1. DL manuals
  2. Waters Network Systems
  3. Switch
  4. GSM1008-2SFP
  5. Operating Manual

Waters Network Systems GSM1008-2SFP Operating Manual

Summary of GSM1008-2SFP

  • Page 1

    12 operating manual gsm2108 and gsm1008-2sfp corporate headquaters manufacturing/customer service 5001 american blvd. W., suite 605 945 37 th avenue, nw bloomington, mn 55437 rochester, mn 55901 phone: 800.441.5319 phone: 800.328.2275 phone: 952.831.5603 phone: 507.252.1951 fax: 952.831.5605 fax: 50...

  • Page 2

    Waters network systems user’s manual page 2 gsm-2108/gsm-1008sfp table of contents 1.0 specifications ........................................................................................................................... 4 2.0 package contents.......................................................

  • Page 3

    Waters network systems user’s manual page 3 gsm-2108/gsm-1008sfp 5.20 t runking c onfiguration ......................................................................................................... 78 5.21 802.1x c onfiguration ........................................................................

  • Page 4

    Waters network systems user’s manual page 4 gsm-2108/gsm-1008sfp 1.0 specifications operational characteristics mac address table 8k switching mode store-and-forward memory buffer size 144kb jumbo frame support performance non-blocking wire speed auto negotiation auto-mdix back pressure flow control...

  • Page 5

    Waters network systems user’s manual page 5 gsm-2108/gsm-1008sfp rj45 shielded female ports 10/100mbps: cat5 utp or better mm or sm with lc connectors power supply: internal power supply input voltage 100 to 240 vac, 50 to 60hz power consumption 30 watts maximum operating environment ambient tempera...

  • Page 6

    Waters network systems user’s manual page 6 gsm-2108/gsm-1008sfp 2.0 package contents examine the shipping container for obvious damage prior to installing this product. Notify the carrier of any damage that you believe occurred during shipment. Ensure that the items listed below are included. If an...

  • Page 7

    Waters network systems user’s manual page 7 gsm-2108/gsm-1008sfp 3.2 software features the following lists management highlights of the gsm switch: supports per port traffic counters provides the status of each port and allows for port configuration supports per port traffic monitoring counters supp...

  • Page 8

    Waters network systems user’s manual page 8 gsm-2108/gsm-1008sfp 3.3 hardware description there are eight 10/100/1000 copper and two sfp fiber ports for optional removable modules on the front panel of the switch. The leds, located on the left side of the front panel, contains a power led indicating...

  • Page 9

    Waters network systems user’s manual page 9 gsm-2108/gsm-1008sfp the following table provides the status and description of the leds: led color function system led power green lit when +5v dc power is on and good cpu led green blinks when cpu is active 10/100/1000ethernet tp port 1 to 8 led link/act...

  • Page 10

    Waters network systems user’s manual page 10 gsm-2108/gsm-1008sfp 3.6 installation choose a surface for your switch that is clean, smooth and near a power outlet. Make sure that there is enough clearance around the switch to allow attachment of cables, power cord and air circulation. 1. Plug in the ...

  • Page 11

    Waters network systems user’s manual page 11 gsm-2108/gsm-1008sfp the following table describes the cable and devices’ bit-time delay (round trip): 1000base-x tp, fiber 100base-tx tp 100base-fx fiber round trip delay: 4096 round trip delay: 512 cat5 11.12/m cat5 1.12/m fiber cable: 1.0/m fiber 10.10...

  • Page 12

    Waters network systems user’s manual page 12 gsm-2108/gsm-1008sfp 1. As a member of a vlan, you cannot be a member of a vlan in another switch. 2. As a member of a vlan, you cannot access a member of another vlan. 3. The switch manager has to assign different names for each vlan group at one switch....

  • Page 13

    Waters network systems user’s manual page 13 gsm-2108/gsm-1008sfp 4.0 network applications there are three ways to access switch management functions: 1. Rs-232 serial port connection (cli) 2. Telnet 3. Web note: before accessing management functions through telnet or the web, you must modify the ip...

  • Page 14

    Waters network systems user’s manual page 14 gsm-2108/gsm-1008sfp 4.2 configuring ip, subnet mask and default gateway the default settings for your switch are listed in the following table: default value gsm2108/gsm1008 ip address 192.168.1.1 subnet 255.255.255.0 default gateway 192.168.1.254 table ...

  • Page 15

    Waters network systems user’s manual page 15 gsm-2108/gsm-1008sfp once you have set the ip address of the switch, you must save the configuration. The cli command is: save start . A detailed list of cli commands can be found in section 6.0. 4.3 configuring the switch via the web you can configure an...

