Watts Premier FILTER-PURE Installation, Operation And Maintenance Manual - Flow Diagram
Sink
Green
Tubing
Blue
Tubing
HOT
COLD
Counter Top
Two Stage Under Counter (Filter Pure)
This system has been designed to fit under most kitchen sinks.
Please read the entire manual carefully before proceeding with installation.
Mount the System Under the Sink
Step 4
Determine best location for the filtration system to be mounted near the cold water
supply angle stop valve to allow for future system maintenance.
Using the mounting holes on the system bracket, mark the location for the mounting
screws on the cabinet wall. In the parts bag, locate the 2 self tapping screws. Using
an electric drill with a Phillips bit, screw them into the cabinet wall.
Mount the filtration system.
Step 5
5
Flow Diagram
Step 1
The two quick connect elbows are pre installed in to the back of the Filter-Pure
system. These elbows can be rotated in order to allow for the green and blue tube
Take the green tube and push in to the quick connect elbow that is by the red colored
sediment filter on the left of the system. Make sure the tube is fully pushed in all the
way to the tube stop.
Step 2
Take the blue tube and push in to the quick connect elbow that is by the yellow
colored carbon filter on the right of the system. Make sure the tube is fully pushed
in all the way to the tube stop.
Step 3