- DL manuals
- Watkins
- Hot Tub
- Grandee
- Owner's Manual
Watkins Grandee Owner's Manual
Summary of Grandee
Page 1
Owner’s manual owner’s manual.
Page 2: Owner’S Manual
Owner’s manual t his owner’s manual will acquaint you with the operation and general maintenance of your new spa. We suggest that you take some time to carefully review all seven sections. Please keep this manual available for reference. If you have any questions about any aspect of your spa’s set-u...
Page 3: Table of Contents
Table of contents table of contents safety information ............................................1 important spa instructions............................................................3 spa specifications ................................................4 controls and equipment ......................
Page 4: Safety Information
Page 1 safety information safety information important safety instructions read and follow all instructions avoiding the risk to children danger: • risk of child drowning. Extreme caution must be exercised to prevent unauthorized access by children. To avoid accidents, ensure that children cannot us...
Page 5
Page 2 • your spa uses ground fault circuit interrupters in the electrical subpanel. Before each use of the spa and with the unit operating, push the test button on each breaker. The switch should click over to the “trip” position. Wait 30 seconds and reset each gfci breaker by switching it complete...
Page 6: Important Spa Instructions
Page 3 safety information avoiding the risk of hyperthermia prolonged immersion in hot water can result in hyperthermia, a dangerous condition which occurs when the internal temperature of the body reaches a level above normal (98.6°f). The symptoms of hyperthermia include unawareness of impending h...
Page 7: Spa Specifications
Page 4 7'3" x 7'3" 2.20m x 2.20m 6'8" x 7'9" 2.03m x 2.36m 6'2" x 7'3" 1.88m x 2.21m 5'2" x 6'10" 1.57m x 2.08m grandee ® (model g) 7'7" x 8'4" 2.31m x 2.54m 38" .96 m 150 square feet 6,000 500 gallons 1,893 litres 877 lbs. 398 kg. 6,167 lbs. 2,797 kg. 115 lbs. Per square foot 230 volt, 50 amp singl...
Page 8: Landmark
Page 5 controls and equipment landmark ® model s 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment com...
Page 9: Overhead View
Page 6 overhead view a. Smartjet ® system lever b. Moto-massage ® jet comfort control ® system lever c. Precision ® jets comfort control system lever d. Jetstream ® jet comfort control system lever e. Pillow f. Hydromassage jet with directional nozzle g. Hydromassage jet with rotary nozzle h. Moto-m...
Page 10: Vanguard
Page 7 vanguard ™ model v 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment compartment overhead view ...
Page 11: Sovereign
Page 8 sovereign ® limited edition model ile 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment compart...
Page 12: Sovereign
Page 9 controls and equipment sovereign ® model i 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment co...
Page 13: Prodigy
Page 10 prodigy ® model h 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment compartment overhead view ...
Page 14: Jetsetter
Page 11 jetsetter ® model j 1. Wavemaster ® jet pump 2. No-fault ® 6000 heater 3. Silent flo 5000 ® circulation pump 4. Iq 2020 ™ control box 5. Ozone injector (optional accessory) 6. Main drain valve 7. Secondary drain 8. Heater thermal cut-off 9. Bonding terminal equipment compartment overhead vie...
Page 15: Installation Instructions
Page 12 installation instructions site preparation y ou probably have a spot picked out for your new spa, whether it’s indoors or outdoors, on a patio or on a deck. Just make sure you check the following: • always put your spa on a structurally sound, level surface. A filled spa can weigh a great de...
Page 16: Spa Leveling Instructions
Page 13 spa leveling instructions spa leveling instructions i n order for your hot spring ® spa to operate properly, and the internal plumbing to drain completely, the spa must be level. If the spa is to be installed on an uneven, or unlevel foundation, shimming of the spa is required. Note: due to ...
Page 17: Vanguard
Page 14 vanguard ™ (model v) leveling points note: all dimensions are approximate; measure your spa before making critical design or pathway decisions. • 15 leveling points (place shims approx. 18” in from edge, then center middle shims). Upside down view of spa spa leveling instructions.
Page 18: Sovereign
Page 15 spa leveling instructions sovereign ® (model i & ile) leveling points note: all dimensions are approximate; measure your spa before making critical design or pathway decisions. • 15 leveling points (place shims approx. 18” in from edge, then center middle shims)..