  • Page 16

    Waters network systems user’s manual page 16 gsm-2108/gsm-1008sfp 4.4 ip address assignment figure. 4-3 - login screen via a web browser for ip address configuration, the following three parameters are required: ip address subnet mask default gateway and dns. Ip address: the address of the network d...

  • Page 17

    Waters network systems user’s manual page 17 gsm-2108/gsm-1008sfp 0 class b: ip address range between 128.0.0.0 and 191.255.255.255. Each class b network has a 16-bit network prefix followed 16-bit host address. There are 16,384 (2^14)/16 networks able to be defined with a maximum of 65534 (2^16 –2)...

  • Page 18

    Waters network systems user’s manual page 18 gsm-2108/gsm-1008sfp networks. For a class b network, 128.1.2.3, the subnet mask 255.255.0.0 in default, in which the first two bytes are all 1s. This means more than 60 thousands of nodes in flat ip address will be at the same network. This is too large ...

  • Page 19

    Waters network systems user’s manual page 19 gsm-2108/gsm-1008sfp prefix length no. Of ip matched no. Of addressable ip /32 1 - /31 2 - /30 4 2 /29 8 6 /28 16 14 /27 32 30 /26 64 62 /25 128 126 /24 256 254 /23 512 510 /22 1024 1022 /21 2048 2046 /20 4096 4094 /19 8192 8190 /18 16384 16382 /17 32768 ...

  • Page 20

    Waters network systems user’s manual page 20 gsm-2108/gsm-1008sfp for assigning an ip address to the switch, check the ip address of the network that will be connected to the switch. Use the same network address and append your host address. Figure 4.4 – ip configuration first, ip address: as shown ...

  • Page 21

    Waters network systems user’s manual page 21 gsm-2108/gsm-1008sfp 5.0 web based management this section illustrates the configuration and management of the gsm switch through a web interface. Management through the web interface allows you to easily access and monitor the switch through any port. Th...

  • Page 22

    Waters network systems user’s manual page 22 gsm-2108/gsm-1008sfp figure 5.1 – login screen 5.1 overview of web management once you have logged into the switch, the opening screen displays the system information . On the left side of the screen, the function tree for all of the management functions ...

  • Page 23

    Waters network systems user’s manual page 23 gsm-2108/gsm-1008sfp figure 5.2 – system information the top of the screen displays the front panel of the switch. The linked ports will be displayed in green and the ports that are not connected will be dark. The optional modules will display a cover pla...

  • Page 24

    Waters network systems user’s manual page 24 gsm-2108/gsm-1008sfp management functions when you are finished. The auto logout default is set to three minutes. You may change the time by using the pull down list for auto logout. The system will automatically log out if there has been no activity duri...

  • Page 25

    Waters network systems user’s manual page 25 gsm-2108/gsm-1008sfp 5.2 system information function name: system information function description: show the basic system information. Parameter description: model name: the model name of this device. System description: describes the device. “l2 managed ...

  • Page 26

    Waters network systems user’s manual page 26 gsm-2108/gsm-1008sfp device port: show all types and numbers of the port in the switch. Ram size: the size of the dram in this switch. Flash size: the size of the flash memory in this switch. 5.3 ip configuration ip configuration is one of the most import...

  • Page 27

    Waters network systems user’s manual page 27 gsm-2108/gsm-1008sfp dhcp, refer to section 4.4 - ip address assignment . Default: disabled ip address: users can configure the ip settings and enter new values if users set the dhcp function to “disable”. Click the apply button to update. When dhcp is di...

  • Page 28

    Waters network systems user’s manual page 28 gsm-2108/gsm-1008sfp 5.4 time configuration the switch provides a manual and automatic method to set the system time via ntp. Manual setting is simple. Input “year”, “month”, “day”, “hour”, “minute” and “second” within the valid value range indicated in e...

  • Page 29

    Waters network systems user’s manual page 29 gsm-2108/gsm-1008sfp since it passed over. The switch supports valid configurable daylight saving time is –5 ~ +5 step one hour. The zero for this parameter means it need not have to adjust current time, equivalent to in-act daylight saving. You don’t hav...

  • Page 30

    Waters network systems user’s manual page 30 gsm-2108/gsm-1008sfp figure 5.5 – system time setting 5.5 account configuration only the administrator can create, modify or delete the username and password. The administrator can modify other guest identities’ password without confirming the password. G...

