WATSON Rapid Charger Owner's Manual - page 7
Charger Operation | 7
(B) Battery Charging
1
Insert 1 -8 AA/AAA batteries into the
battery chambers as indicated by the
polarity symbols (+ and -) marked inside
each chamber.
2
Press DISCHARGE once to discharge
AA/AAA batteries. The battery icon will
shift up and down while discharging.
3
When the batteries are fully discharged,
the battery icon stops shifting. It will
then display the battery capacity while
charging.
4
However, a flashing full-battery icon
indicates an abnormality, such as the
presence of bad batteies or alkaline
batteries, and the charger will stop
charging.
5
When batteries are fully charged, the
full-battery icon lights.
6
When charging is completed, unplug
the charger from the outlet and then
remove the batteries from the charger.