Summary of G1800
Page 1
39 rue du gouverneur général eboué 92130 issy les moulineaux tél: 01 46 29 08 00 fax: 01 46 29 08 08 www.Wavecom.Com wmo2 g900 / g1800 / g1900 gsm modem version: 1.0 date: friday 21 may 1999 reference: wcom/gsm/wmo2/wmo2atdoc.
Page 2
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © ii document amendments issue date status author comments 1.1 21-05-99 p c. Guillemin n. Higelin o. Capron f. Desnoues d. Martinez creation.
Page 3
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © iii contents 1 introduction............................................................................1 1.1 document scope ........................................................................... 1 1.2 re...
Page 4
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © iv 3.3 global behaviour ......................................................................... 21 3.3.1 sim insertion, sim removal ........................................................ 21 3.3.2 backgrou...
Page 5
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © v 4.6.6 restore settings +cres............................................................... 51 4.6.7 show text mode parameters +csdh ........................................... 52 4.6.8 new message indicati...
Page 6
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © vi 4.12.1 setting up the module for fax ...................................................... 78 4.12.2 setting up the pc fax application: ................................................ 78 4.12.3 restoring...
Page 7
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 1 1 introduction this document is intended for every person being brought to work with the modem wismo wmo2 g900, g1800 or g1900. 1.1 document scope this document presents the technical characteristics of the...
Page 8
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 2 1.3 definitions for the purposes of the at-commands interface description in this document, the following definitions apply: command mode: in command mode, the modem is not communicating with a remote stati...
Page 9
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 3 2 technical data this section deals with the specifications of the second generation of wavecom's gsm modem. Under the generic reference wmo2-gxxxx are 3 different modems grouped: wmo2-g900 for gsm standard...
Page 10
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 4 2.2.2 headset the headset allows audio hands free function. This feature implements a weak power speakerphone and a microphone. Tbd: standard products 2.2.3 antenna two solutions could be proposed: • a stan...
Page 11
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 5 2.4.2.2 2.4.2.2production sticker production sticker this label is located on the bottom side of the product and contains ce marking (in order to improve the productivity on assembly line, this marking will...
Page 12
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 6 2.5 physical characteristics 2.5.1 shape the physical shape is given as follow: physical characteristic qualification comments dimension absolute maximum dimension 98x54x25 mm 110x54x25 mm without the conne...
Page 13
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 7 2.5.2 mechanical philosophy the mechanical casing of the wmo2 modem line is built from an aluminium profile ended by two stoppers at each edge. All input/output interfaces are realised through three connect...
Page 14
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 8 2.6 conditions of use 2.6.1 climatic and mechanical environment the following figure shows environment standard constraints: wmo2_gxxxx environnemental classes type of test standards storage transportation ...
Page 15
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 9 2.6.2 electrical environment the following table sums up electrical constraints in an automotive environment: length of transient cause energy capability voltage amplitude possible frequency of application ...
Page 16
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 10 2.7 electrical characteristics the following table summarises the electrical characteristics defined for the different input/output connections. Parameters min typ max unit comments power supply: input sup...
Page 17
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 11 2.8 connectors 2.8.1 connector location 2.8.2 connectors description we considered the following constraints in the connector choice: • size; • mechanical characteristics; • electrical performances; • indu...
Page 18
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 12 function connector type pining drawing ref. Supplier mating connector examples rf connector sma radiall: r284310085 radiall: r125073 serial link audio link boot reset sub d high density (15 pt.) 1 dcd (ct1...
Page 19
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 13 2.9 capabilities functions of the wmo2 modem line are defined as follow: gsm dcs/pcs standard 900 mhz. Class 4 (2w). Gsm phase 2. 1800 mhz or 1900 mhz class 1 (1w) gsm phase 2. Interface serial interface r...
Page 20
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 14 2.10.3 serial and audio link 2.10.3.1 2.10.3.1low power audio low power audio 2.10.3.2 2.10.3.2high power audio high power audio sub-d high density 15 points male + braid of shield soldered on sub d body +...
Page 21
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 15 2.10.4 remote modem control link also called "service cable". 2.10.5 power supply cordon cable length: 1,5 m low power audio cable as defined above cable length: 10 cm flat cable 4 wires: wire constitution...