  • Page 31

    Waters network systems user’s manual page 31 gsm-2108/gsm-1008sfp through the management security configuration, the manager can perform the setup to control the switch and limit user to access the switch. The following rules are provided for the management of the switch: rule 1: if no lists exists,...

  • Page 32

    Waters network systems user’s manual page 32 gsm-2108/gsm-1008sfp connected by via http, telnet or snmp. Figure 5.7 – management security configuration parameter description: name: a name is composed of any letter (a-z, a-z) and digit (0-9) with maximal 8 characters. Vid: the switch supports two opt...

  • Page 33

    Waters network systems user’s manual page 33 gsm-2108/gsm-1008sfp 5.7 virtual stack function name: virtual stack function description: virtual stack management (vsm) is the group management function. Vsm configuration automatically groups switches in the same lan. One switch among the group will be ...

  • Page 34

    Waters network systems user’s manual page 34 gsm-2108/gsm-1008sfp figure 5.8 – virtual stack parameter description: state: used for the activation or de-activation of vsm. Role: the role that the switch would like to play in virtual stack. Two types of roles, including master and slave are offered. ...

  • Page 35

    Waters network systems user’s manual page 35 gsm-2108/gsm-1008sfp 5.8 port configuration port configuration includes the following functions: 5.8.1 port status the port status function gathers the current status for all ports. The information is displayed by the order of port number, link status, po...

  • Page 36

    Waters network systems user’s manual page 36 gsm-2108/gsm-1008sfp displays the port number. The number is 1 – 8. Ports 7 and 8 may be fiber modules. Media: shows the media type used in all ports. Port 7 and port 8 are dual media ports, which support either fiber or utp media with either gigabit ethe...

  • Page 37

    Waters network systems user’s manual page 37 gsm-2108/gsm-1008sfp displays the speed and duplex mode of all ports. There are three speeds 10mbps, 100mbps and 1000mbps supported for tp media. Duplex mode is half duplex and full duplex. If the media is 1gbps fiber, it is 1000mbps only. The status of s...

  • Page 38

    Waters network systems user’s manual page 38 gsm-2108/gsm-1008sfp vcc: displays the working dc voltage of sfp module. Mon1(bias) ma: displays the bias current of sfp module. Mon2(tx pwr): displays the transmit power of sfp module. Mon3(rx pwr): displays the receiver power of sfp module. 5.8.2 port c...

  • Page 39

    Waters network systems user’s manual page 39 gsm-2108/gsm-1008sfp transmitted and received via this port. When disabled, the port is blocked and no traffic can be transmitted through this port. Port state is configurable by the user. If you set a port’s state to disable , then that port cannot pass ...

  • Page 40

    Waters network systems user’s manual page 40 gsm-2108/gsm-1008sfp function name: simple counter function description: displays the summary counting of each port’s traffic, including tx byte, rx byte, tx packet, rx packet, tx collision and rx error packet. Parameters description: tx byte: total trans...

  • Page 41

    Waters network systems user’s manual page 41 gsm-2108/gsm-1008sfp figure 5.14 – detailed counter function name: detail counter function description: displays the detailed counting number of each port’s traffic. In figure 5.14, the window shows all counter information for one port at a time. Paramete...

  • Page 42

    Waters network systems user’s manual page 42 gsm-2108/gsm-1008sfp tx low priority packets: number of tx packets classified as low priority. Tx broadcast: shows the counting number of the transmitted broadcast packet. Tx multicast: shows the counting number of the transmitted multicast packet. Rx 64 ...

  • Page 43

    Waters network systems user’s manual page 43 gsm-2108/gsm-1008sfp rx fragments: number of short frames ( rx jabber: number of long frames(according to max_length register) with invalid crc. Rx drops: frames dropped due to the lack of receiving buffer. Rx errors: number of the error packets received....

  • Page 44

    Waters network systems user’s manual page 44 gsm-2108/gsm-1008sfp 5.9 mirror configuration function name: mirror configuration function description: mirror configuration is used to monitor the traffic of the network. For example, if port a and port b are monitoring port and monitored port respective...

  • Page 45

    Waters network systems user’s manual page 45 gsm-2108/gsm-1008sfp note: each port on the switch has a 16kb packet buffer. The packet buffer size will be reduced when the bandwidth rate limitation is enabled, which may cause the jumbo frame to not be forwarded. It is recommended to avoid enabling jum...

  • Page 46

    Waters network systems user’s manual page 46 gsm-2108/gsm-1008sfp 5.11 qos (quality of service) configuration the switch provides the following powerful qos functions: per port priority vlan tag priority ip tos classification ip tcp/udp port classification ip diffserve classification click on config...

