Watts 519 Installation & Operation Manual - Programmable Settings
3of6
©203WattsRadiant
Programmable Settings
Setting
Display
User settings. Press the and buttons together for 3 seconds to enter and
advance to the next setting.
MODE
Selectheatoroff.
Range:HEAT,OFF
Default:HEAT
UNITS
Selectthetemperatureunits.
Range:°For°C
Default:°F
LIGHT
Selectwhenthedisplaybacklightshouldoperate.Auto
operatesthebacklightfor30secondsafterakeystroke.
Range:OFF,AUTO,ON
Default:AUTO
SET FLOOR
Setthefloorminimumtemperature.Availablewhenan
auxiliaryfloorsensorisconnectedandthebuilt-inroom
sensorison.
F
Range:OFF,40to22°F(4.5to50.0°C)
Default:72°F(22.0°C)
TyPE
DeviceTypenumber.Holdthe buttontoviewthe
softwareversion.
ESCAPE
Releasethe and buttonstoreturntothehomescreen.
Installer settings. Press the and buttons together for 5 more seconds.
AUxILIARy SENSOR
Selectthetypeofauxiliarysensor.Availablewhenanauxiliary
sensorisautomaticallydetected.
Range:NONE=noauxiliarysensor,ROOM=Indoor
Sensor,FLOR=SlabSensor,OUT=OutdoorSensor
Default:OFF
ROOM SENSOR
Selectifthebuilt-inroomtemperaturesensorisonoroff.The
built-inroomsensorcanonlybedisabledwhenanauxiliary
roomorslabsensorisconnected.
Room
Range:ONorOFF
Default:ON
SET FLOOR MAxIMUM
Setthefloormaximumtemperatureinordertoprotectthe
floorcovering.Suggestedsettings:Tile=90°F(32°C),Wood
Floor=85°F(29°C)
F
MAX
Range:40to22°F(4.5to50.0°C),OFF
Default:85°F(29.5°C)
ESCAPE
Releasethe and buttonstoreturntothehomescreen.