Wattstopper WN-100 Installation instructions manual

Summary of WN-100

  • Page 1

    Wn-100 motion sensor nightlight switch specifications wn-100-120 voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120vac, 60hz power consumption . . . . . . . . . . . . . . . . . . . .0.92w maximum load requirements . . . . .0-500w incandescent, fluorescent . . . . . . . . . . ...

  • Page 2: Unit Description

    Unit description the watt stopper wn-100 is a motion sensing wall switch and nightlight that controls lighting based on occupancy. The sensor uses passive infrared (pir) technology to sense human motion in a controlled space. It must have a clear view of occupants in the space in order to detect occ...

  • Page 3: Coverage Patterns

    Coverage patterns the wn-100 has a coverage range of 180 degrees and a maximum coverage area of 300 sq. Ft. To maintain its coverage capacity and optimally detect motion, the wn-100 must have a clear and unobstructed view. 4.0' (1.2m) 25' (7.6m) floor hot black neutral white load load red neutral wh...

  • Page 4: Installation

    Installation caution: a neutral connection is required for sensor operation. A qualified electrician should be consulted regarding the availability of a neutral in your particular installation. 1. Make sure that power has been turned off at the circuit breaker. 2. Connect the existing wires to the s...

  • Page 5: Programming The Wn-100:

    Sensor adjustment & programming the wn-100 is designed for installation in hotel rooms and other semi-public spaces. Custom setup features are intended for facility or installing personnel only. Therefore, the program mode switch is located behind the cover plate. To enable the programming mode, the...

  • Page 6: Troubleshooting

    Troubleshooting to test the wn-100: initiate the wn-100 test mode by sliding the program mode switch up to the on (program) position then back to the down (end user) position. When the switch is returned to the down (end user) position, there will be a five-minute test period. During this period, th...

  • Page 7: Ordering Information

    When ordering, add -w for white, -i for ivory for -a for light almond to the catalog number. * one asp-211 is included with each sensor. Wn-100-120 motion sensor nightlight switch 120vac, 60hz wn-100-277 motion sensor nightlight switch 277vac, 60hz asp-211* cover plate for single-gang box asp-422 bl...