  • Page 47

    Waters network systems user’s manual page 47 gsm-2108/gsm-1008sfp choose the port (1~8) respectively with priority class on per port priority function. Class: set high priority or low priority for each port respectively. Figure 5.18 – per port priority function name: vlan tag priority function descr...

  • Page 48

    Waters network systems user’s manual page 48 gsm-2108/gsm-1008sfp parameter description: quality of service (qos) vlan tag configuration: used for setting up the qos belongs to vlan operation. Port: set the ports (1~8) respectively to allow the vlan tag qos function to work. Use select all to set al...

  • Page 49

    Waters network systems user’s manual page 49 gsm-2108/gsm-1008sfp port: set the ports (1~8) respectively to allow the tos qos function to work. Use select all to set all the ports at the same time. Bit 0, bit 1, bit 2: according to the arrangement of bit 5 ~ bit 7 in tos field of ip header, eight ty...

  • Page 50

    Waters network systems user’s manual page 50 gsm-2108/gsm-1008sfp ftp and news as the qos of l4 and enter the “advanced mode”, then we can see that special port numbers 80, 280, 443, 25, 110, 20, 21, 69, 119, 2009 have already been configured. You can also modify these port numbers. See figure 5.21....

  • Page 51

    Waters network systems user’s manual page 51 gsm-2108/gsm-1008sfp figure 5.21 - advanced mode figure 5.22 - simple mode simple mode: select simple to return to the screen that all l4 port number will disappear (see figure 5.22). Function name ip diffserv classification function description: in the l...

  • Page 52

    Waters network systems user’s manual page 52 gsm-2108/gsm-1008sfp class: 64 types of traffic. Can set high priority or low priority for each port respectively. Figure 5.23 – ip differentiated services 5.12 snmp configuration any network management system (nms) running the simple network management p...

  • Page 53

    Waters network systems user’s manual page 53 gsm-2108/gsm-1008sfp if they both have the same community name, they can talk each other. Community name is user-definable with a maximum length of 15 characters and is case sensitive. No blank spaces are permitted in the community name string. Any printa...

  • Page 54

    Waters network systems user’s manual page 54 gsm-2108/gsm-1008sfp 5.13 igmp snooping igmp snooping is used to establish the multicast groups to forward multicast packets to member ports. Igmp snooping avoids wasting the bandwidth while ip multicast packets are running over the network. A switch that...

  • Page 55

    Waters network systems user’s manual page 55 gsm-2108/gsm-1008sfp passive: in passive snooping mode, igmp snooping will not periodically poll the hosts in the groups. The switch will send a membership query message to all hosts only when it has received a membership query message from a router. Ip a...

  • Page 56

    Waters network systems user’s manual page 56 gsm-2108/gsm-1008sfp the switch supports a random delay time for dhcp and boot delay for each device. This suppresses the broadcast storm while all devices are booting at the same time. The maximum user-defined delay time is 30 seconds. If dhcp broadcasti...

  • Page 57

    Waters network systems user’s manual page 57 gsm-2108/gsm-1008sfp communicate with those ports. Each port-based vlan must be assigned a group name. This switch can support up to a maximum of 8 port-based vlan groups. Tag-based: tag-based vlan identifies its member by vid. Tag-based vlans are differe...

  • Page 58

    Waters network systems user’s manual page 58 gsm-2108/gsm-1008sfp figure 5.29 – vlan mode 5.16.2 tag-based group function name: tag-based group configuration function description: displays tag-based vlan groups. Use this option to create, edit and delete a tag-based vlan groups. Add a new vlan group...

  • Page 59

    Waters network systems user’s manual page 59 gsm-2108/gsm-1008sfp figure 5.30 – tag-based group add group: create a new tag-based vlan. Input the vlan name and the vid. Configure the sym-vlan function and choose the member by selecting the check box beside the port number. Press apply so the setting...

  • Page 60

    Waters network systems user’s manual page 60 gsm-2108/gsm-1008sfp delete group: press delete to remove the selected group entry from the tag-based group table. Figure 5.32 – tag-based group edit a group: select a group entry and select edit. This allows you to modify the group’s description, sym- vl...

  • Page 61

    Waters network systems user’s manual page 61 gsm-2108/gsm-1008sfp parameter description: vlan name: valid letters are a-z, a-z, 0-9, “ - “ and “_” characters. The maximum, length is 15 characters. Member: used to enable or disable a member port. Enable means the port is a member of the vlan. Select ...

