page 39

    Wl200 operating, installation, and service manual page 39 ‐ revision: 4‐13‐2016 cold water dispenses from faucet and vent outlet simultaneously possible reason solution improper tubing attachment from the tank to faucet or vice versa verify tubing is connected properly from tank outlets to correct f...

  • Page 40

    Wl200 operating, installation, and service manual page 40 ‐ revision: 4‐13‐2016 run on – water continues to dispense out of faucet after releasing the dispense button reason “run on” or “carry on” is present in all waterlogic pressure fed units without outlet solenoids. “run on” is defined is the am...

  • Page 41

    Wl200 operating, installation, and service manual page 41 ‐ revision: 4‐13‐2016 waterlogic manufactured water treatment system limited warranty united states and canada only waterlogic water treatment systems are guaranteed to the original purchaser to be free of defects in materials and workmanship...