Operation manual intended for professionals and end users. To be saved for future consultation fujitsu general (euro) gmbh werftstrasse 20 40549 düsseldorf - germany subject to modifications without notice. Non contractual document. Wsyp100dg6 heat pump air/water split system hydraulic indoor unit f...
Contents instructions to be read before using the equipment 3 safety instructions 3 start-up 3 use 3 maintenance 3 precautions and warnings regarding your installation 4 the outdoor unit 4 the hydraulic unit 4 control system 4 the radiators 4 floor-heating systems 4 fan convectors / dynamic radiator...
1 instructions to be read before using the equipment please comply with the following instructions in order to avoid any risk of injury or inappropriate use of the appliance 1 1 safety instructions 1 1 1 start-up " do not switch the appliance on until every fillings have been done. " do not try to i...
1 2 precautions and warnings regarding your installation 1 2 1 the outdoor unit the outdoor unit contains the equipment for capturing energy from the ambient air your installer has placed this unit in a location that enables it to operate in an optimum manner nothing should obstruct the air circulat...
2 overall view of the installation your heat pump has been configured by your installer. It is composed of the following main elements: -the outdoor unit is positioned, as its name indicates, outside your dwelling and extracts energy from the outside air -the hydraulic unit positioned in your boiler...
3 operation of the installation 3 1 user interface, room control unit (option) and room thermostat (option) figure 2 - °c auto auto esc ok 0 4 8 12 16 20 24 1 2 3 4 5 6 7 8 11 5 2 10 11 room control unit t75 / t78 room thermostat t55 / t58 1 2 3 4 5 6 7 8 9 user interface operation manual "1780 - en...
Ref functions - definitions 1 selecting of the dhw operating mode (domestic hot water) on off if the installation is fitted with a dhw tank. -on: production of dhw according to the time program -off: preparing the domestic hot water for stopping with the anti-frost function active -manual start butt...
Figure 3 - 3 2 description of the display symbols definitions -heating mode active with reference to the heating circuit -heating in comfort mode -heating in reduced mode -heating in "standby" mode (freeze protection) -cooling mode active -holiday mode activated -process in progress -compressor oper...
3 3 appliance start up • the installation and 1st start up of the appliance must be done by a qualified installer. That person will also give you instructions on starting and running the appliance • ensure that the installation is fully filled with water and has been correctly bled and that there is...
3 5 setting the time figure 8 - 0 4 8 12 16 20 24 auto 2 0 4 8 12 16 20 24 auto 3 0 4 8 12 16 20 24 auto 4 0 4 8 12 16 20 24 auto 1 5 0 4 8 12 16 20 24 auto 6 0 4 8 12 16 20 24 auto keys display example description basic display if the basic display is not shown, press esc to return to it press ok t...
3 6 structure of the "end user" control menu 1 2 3 20 500 501 502 503 504 505 506 515 516 641 642 643 648 710 712 714 6711 7141 8410 8412 8413 8700 8701 8702 ... 8900 65 °c 1610 1 ...24 h 0...60 min 28 °c 4 °c... ... English, german... Basic display brief press end user commissioning engineer oem ti...
3 7 parametering the setting 3 7 1 general only the parameters accessible to levels: end user are described in this document the parameters accessible at level: commissioning engineer … are described in the document reserved for these professional specialists do not make any modifications to these p...
Line function setting range or display setting range or display basic setting heating / cooling time program, circuit 1 500 pre-selection (day / week) mon-sun, mon-fri, sat-sun, monday, tuesday, … mon-sun 501 1st phase on (start) 00:00 --:-- 10 min 6:00 502 1st phase off (end) 00:00 --:-- 10 min 22:...
Line function setting range or display setting range or display basic setting dhw setting (domestic hot water) if the installation is fitted with the dhw kit. 1610 comfort setting reduced setting (line 1612)… 65 °c 1 55 °c the backup electrical system is required to reach this level 1612 reduced set...
Line function setting range or display setting range or display basic setting 3161 not used -- 3163 heat delivered heating 7 -- 3164 heat delivered dhw 7 -- 3165 cooling delivered cooling 7 -- 3166 not used -- 3167 not used -- 3168 not used -- 3170 heat delivered heating 8 -- 3171 heat delivered dhw...
-various data (see below) designation line floor drying current setpoint - current drying day - terminated drying days - state heat pump 8006 state dhw 8003 state heating circuit 1 8000 state cooling circuit 1 8004 outdoor temperature 8700 room temperature 1 8740 room setpoint 1 flow temperature 1 8...
3 10 operation of the dhw system the key enables you to switch the dhw (domestic hot water) mode on and off the selection is shown by a bar, which appears under the corresponding symbol manual activation: hold down the dhw key for 3 seconds (switch from "reduced" to "nominal" until the next time the...
4 maintenance in order to insure your appliance operates correctly for many years, the maintenance operations described below are required at the start of each heating season generally, these are performed as part of a service contract 4 1 regular checks -periodically check the water pressure in the...
Operation manual "1780 - en" - 19 - hydraulic indoor unit.
Date of installation : contact of your heating technician or your after-sales service. This appliance is marked with this symbol this means that electrical and electronic products shall not be mixed with general household waste european community countries(*), norway, iceland and liechtenstein shoul...
