WaterMAXX WWD224bLK-1 Use & Care Manual - Cleaning Kit
IMPORTANT:Collectthewaterinacontainer,notthedriptray.Replacethedraincapandhandtightenonly.
3. Replacethewaterbottle(see Installing the Water Bottle on pg. 3).
Cleaning the Inside of the Dispenser
Topreventmineraldepositsthatcanaffectthetasteandflowofthewater,and
to ensure proper product performance, your water dispenser must be cleaned
every4months.
1. Unplug the power cord.
2. Removethewaterbottleandbottlesupportcollar.
3. Drain the reservoir (see Draining the Reservoir on pg. 5).
4. Pourawaterdispensercleaneroramixtureof4cups/1Lofvinegarwith
4cups/1Lofhotwaterintothereservoirandwait20minutes.Ifusinga
water dispenser cleaning solution, please follow the manufacturer's
instructions.
IMPORTANT: To avoid water overflow while cleaning the dispenser,
always remove the bottle support collar before pouring water or a cleaning
solution into the reservoir (see Figure A on pg. 3).
5. Press both dispensing taps until water no longer comes out.
IMPORTANT: Collect the water into a container, not the drip tray.
6. Rinsewithcleanwateranddrain(seedrainingthereservoir).
7. Replacethebottlesupportcollarandthewaterbottle(see Installing the Water Bottle on pg. 3).
IMPORTANT: Drain approximately 4 glasses of water from each tap before initial use. This does not need to be
done with replacement bottles.
Going Away on Vacation
When not using the dispenser for long periods of time or when going on vacation, unplug the dispenser and drain the
reservoir
(see Draining the Reservoir on pg. 5).FollowInitialProductCleaningProceduresuponreturnandstartupof
the dispenser.
SPECIFICATIONS
Cleaning Kit
Available online at
www.greenwayhp.com
WWD224W-1/BLK-1
Outputperhr:
Cold
0.5gal/2.0L
InternalTank:
Cold
0.8gal/3.2L
CoolingTemp(approx.):
8°C/46°F
PowerConsumption:
Cold
83W/1.0A/115V
5
6