  • Page 62

    Waters network systems user’s manual page 62 gsm-2108/gsm-1008sfp figure 5.35 – port-based group edit a group: to edit a group entry, use edit . This allows you to modify a group‘s description and member set. 5.16.4 tag rule function name: tag rule function description: with the vlan tag rule settin...

  • Page 63

    Waters network systems user’s manual page 63 gsm-2108/gsm-1008sfp packet with vid=100 (vlan name=vlan100), and if rule 1 is enabled, the switch will check if port 1 is a member of vlan100. If it is, the received packet is forwarded; otherwise, the received packet is dropped. Rule 2: drop untagged fr...

  • Page 64

    Waters network systems user’s manual page 64 gsm-2108/gsm-1008sfp displays the static or dynamic learning mac entry and the state for the selected port. Parameter description: port: select the port. Search: set up the mac entry. The default is ??-??-??-??-??-?? Mac: displays the mac address of the e...

  • Page 65

    Waters network systems user’s manual page 65 gsm-2108/gsm-1008sfp figure 5.37 – mac table information function name: mac table maintenance function description: this function allows the user to set up the processing mechanism of the mac table. An idle mac address exceeding mac address age-out time w...

  • Page 66

    Waters network systems user’s manual page 66 gsm-2108/gsm-1008sfp function name: static forward function description: static forward is a function that allows the user in the static forward table to access a specified port of the switch. The static forward table associated with a specified port of a...

  • Page 67

    Waters network systems user’s manual page 67 gsm-2108/gsm-1008sfp function name: static filter function description: static filter is a function that denies the packet forwarding if the packet’s mac address is listed in the filtering static filter table. Maintain the table by filling in mac address,...

  • Page 68

    Waters network systems user’s manual page 68 gsm-2108/gsm-1008sfp function name: mac alias create/edit or delete function description: in the mac alias function, mac alias add/edit function is used to let you add or modify an association between mac address and an english name. Select create/edit to...

  • Page 69

    Waters network systems user’s manual page 69 gsm-2108/gsm-1008sfp 5.18 gvrp configuration gvrp is an application based on the generic attribute registration protocol (garp), mainly used to automatically and dynamically maintain the group membership information of the vlans. Gvrp provides the vlan re...

  • Page 70

    Waters network systems user’s manual page 70 gsm-2108/gsm-1008sfp used to declare the join time in unit of centisecond. Valid time range: 20 –100 centisecond, default: 20 centisecond. Leave time: used to declare the leave time in unit of centisecond. Valid time range: 60 –300 centisecond, default: 6...

  • Page 71

    Waters network systems user’s manual page 71 gsm-2108/gsm-1008sfp function name: gvrp counter function description: gvrp counters are divided into received and transmitted categories which allows you monitor the gvrp actions. They are garp packets. Figure 5.43 – gvrp counter parameter description: r...

  • Page 72

    Waters network systems user’s manual page 72 gsm-2108/gsm-1008sfp total garp bpdu transmitted by the gvrp application. Invalid gvrp packets: number of invalid garp bpdu transmitted by the gvrp application. Leaveall message packets: number of garp bpdu with leave all message transmitted by the garp a...

  • Page 73

    Waters network systems user’s manual page 73 gsm-2108/gsm-1008sfp figure 5.44 – gvrp vlan 5.19 spanning tree configuration (stp) configuration the spanning tree protocol (stp) is a standardized method (ieee 802.1d) used to avoid loops in switched networks. When stp is enabled, only one path is activ...

  • Page 74

    Waters network systems user’s manual page 74 gsm-2108/gsm-1008sfp displays port number connected to root bridge with the lowest path cost. Root path cost: displays the path cost between the root port and the designated port of the root bridge. Current max. Age: displays the current root bridge maxim...

  • Page 75

    Waters network systems user’s manual page 75 gsm-2108/gsm-1008sfp 5.19.2 stp configuration stp includes rapid spanning tree protocol (rstp). Stp has six parameters to be configured. These parameters are described below. Function name: stp configuration function description: set the following spannin...

  • Page 76

    Waters network systems user’s manual page 76 gsm-2108/gsm-1008sfp figure 5.46 – stp configuration 5.19.3 stp port configuration function name: stp port setting function description: in the stp port setting, one item selection and five parameters are available for setup. You can disable and enable ea...

  • Page 77

    Waters network systems user’s manual page 77 gsm-2108/gsm-1008sfp configured path cost: the range is 0 – 200,000,000. If the path cost is set to zero, the stp will get the recommended value resulted from auto-negotiation of the link accordingly and display this value in the field of path cost status...

