Igps-m user’s manual 1.
Igps-m user’s manual 2 installation .................................................................. 3 troubleshooting ............................................................... 5 igps-m introduction ........................................................... 6 igps-m key feature ...............
Igps-m user’s manual 3 installation step i ：check your igps-m package please check the igps-m package. If any items are missing or damaging, please contact our distributor immediately. The standard package of igps-m contains: l igps-m receiver l igps-m driver & utility cd l warranty card l quick ins...
Igps-m user’s manual 4 l using car charger: please follows the illustration as below. You have to plug in the connector into car socket in order to have power supply for both igps-m receiver and handheld device. Step iii ：check if the led is flashing. Once your pc/lap top or car charger supplies pow...
Igps-m user’s manual 5 troubleshooting when your igps-m receiver could not operate, please follow the instruction to do the troubleshooting as below. 1. Igps-m receiver’s led is not flashing l it means igps-m does not have power supply. Please check if the connector plugs in properly as the step ii....
Igps-m user’s manual 6 igps-m introduction the igps-m is an outstanding high sensitivity gps receiver. Its excellent performance easily conquers the most difficult tasks. In addition, it provides various functions to meet customers’ demand. Igps-m employs unav’s powerful gps solution. It provides ma...
Igps-m user’s manual 7 familiarize your igps-m dimensions length ：64 mm width：57 mm height：16.5 mm weight：85+/-5 gram interface as shown in the illustration on the right, the length of the wire on igps-m receiver is 2 meters. There is a 6 -pin connector for the connection to pc/lap top or handheld d...
Igps-m user’s manual 8 igps-m computer/lap top and handheld device cable following table lists each kind of cables for connecting different type of pc/lap top or handheld device. Category model number type rs232 cable igps-m-rs232c rs232 as i/o, power by usb usb cable igps-m-usbc usb for both i/o an...
Igps-m user’s manual 9 software interface nmea protocol igps-m receiver currently supported 2 1 nmea commands and 7 nmea messages. The nmea commands include nmea, start, stop, store, restore, autostart, fixrate, datum, pwrdown, ppsmode, surveylen, cabledel, ppspos, pulsepos, pulselen, initaid, altai...
Igps-m user’s manual 10 gga – global positioning system fix data time, position and fix related data for a gps receiver. Format:$gpgga,hhmmss.Dd,xxmm.Dddd,,yyymm.Dddd,,v,ss,d.D,h.H,m,g.G,m,a. A,xxxx*hh example: $gpgga,134829.48,1126.6639,s,11133.3299,w,1,07,1.0,,,,,,*15 parameter description example...
Igps-m user’s manual 11 rmc – recommended minimum specific gnss data time, date, position, course and speed data. Format: $gprmc,hhmmss.Dd,s,xxmm.Dddd,,yyymm.Dddd,,s.S,h.H,ddmmyy,d.D, ,m*hh example: $gprmc,134829.486,a,1126.6639,s,11133.3299,w,58.31,309.62,110200,,,a*14 parameter description example...
Igps-m user’s manual 12 gsv – satellites in view number of satellites in view, satellite id (prn) numbers, elevation, azimuth, and snr value. The information for four satellites maximum per one m essage, additional messages up to maximum of eight sent as needed. The satellites are in prn number orde...
Igps-m user’s manual 13 pfst,pps – pps signal the pulse per second message. Indicates the parameters of the pps pulse that will shortly be outputted. Provides the current gps time and timing correction of the coming pps pulse. Format: $pfst,pps,wwww,tttttt,n,xxxx*hh example: $pfst,pps,1161,309566,9,...