Page 19: Prodigy
Page 16 prodigy ® (model h) leveling points note: all dimensions are approximate; measure your spa before making critical design or pathway decisions. Spa leveling instructions • 10 leveling points (place shims approx. 15” in from edge, then center middle shims)..
Page 20: Jetsetter
Page 17 jetsetter ® (model j) leveling points note: all dimensions are approximate; measure your spa before making critical design or pathway decisions. Spa leveling instructions • 10 leveling points (place shims approx. 15” in from edge, then center middle shims)..
Page 21: Electrical Requirements and
Page 18 electrical requirements and precautions y our hot spring ® spa has been carefully designed to give you maximum safety against electrical shock. Connecting the spa to an improperly wired circuit will negate many of the spa’s safety features. Improper wiring may also cause electrocution, risk ...
Page 22
Page 19 electrical requirements 1. Push the “test” button on each gfci breaker, and observe it click off. 2. Wait 30 seconds, then push the breaker switch to the off (down) position (to ensure that it has completely disengaged), then push the breaker switch to the on (up) position. If you don’t wait...
Page 23
Electrical requirements 115-230 volt convertible models • sovereign ® (model i) • prodigy ® (model h) • jetsetter ® (model j) 230 volt conversion instructions refer to the following instructions to convert a 115 volt spa to a 230 volt spa. Note: converting the spa to 230 volt operation should only b...
Page 24
Page 21 4. Connect the #10 awg, blue wire from the subpanel 30 amp breaker, terminal l1 to tb-1, terminal 1. 5. Connect the #10 awg, red wire from the subpanel 30 amp breaker, terminal l2 to tb-1, terminal 3. 6. Connect the #10 awg, green wire from the subpanel ground bar to tb-1 system ground termi...
Page 25
Page 22 electrical requirements for 115 volt operation the spa must be connected to a dedicated 115 volt, 20 amp, gfci protected, grounded circuit. The term “dedicated” means the electrical circuit is not being used or shared for any other electrical items (patio lights, appliances, garage circuits,...
Page 26: Operating Instructions
Page 23 operating instructions operating instructions h ot spring ® spas are manufactured in two different electrical versions, 230 volt permanently connected, and 115 / 230 volt convertible models. The largest spa models, the landmark ® , grandee ® , vanguard ™ , and sovereign ® limited edition are...
Page 27
Page 24 start-up and refill procedures your hot spring ® spa has been thoroughly tested during the manufacturing process to ensure reliability and long-term customer satisfaction. A small amount of water may have remained in the plumbing after testing and, as a result, may have spotted the spa shell...
Page 28: Smartjet
Page 25 10. Recheck the total alkalinity (ta) at 125 ppm, calcium hardness (ch) at 150 ppm, then spa water ph at between 7.4 and 7.6. Operational note: make sure you adjust your total alkalinity first, as an out-of-balance condition will affect your ability to adjust the ph correctly, and will preve...
Page 29
Page 26 soothing seven ® jet the soothing seven ® jet is another unique feature of hot spring spas. Its seven outlets are designed to massage the muscles in the upper back and shoulders, gently and thoroughly. Turn the faceplate clockwise to increase the jet pressure and counterclockwise to decrease...
Page 30: Landmark
Page 27 jet menus landmark ® (model s) jet system menu landmark ® (model s) jet system menu left jet pump–jet system 1 left smartjet ® lever in the 3 o’clock position • 1 directional hydromassage jet on left wall • 2 soothing seven ® jets on left wall • 1 moto-massage ® jet on right front • 4 precis...
Page 31: Grandee
Page 28 left jet pump–jet system 1 left smartjet ® lever in the 3 o’clock position • 1 moto-massage ® jet on left rear • 4 precision ® jets above left moto-massage ® jet • 3 jet-cluster ™ system on left wall (1 directional hydromassage, 2 soothing seven ® ) • 2 dual port rotary jets on back wall lef...
Page 32: Vanguard
Page 29 vanguard ™ (model v) jet system menu vanguard ™ (model v) jet system menu jet system 1 smartjet ® lever in the 3 o’clock position • 1 moto-massage ® jet on left rear • 4 precision ® jets above left moto-massage ® jet • 1 moto-massage ® jet on right rear • 4 precision ® jets above right moto-...