  • Page 78

    Waters network systems user’s manual page 78 gsm-2108/gsm-1008sfp figure 5.47 – stp port configuration 5.20 trunking configuration the port trunking configuration is used to configure the settings of link aggregation. More than one port can be bundled with the same speed, full duplex and the same ma...

  • Page 79

    Waters network systems user’s manual page 79 gsm-2108/gsm-1008sfp the switch supports a maximum of eight trunk groups for lacp and additional eight trunk groups for static trunk. In the system capability view, only eight “real trunked” groups are supported. An lacp trunk group with more than one rea...

  • Page 80

    Waters network systems user’s manual page 80 gsm-2108/gsm-1008sfp an active lacp port begins to send lacpdu to its link partner as soon as the lacp protocol entity takes control of this port. Passive: a passive lacp port will not actively send lacpdu out until it receives an lacpdu from its link par...

  • Page 81

    Waters network systems user’s manual page 81 gsm-2108/gsm-1008sfp member ports: displays all member ports of an aggregator (port). Ready ports: displays only the ready member ports within an aggregator (port). Figure 5.49 – aggregator view function name: lacp detail (lacp aggregator detailed informa...

  • Page 82

    Waters network systems user’s manual page 82 gsm-2108/gsm-1008sfp trunk status: displays the trunk status of a single member port.”---“ means “not ready” figure 5.50 – aggregator information function name: lacp system priority function description: used to set the priority of the lacp system id. Lac...

  • Page 83

    Waters network systems user’s manual page 83 gsm-2108/gsm-1008sfp 5.21 802.1x configuration 802.1x port-based network access control provides a method to restrict users to access network resources via authenticating user’s information. This restricts users from gaining access to the network resource...

  • Page 84

    Waters network systems user’s manual page 84 gsm-2108/gsm-1008sfp the authenticator to perform authentication message exchange or access the network from the uncontrolled port. Figure 5.52 figure 5.53 represents a typical configuration; a single supplicant, an authenticator and an authentication ser...

  • Page 85

    Waters network systems user’s manual page 85 gsm-2108/gsm-1008sfp figure 5.54 illustrates the procedure of 802.1x authentication. There are steps for the login based on 802.1x port access control management. The protocol used in the right side is eapol and the left side is eap. 1. At the initial sta...

  • Page 86

    Waters network systems user’s manual page 86 gsm-2108/gsm-1008sfp figure 5.54 the type of authentication supported in the switch is multihost 802.1x. In this mode, once a supplicant is authorized, the devices connected to this port can access the network resources. 802.1x port-based network access c...

  • Page 87

    Waters network systems user’s manual page 87 gsm-2108/gsm-1008sfp function name: 802.1x state setting function description: this function is used to configure the global parameters for radius authentication in 802.1x port security application. Parameter description: radius server: radius server ip a...

  • Page 88

    Waters network systems user’s manual page 88 gsm-2108/gsm-1008sfp 802.1x mode: 802.1x operation mode. There are two options, including disable and multihost mode. Default is disable. Disable the chosen port acts as a plain port, which means 802.1x port access control does not work on the port. 802.1...

  • Page 89

    Waters network systems user’s manual page 89 gsm-2108/gsm-1008sfp select 802.1x with multihost mode for a port. With the function 802.1x port mode configuration, devices can access the network through this port once the authenticator is authorized. The port status will display the following screen. ...

  • Page 90

    Waters network systems user’s manual page 90 gsm-2108/gsm-1008sfp txperiod (1-65535 s): a time period to transmitted eapol pdu between the authenticator and the supplicant. Default: 30 quiet period (0-65535 s): a period of time during in which access the supplicant will not be attempted. Default: 60...

  • Page 91

    Waters network systems user’s manual page 91 gsm-2108/gsm-1008sfp 5.22 alarm configuration function name: events configuration function description: the trap events configuration function is used to enable the switch to send out trap information while pre-defined trap events occur. The switch provid...

  • Page 92

    Waters network systems user’s manual page 92 gsm-2108/gsm-1008sfp function name: email/sms configuration function description: alarm configuration is used to configure the recipients of the alarm message via email or sms, or both. The method is dependent on the settings. An email address or a mobile...

  • Page 93

    Waters network systems user’s manual page 93 gsm-2108/gsm-1008sfp 5.23 configuration the switch supports three copies of configurations, including the default configuration, working configuration and user configuration for your configuration management. The three copies are described below: note : i...

