Wattstopper LMPX-100-4 Installation Instructions

Summary of LMPX-100-4

  • Page 1

    Wattstopper ® dlm - occupancy sensor pir corner mount with one-way aisle lens installation instructions • instructions d’installation • instrucciones de instalación no: 24782 – 09/16 rev. 1 catalog number • numéro de catalogue • número de catálogo: lmpx-100-4 country of origin: made in china • pays ...

  • Page 2

    2 room controller j box occupancy sensor switch to load/line (class 1 wiring) dlm local network (low voltage, class 2) lmrj cables caution: to connect a computer to the dlm local network use the lmci-100. Never connect the dlm local network to an ethernet port – it may damage computers and other con...

  • Page 3

    3 factory pre-set operation sensor parameters t-delay time delay 20 minutes passive infrared sensitivity 90% wt walk-through off load parameters load 1 loads 2-8 or more** plug load on mode operation* auto- on manual-on if switch is used. Auto-on if switch is not used. Auto-on blink warning off off ...

  • Page 4

    800.879.8585 www.Legrand.Us/wattstopper no. 24782 – 09/16 rev. 1 © copyright 2016 legrand all rights reserved. © copyright 2016 tous droits réservés legrand. © copyright 2016 legrand todos los derechos reservados. Wattstopper warranties its products to be free of defects in materials and workmanship...