Page 33: Sovereign
Page 30 sovereign ® limited edition (model ile) jet system menu sovereign ® limited edition (model ile) jet system menu jet system 2 smartjet ® lever in the 9 o’clock position • 1 moto-massage ® jet on right rear • 4 precision ® jets above moto-massage ® jet • 2 jetstream ® jets in footwell ® system...
Page 34: Sovereign
Page 31 sovereign ® (model i) jet system menu sovereign ® (model i) jet system menu jet system 1 smartjet ® lever in the 3 o’clock position • 1 moto-massage ® jet on left rear • 1 directional hydromassage jet on back wall • 10 precision ® jets on right rear • 2 soothing seven ® jets on right wall • ...
Page 35: Prodigy
Page 32 jet system 1 smartjet ® lever in the 3 o’clock position • 10 precision ® jets on right rear • 2 dual port rotary jets on left rear • 1 directional hydromassage jet on left wall • 2 soothing seven ® jets on front left jet system 2 smartjet ® lever in the 9 o’clock position • 1 jetstream ® jet...
Page 36: Jetsetter
Page 33 jet system 1 smartjet ® lever in the 3 o’clock position • 1 moto-massage ® jet on left rear • 3 jet-cluster ™ system on front right (2 soothing seven ® jets, 1 directional hydromassage jet) • 1 directional hydromassage jet on back wall jet system 2 smartjet ® lever in the 9 o’clock position ...
Page 37: Control Panels
Page 34 control panels hot spring ® spa models are equipped with a main control panel, located on the side of the spa, and an auxiliary control panel (except jetsetter ® ) located within the seating area of the spa. The main control panel controls all of the spa functions, and uses indicator lights ...
Page 38
Page 35 control panel operations to activate the temperature lock, press the light plus (+) and temp plus (+) buttons at the same time and hold them down until the words set temp, the numerical set temperature value and the lock symbol are illuminated on the display (approximately two seconds). When...
Page 39: Water Care
Page 36 light control the intensity of the spa’s light is controlled using the light plus (+) or light minus (-) buttons. To turn on the spa light, press the light plus (+) button. The light will turn on at maximum intensity and the light symbol will illuminate on the control panel display. To reduc...
Page 40: 115 Volt Gfci
Page 37 light control see main control panel’s light control section. 115 volt gfci the ground fault circuit interrupter is a safety device that is designed to detect as little as 5 milliamps (±1ma) of electrical current leakage to ground. Watkins manufacturing corporation recommends that the gfci b...
Page 41: Spa Care and Maintenance
Page 38 spa care and maintenance general information y our hot spring ® spa is manufactured from the highest quality, most durable materials available. Even so, the spa care and maintenance program you develop will ultimately determine how long your spa, and its individual components, will last. Reg...
Page 42: Care of The Spa Pillows
Page 39 spa care and maintenance filter cartridges removal & cleaning 1. Disconnect the spa from the power supply by the appropriate method: 115 volt models: disconnect the power cord from the house receptacle. Set the power cord in an elevated position so as not to allow water to enter the gfci plu...
Page 43: Care of The Spa Cover
Page 40 everwood ® spa cabinet hot spring ® spas include an everwood spa cabinet. Everwood consists of a rigid polymer that combines the durability of plastic with the beauty of redwood. Everwood won’t crack, peel, blister or delaminate even after prolonged exposure to the elements. Cleaning of ever...
Page 44: Vacation Care Instructions
Page 41 spa care and maintenance water) and place the other along the side of the cover, just above the skirt. Gently push (do not lift) with both hands towards the opposite rear corner of the cover (diagonally). As the cover opens, the gas springs will allow the cover to come to a gentle stop. B. F...
Page 45: Prevention of Freezing
Page 42 prevention of freezing your hot spring ® spa has been designed and engineered for year-round use in any climate. In some areas, extremely cold temperatures (below 10°f) combined with strong wind, may cause partial freezing of the jet pump, even though the water inside the spa remains at the ...
Page 46: General Information
Page 43 water quality and maintenance c) place the shop vac hose over the secondary “freeze” drain outlet and allow it to draw any remaining water from the spa’s bleedlines (approximately 3 to 5 minutes). 9. Thoroughly dry the spa shell with a clean towel. 10. Leave the main drain valve open approxi...