  • Page 94

    Waters network systems user’s manual page 94 gsm-2108/gsm-1008sfp 5.23.1 save/restore function name: save as start configuration function description: save the current configuration as a start configuration file in flash memory. Figure 5.62 - configuration function name: save as user configuration f...

  • Page 95

    Waters network systems user’s manual page 95 gsm-2108/gsm-1008sfp 5.23.2 restore default function name: restore default configuration (includes default ip address) function description: restore default configuration function can retrieve the factory setting to replace the start configuration. If the...

  • Page 96

    Waters network systems user’s manual page 96 gsm-2108/gsm-1008sfp function name: restore user configuration function description: restore user configuration function retrieves the previous confirmed working configuration stored in the flash memory to update start configuration. When restoring the co...

  • Page 97

    Waters network systems user’s manual page 97 gsm-2108/gsm-1008sfp figure 5.67 – configuration import/export 5.24 diagnostics three functions, including diagnostics, loopback test and ping test are available for device self-diagnostics. Each of them will be described in detail in the following sectio...

  • Page 98

    Waters network systems user’s manual page 98 gsm-2108/gsm-1008sfp figure 5.68 - diagnostics function name: loopback test function description: in the loopback test function, there are two loopback tests -- internal loopback test and external loopback test. The former test function will not send the ...

  • Page 99

    Waters network systems user’s manual page 99 gsm-2108/gsm-1008sfp ping test function is a tool for detecting whether or not the target device is making a connection through the icmp protocol which submits report messages. The switch provides ping test function to let you know whether the target devi...

  • Page 100

    Waters network systems user’s manual page 100 gsm-2108/gsm-1008sfp figure 5.71 – tftp server 5.26 log data this function displays the log data. The switch provides system log data for users. There are nineteen private trap logs and five public trap logs. The switch supports a total 120 log entries. ...

  • Page 101

    Waters network systems user’s manual page 101 gsm-2108/gsm-1008sfp parameter description: no.: displays the order number of the traps. Time: displays the time of the trap. Events: displays the trap event name. Auto upload enable: switch the enabled or disabled status of the auto upload function. Upl...

  • Page 102

    Waters network systems user’s manual page 102 gsm-2108/gsm-1008sfp figure 5.73 – firmware upgrade 5.28 reboot there are a few ways to reboot the switch, including power up, hardware reset and software reset. You can press the reset button in the front panel to reset the switch. After upgrading softw...

  • Page 103

    Waters network systems user’s manual page 103 gsm-2108/gsm-1008sfp 5.29 logout you can manually logout by using logout function. You can also configure the switch to logout automatically. Function name: logout function description: the switch provides and automatic logout to prevent unauthorized use...

  • Page 104

    Waters network systems user’s manual page 104 gsm-2108/gsm-1008sfp 6.0 operation of cli management section 4 of this manual provides detailed information for console connection to the switch. This section provides detailed syntax and examples for cli management. 6.1 login the command-line interface ...

  • Page 105

    Waters network systems user’s manual page 105 gsm-2108/gsm-1008sfp 6.2 commands of cli to see the commands of the mode, please input “ ? ” after the prompt, then all commands will be listed in the screen. All commands can be divided into two categories, including global commands and local commands. ...

  • Page 106

    Waters network systems user’s manual page 106 gsm-2108/gsm-1008sfp command syntax description argument possible value when you use help , all commands are displayed. This command will help you distinguish between local and global commands. History history displays the list of commands you have been ...

  • Page 107

    Waters network systems user’s manual page 107 gsm-2108/gsm-1008sfp command syntax description argument possible value current configuration into the non-volatile flash as the user- defined configuration. Local commands 802.1x set max- request set max- request range> this command sets the number of t...

  • Page 108

    Waters network systems user’s manual page 108 gsm-2108/gsm-1008sfp command syntax description argument possible value set servertimeout set servertimeout this command sets a timer used by the backend authentication state machine to determine timeout conditions in the exchanges between the authentica...

  • Page 109

    Waters network systems user’s manual page 109 gsm-2108/gsm-1008sfp command syntax description argument possible value del del used to delete an existing account : existing user account none modify modify used to modify the username and password of an existing account : existing user account none sho...

  • Page 110

    Waters network systems user’s manual page 110 gsm-2108/gsm-1008sfp command syntax description argument possible value show show used to display the configuration of an alarm event none none show (alarm) show alarm is used to display the configuration of trap, sms or email none none > del phone- numb...