Page 22
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 16 2.10.6 cables pinning assembly example sub-d 9cts sub-d 9cts connection connection sub d 15cts (rs232) sub d 15cts (rs232) signal name signal name 1 (white) 1 (white) Ü Ü 1 (white) 1 (white) dcd (ct109) dc...
Page 23
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 17 3 at commands interface this chapter describes the interface based on the hayes protocol standard between the te and the me. The at commands presented here in are intended to manage voice, data and fax com...
Page 24
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 18 3.1.1 request syntax 3.1.1.1 3.1.1.1basic syntax basic syntax at fixed baud rate uppercase or lowercase letters can be used to type in the at-commands. But the use of both upper and lower- case characters ...
Page 25
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 19 3.1.2 answer syntax there are 2 types of answers: information text and result codes. The answer of a command may be build of both an information text and a result code. The answer may be transmitted in num...
Page 26
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 20 3.2 default settings the following table shows the different storable parameters, the command to store them and there default value. Command command at&w at&w (e2p) (e2p) at+csas at+csas (sim, e2p) (sim, e...
Page 27
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 21 3.3 global behaviour 3.3.1 sim insertion, sim removal sim card insertion and removal procedures are supported. These are software functions based on the reading of the hardware sim presence pin. This pin s...
Page 28
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 22 3.3.2 background initialisation after a valid pin entry, many sim user data information are loaded in the modem memory (phonebooks, sms status…). This operation can last a long time when reading huge phone...
Page 29
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 23 4 commands set for convenience the and sequences are not indicated in the examples shown in the following description. 4.1 general commands 4.1.1 manufacturer identification +cgmi this command gives the ma...
Page 30
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 24 4.1.4 product serial number +cgsn this command allows the user application to know the imei of the modem. It is only a read command. There is no possibility to set a value or to test the parameters. Comman...
Page 31
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 25 4.1.7 card identification +ccid this command instructs the module to read the ef-ccid file on the sim card. Command syntax: at+ccid response syntax: +ccid: in case of absent ef-ccid file on the sim, the +c...
Page 32
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 26 4.1.11 set phone functionality +cfun this command selects the level of functionality in the mobile station. Command syntax: at+cfun= parameters: id to be set as described below. When the application wants ...
Page 33
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 27 4.1.12 phone activity status +cpas this command returns the activity status of the mobile. Command syntax: at+cpas response syntax: with the following values: 0 ready (allow commands from ta/te) 1 unavaila...
Page 34
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 28 4.2 call control commands 4.2.1 dial command d the atd command is used to establish a speech, data or fax call. Direct dialling from a phonebook location (stored in sim card) can be done. It is allowed to ...
Page 35
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 29 example: for a data or fax call, the application sends to the gsm module the following ascii string: (the bearer has to be selected before with the +cbst command) atd1234 calling number 1234 (data or fax)....
Page 36
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 30 4.2.3 answer a call a when the gsm module receives a call, it set the ringind signal and sends to the application the ascii string “ring” or “+cring: ” if cellular result code (+crc) is enabled. Then it wa...
Page 37
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 31 4.2.7 automatic answer ats0 this s-parameter controls the automatic answering feature of the mobile. Application to gsm ats0=2 automatic answer after 2 rings gsm to application ok application to gsm ats0? ...
Page 38
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 32 4.2.9 gain control +vgr, +vgt this command shall be used by the application to tune the receive gain of the speaker and transmit gain of the microphone. The application shall send at+vgr= for the receive g...
Page 39
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 33 this command instructs the module to set the microphone mute or not for the active microphone (defined with+speaker command). This command is only allowed during a call. Takes the following values: 0: micr...
Page 40
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 34 4.2.12 echo cancelation +echo command syntax: at+echo= , [,,, , ] this specific command is used to activate, deactivate or configure the echo cancelation function. Defined values : 0: deactivate echo 1: ac...
Page 41
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 35 4.3 network service related commands 4.3.1 signal quality +csq this command shall be used to know the received signal strength indication () and the channel bit error rate () with or without any sim card i...
Page 42
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 36 4.3.2 operator selection +cops to select the operator, three possibilities exist: 1- the mobile enters the manual mode, and then try to find an operator which is indicated by the application. If it finds a...