Page 47: The Hot Spring
Page 44 • accurately measure the exact quantities specified, never more. Do not overdose your spa. • handle all containers with care. Store in a cool, dry, well ventilated place. • always keep chemical containers closed when not in use. Replace caps on their proper containers. • don’t inhale fumes, ...
Page 48
Page 45 balancing the calcium hardness (ch) a. The recommended calcium hardness (ch) level for your spa is 150-200 ppm. B. Calcium hardness is a measure of the total amount of dissolved calcium in the water. Calcium helps control the corrosive nature of the spa’s water. That’s why calcium-low water ...
Page 49: Everfresh
Page 46 maintaining the sanitizer level a. Sanitizer is extremely important for killing algae, bacteria and viruses, and preventing unwanted organisms from growing in the spa. At the same time, you don’t want too high a sanitizer level, or it can irritate your skin, lungs, and eyes. B. Always mainta...
Page 50
Page 47 a weekly “shock treatment” is required. The shock treatment quickly destroys any remaining contaminants while revitalizing the silver ion cartridge, allowing the silver ions to continue to be released into the water. Without this weekly shock treatment, the silver ion cartridge may stop rele...
Page 51: Freshwater
Page 48 freshwater ag+ ® silver ion purifier replacement instructions when replacing the freshwater ag+ silver ion purifier (every four months), it is highly recommended that the spa be drained and refilled at the same time. After refilling the spa with water, balance the total alkalinity (ta), calc...
Page 52: Chlorine (Sodium Dichlor)
Page 49 chlorine (sodium dichlor) a. Sanitizing chemicals, such as chlorine, are oxidants that kill bacteria and viruses in the water. The free available chlorine (fac) is a measure of the amount of unused chlorine available to sanitize the spa. The recommended fac for your spa water is 3.0-5.0 ppm....
Page 53: Ozone
Page 50 note: well water may contain high concentrations of minerals. The use of a low water volume, extra-fine pore water filter (in-line pre-filter such as the freshstart ® 10,000 pre-filter) will help to remove many of the larger particles during the filling of the spa. In-line pre-filters can be...
Page 54
Page 51 8. Run the spa until all 16 ounces of the vinegar are gone. This should allow an ample flow of vinegar to be run through the injector and clear the blockage. 9. Disconnect power to the spa. 10. Remove the empty cup or bucket. 11. Reinstall the tubing to the bottom of the ozonator. 12. Plug t...
Page 55: Water Terminology
Page 52 answer: while over-exposure to any chemical can be unhealthful, many low levels of chemicals are effective and beneficial. In the case of spa water, the chemicals recommended in the hot spring ® water maintenance program are needed to protect the user from water-borne pathogens (disease-caus...
Page 56: Service Information
Page 53 service information service information general information y our hot spring ® spa has been designed to provide years of trouble-free use. As with any appliance, problems may occasionally occur that require the expertise of a qualified service person. Though such simple repairs as resetting ...
Page 57: Acts Invalidating Warranty
Page 54 the spa) and verify that the cd tube and its transformer are energized (a slight buzz will be emitted from the ozone generator housing). If a slight buzz or hum is not audible, verify that the generator is completely plugged into the spa’s control box. If the unit is plugged in and power is ...
Page 58: Troubleshooting
Spa water maintenance troubleshooting guide cloudy water water odor chlorine odor musty odor • dirty filters • excessive oils / organic matter • improper sanitization • suspended particles / organic matter • overused or old water • excessive organics in water • improper sanitization • low ph • chlor...
Page 59
Page 56 care and maintenance record spa care and maintenance record drain and clean spa shell d ra in a n d c le a n s p a s h e ll spray clean filter cartridge s p ra y c le a n f ilt e r c a rt ri d g e soak filter cartridge s o a k f ilt e r c a rt ri d g e restain everwood r e s ta in e v e rw o...
Page 60
Watkins manufacturing corporation vista, california usa this manual contains installation, operating, maintenance and service information for the following hot spring ® spa models: usa models effective date canadian models effective date landmark ® (model s) 4/02 landmark (model sc) 4/02 grandee ® (...