1. DL manuals
  2. WattAge
  3. Toy
  4. Hyper Wing
  5. Instructions For Final Assembly

WattAge Hyper Wing Instructions For Final Assembly

Summary of Hyper Wing

  • Page 1

    1 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net specifications: ● wing span: 39.2 inches ● wing area: 321.5 square inches ● length: 18 inches ● weight rtf: 13 - 15 ounces ● wing loading: 5.75 - 7 ounces per square foot ● functions: ailerons...

  • Page 2

    2 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com table of contents this r/c airplane is not a toy! If misused or abused, it can cause serious bodily injury and/or damage to property. Fly only in open areas and preferably at a ded...

  • Page 3

    3 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net thank you for purchasing the new wattage hyper wing 400 ep. Before completing the final assembly of your new airplane, please carefully read through this instruction manual in its entirety. Do...

  • Page 4

    4 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com this section describes our recommendations to help you in deciding which types of accessories to purchase for your new hyper wing 400 ep. We've also included some information on th...

  • Page 5

    5 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ kwik bond 5 minute epoxy # 887560 ❑ kwik bond thick c/a # 887510 ❑ pacer z-42 threadlocker # 339162 ❑ # 0 & # 1 phillips head screwdrivers ❑ 1.5mm hex wrench ❑ magnum z-bend pliers # 237473 ...

  • Page 6

    6 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com we have organized the parts as they come out of the box for easier identification during assembly. Before you begin assembly, group the parts as we list them below. This will ensur...

  • Page 7

    7 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net while not "mandatory," we do strongly suggest taking some time to break in the motor. This accomplishes two very important things: breaking in the motor will maximize its performance and, most...

  • Page 8

    8 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ kwik bond 5 minute epoxy ❑ excel modeling knife ❑ scissors ❑ ruler ❑ pencil ❑ masking tape ❑ (1) right & left wing panels ❑ (2) ailerons ❑ (2) fiberglass dowels (long) ❑ (1) fibe...

  • Page 9

    9 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ remove the protective backing from one strip of plastic reinforcement tape and carefully apply the strip of tape to the bottom of one wing panel. To align it properly, the front edge of the ...

  • Page 10

    10 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ mix a generous amount of 5 minute epoxy and carefully apply a thin layer to the root end of both wing panels. ✦ ✦ ✦ ✦ ✦warning✦ ✦ ✦ ✦ ✦ for maximum wing strength, make sure to c...

  • Page 11

    11 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ carefully push the leading edge of the aileron up against the trailing edge of the wing. ❑ with the tip of the aileron 1/8" in from the tip of the wing (so it doesn't hit the wing tip fence...

  • Page 12

    12 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ using thick c/a, carefully glue the three plywood motor rails to one side of the fiberglass motor plate, making sure to roughen the fiberglass first so that the c/a will stick t...

  • Page 13

    13 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ with the motor in position, carefully pull the two zip-ties tight to secure the motor firmly in place. ❑ using wire cutters, cut away the excess zip-tie material, making sure to leave enoug...

  • Page 14

    14 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ carefully install the two servos into the wing using double-sided foam tape. When positioned properly, the servos should be centered within the molded servo bays and the servo h...

  • Page 15

    15 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ repeat the previous procedures to install the second control horn and pushrod assembly on the other side of the wing. ✦ ✦ ✦ ✦ ✦important✦ ✦ ✦ ✦ ✦ the center-trim position of the ailerons de...

  • Page 16

    16 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ install your flight battery on the centerline of the molded radio bay, using the strip of self-adhesive velcro ® . ☞ before removing the flight battery, we suggest allowing the ...

  • Page 17

    17 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ❑ with the hatch cover firmly in place and aligned, use the tip of your modeling knife to make a pilot hole through each side of the hatch cover and into the plastic mounting board. Position ...

  • Page 18

    18 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com ❑ install the hatch cover by squeezing it together slightly and sliding the slots underneath the heads of the two wood screws. ☞ if necessary, adjust the height of the wood screws...

  • Page 19

    19 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ✦ ✦ ✦ ✦ ✦important✦ ✦ ✦ ✦ ✦ when installing the propeller adapter in the next procedure, we strongly suggest applying threadlocker to the grub screw to prevent the grub screw from loosening d...

  • Page 20

    20 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com section 10: control throws we recommend setting up the hyper wing 400 ep using the control throws listed below. These control throws are suggested for initial test-flying because ...

  • Page 21

    21 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net ● cycle the flight battery three times. When nimh or nicd batteries are new they need to be used 2-3 times before they will produce their top voltage and duration. To cycle them, simply charg...

  • Page 22

    22 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com section 13: replacement parts list wattage stocks a complete line of replacement parts for your hyper wing 400 ep. Listed below are the replacement parts that are available along ...

  • Page 23

    23 need help or have any questions? Call us at 1-714-963-0329 or send us an email at service@globalhobby.Net telling us what you like and don't like determines what model kits we make and how we make them. We would appreciate it if you would take a few minutes of your time to answer the following qu...

  • Page 24

    24 visit our website at http://watt-age.Globalhobby.Com or for customer service at http://globalservices.Globalhobby.Com fold along dotted line fold along dotted line global hobby distributors attn: global services 18480 bandilier circle fountain valley ca 92728-8610 post office will not deliver wit...