Page 43
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 37 4.3.3 network registration +creg this command is used by the application to know the registration status of the mobile. Command syntax: at+creg= response syntax: +creg: , [ ,, ] for at+creg? Command only 0...
Page 44
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 38 4.3.5 preferred operator list +cpol this command is used to edit the sim preferred list of networks. Command syntax: at+cpol= [ ][ , [ , ] ] the different possibilities are: at+cpol = to delete an entry. A...
Page 45
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 39 4.4 security commands 4.4.1 enter pin +cpin this command is used to enter me passwords (chv1 / chv2 / puk1 / puk2…) which are needed before any other functionality of the me can be used. The chv1/chv2 leng...
Page 46
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 40 example: 3 failed pin validations + 1 successful puk validation at+cpin? +cpin: sim pin read the pin status the gsm module requires sim pin at+cpin=1235 +cme error: 16 first attempt to enter a sim pin bad ...
Page 47
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 41 4.4.2 enter pin2 +cpin2 this specific command is used to validate the pin2 code (chv2), or to validate the puk2 code (unblock chv2) and to define a new pin2 code. Of course +cpin command allows to validate...
Page 48
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 42 4.4.4 facility lock +clck this command shall be used by the application to lock, unlock or interrogate a me or network facility . Command syntax: at+clck= ,[,[,] ] response syntax: +clck: [ , ] +clck: , [ ...
Page 49
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 43 any attempt to combine different classes will result in activation / desactivation / interrogation of all classes. The password maximum length is given with the at+cpwd=? Command. Application to gsm at+clc...
Page 50
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 44 4.5 phonebook commands 4.5.1 select phonebook memory storage +cpbs this command selects phonebook memory storage. The available phonebooks are the adn (sim), fdn (sim fixdialling, restricted phonebook), an...
Page 51
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 45 4.5.4 write phonebook entry +cpbw this command writes phonebook entry in location number in the current phonebook memory storage. Application to gsm at+cpbw=? Test command gsm to application +cpbw: (1-50),...
Page 52
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 46 4.5.5 phonebook phone search +cpbp this specific command instructs the module to look in the phonebook for an item having the same phone number that defined in parameter. Command syntax: at+cpbp= is coded ...
Page 53
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 47 4.5.6 move action in phonebook +cpbn command syntax: at+cpbn = this specific command instructs the module to make a forward or a backward move in the phonebook (in alphabetical order). May take the followi...
Page 54
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 48 4.5.7 subscriber number +cnum this command returns the msisdn(s) related to the subscriber. If subscriber has different msisdns for different services, each msisdn is returned in a separate line. Command s...
Page 55
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 49 4.6 short message service commands 4.6.1 parameters definition destination address, coded like gsm 03.40 tp-da data coding scheme, coded like in document [5]. Discharge time in string format: "yy/mm/dd,hh:...
Page 56
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 50 4.6.2 select message service +csms the supported services are gsm originated (sms-mo) and terminated short message (sms-mt), cell broadcast message (sms-cb) services. The syntax is: at+csms= : 0: sms at co...
Page 57
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 51 4.6.4 preferred message format +cmgf the formats implemented are the text mode and the pdu mode. In pdu mode, a complete sms message including all header information is passed as a binary string (in hexade...
Page 58
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 52 4.6.7 show text mode parameters +csdh this commands gives more informations in text mode result codes. These informations are in brackets in commands +cmti, +cmt, +cds, +cmgr, +cmgl. Application to gsm at+...
Page 59
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 53 examples: application to gsm at+cnmi=0,1,0,0,0 =1 gsm to application ok gsm to application +cmti: "sm", 1 message received application to gsm at+cnmi=0,2,0,0,0 =2 gsm to application ok gsm to application +...
Page 60
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 54 4.6.10 list message +cmgl this command allows the application to read stored messages, by indicating the type of the message to read. Command syntax: at+cmgl= response syntax for text mode: +cmgl: ,,[,], [...
Page 61
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 55 4.6.11 send message +cmgs command syntax in text mode: at+cmgs= [ , ] text is entered command syntax in pdu mode: at+cmgs= pdu is entered the message is sent. To send the message, simply type character (as...