  • Page 111

    Waters network systems user’s manual page 111 gsm-2108/gsm-1008sfp command syntax description argument possible value settings for bandwidth config-file export start export start used to run the export start function none none export user- conf export-user conf used to export user-conf function none...

  • Page 112

    Waters network systems user’s manual page 112 gsm-2108/gsm-1008sfp command syntax description argument possible value registrar mode of an existing gvrp group per port can be changed. Group you have created using the vid. Available range 1 to 4094 1~4094 set applicant set applicant participant> used...

  • Page 113

    Waters network systems user’s manual page 113 gsm-2108/gsm-1008sfp command syntax description argument possible value hostname hostname hostname used to set the hostname of the switch :hostname, max 40 characters :hostna me, max 40 characters igmp set igmp_ snooping set igmp_snooping use to set the ...

  • Page 114

    Waters network systems user’s manual page 114 gsm-2108/gsm-1008sfp command syntax description argument possible value 05-06 mac alias name, max 15 characters show show used to display the mac alias entry none none > search search used to find the relative mac information in the mac table : set up th...

  • Page 115

    Waters network systems user’s manual page 115 gsm-2108/gsm-1008sfp command syntax description argument possible value not tag-based show filter show filter used to display the static filter table none none show forward show forward used to display the static forward table none none management add se...

  • Page 116

    Waters network systems user’s manual page 116 gsm-2108/gsm-1008sfp command syntax description argument possible value must be set show show used to show the specific management policy record none none max-pkt-len set len set len used to set the maximum length of the packet that each port of the swit...

  • Page 118

    Waters network systems user’s manual page 118 gsm-2108/gsm-1008sfp command syntax description argument possible value available from 0 to 63 : class of service setting. 1:high, 0:low : 1 or 0 set mode set mode s/layer4/diffserv > used to set qos priority mode of the switch : per port priority :vlan ...

  • Page 119

    Waters network systems user’s manual page 119 gsm-2108/gsm-1008sfp command syntax description argument possible value : tos precedence field, syntax 1, 5-7, available from 0 to 7 : classof service setting. 1:high, 0:low to 7 : 1 or 0 show show used to display the information of the mode you have cho...

  • Page 120

    Waters network systems user’s manual page 120 gsm-2108/gsm-1008sfp command syntax description argument possible value time +1) set port set port cost> used to set up the port information of stp : syntax 1, 5- 7, available from 1 to 8 : 0, 1- 200000000. The value zero means auto status : priority mus...

  • Page 121

    Waters network systems user’s manual page 121 gsm-2108/gsm-1008sfp command syntax description argument possible value start hour (01-23) mm: daylight saving end month (01-12) dd: daylight saving end day (01-31) hh: daylight saving end hour (00-23) hh: (00-23) set manual set manual > used to set the ...

  • Page 122

    Waters network systems user’s manual page 122 gsm-2108/gsm-1008sfp command syntax description argument possible value detail detail information of the lacp trunk group available from 1 to 8 show lacp- priority show lacp- priority used to display the value of lacp priority none none show status show ...

  • Page 123

    Waters network systems user’s manual page 123 gsm-2108/gsm-1008sfp command syntax description argument possible value frames except a specific vid : untag-vid for hybrid port set pvid set pvid used to set the pvid of the vlan ports to be set pvid(s), 1, 5-7, available from 1 to 8 ; pvids to be set, ...

  • Page 124

    Waters network systems user’s manual page 124 gsm-2108/gsm-1008sfp 7.0 maintenance the possible causes for a no link led status are as follows: the attached device is not powered on the cable may not be the correct type or is faulty the installed building premise cable is faulty the port may be faul...

  • Page 125

    Waters network systems user’s manual page 125 gsm-2108/gsm-1008sfp 8.0 troubleshooting all waters’ switching products are designed to provide reliability and consistently high performance in all network environments. The installation of waters’ proswitch gsm switch is a straightforward procedure. Sh...

  • Page 126

    Waters network systems user’s manual page 126 gsm-2108/gsm-1008sfp that you purchased the products from your supplier. 3. It is useful to include other network equipment models and related hardware, including personal computers, workstations, terminals and printers; plus, the various network media t...

  • Page 127

    Waters network systems user’s manual page 127 gsm-2108/gsm-1008sfp waters network systems attention: customer service 945 37 th avenue, nw rochester, mn 55901.

  • Page 128

    Waters network systems user’s manual page 128 gsm-2108/gsm-1008sfp 9.0 warranty waters network systems’ warranty statement waters network systems’ products are warranted against defects in materials and workmanship. The warranty period for each product will be provided upon request at the time of pu...