Page 62
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 56 4.6.12 write message to memory +cmgw this command stores a message to memory storage (either sms-submit or sms-delivers). The memory location is returned (no choice possible as with phonebooks +cpbw). The ...
Page 63
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 57 4.6.13 send message from storage +cmss this command sends message with location value from storage to the network. Command syntax: at+cmss=[, [,] ] response syntax: +cmss: or +cms error: if sending fails i...
Page 64
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 58 4.6.14 set text mode parameters +csmp this command shall be used to select value for the , , the . The application must send the following command: command syntax: at+csmp=, , , byte is composed of 6 diffe...
Page 65
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 59 4.6.16 service center address +csca this command shall be used to indicate to which service center the message has to be sent. The gsm module has no default value for this address. If the application tries...
Page 66
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 60 4.7 supplementary services commands 4.7.1 call forwarding +ccfc this commands allows control of the call forwarding supplementary service. Command syntax: at+ccfc= , [, [, [, [, [, [, ] ] ] ] ] ] response ...
Page 67
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 61 4.7.2 call barring +clck this commands allows control of the call barring supplementary service. Locking, unlocking or querying the status of a call barring is possible for all or a specific class. Command...
Page 68
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 62 4.7.4 call waiting +ccwa this command allows control of the call waiting supplementary service. The module supports only one communication. If a call waiting call happens, the module will disconnect it but...
Page 69
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 63 4.7.5 calling line identification restriction +clir this command allows control of the calling line identification restriction supplementary service. Command syntax: at+clir= response syntax: +clir:, (for ...
Page 70
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 64 4.7.7 connected line identification presentation +colp this command allows control of the connected line identification presentation supplementary service, useful in case of call forwarding of the connecte...
Page 71
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 65 4.7.8 advice of charge +caoc command syntax: at+caoc= this refers to advice of charge supplementary service (gsm 02.24 [] and gsm 02.86 []) that enables subscriber to get information about the cost of call...
Page 72
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 66 4.7.10 accumulated call meter maximum +camm set command sets the advice of charge related accumulated call meter maximum value in sim file ef acmmax . Acmmax contains the maximum number of home units allow...
Page 73
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 67 4.8 data commands 4.8.1 bearer type selection +cbst command syntax: at+cbst= , , no data compression is provided and only asynchronous modem is supported ( = 0). Description modem type 0 autobauding none 1...
Page 74
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 68 4.8.3 cellular result codes +crc this command enables a more detailed ring indication, in case of incoming call (voice or data). Instead of the string "ring", an extended string is used to indicate which t...
Page 75
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 69 4.9 v24-v25 commands 4.9.1 fixed dte rate +ipr this commands specifies the data rate at which the dce will accept commands. Application to gsm at+ipr? Gsm to application +ipr: 9600 ok current rate is 9600 ...
Page 76
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 70 4.9.2 dte-dce character framing +icf this command is used to determine the local serial port start-stop (asynchronous) character framing that the dce shall use. Command syntax: at+icf= , * : 0 autodetect n...
Page 77
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 71 4.9.3 dte-dce local flow control +ifc this command is used to control the operation of local flow control between the dte and dce. At+ifc=, * : 0 none supported 1 xon/xoff local circuit 103 not supported 2...
Page 78
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 72 4.9.6 set dsr signal &s this commands controls the data set ready (dsr) signal. Application to gsm at&s0 dsr always on gsm to application ok command valid application to gsm at&s1 dsr off in command mode, ...
Page 79
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 73 4.9.12 auto-tests &t at&t0 is used to perform auto-tests. The response will be ok if no software problem is detected (e2p, ram and rom checksums), otherwise a simple error response is sent. At&t1 is used t...
Page 80
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 74 4.10.2 automatic rxlev indication +cced the cced command has been extended to indicate the the received signal strength indication (rssi) of the main cell. The principle of the command is not changed: comm...
Page 81
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 75 4.10.3 general indications +wind wavecom introduced a general mechanism to send unsollicited non standardized indication to the customer application. The yet identified unsollicited non standardized indica...
Page 82
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 76 4.10.5 data ciphering mode +crypt this command enables or disables the data ciphering (d.E.S algorithm) of the pin and a random value sent periodically in order to insure a more secure communication. Appli...
Page 83
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 77 4.10.10 read language preference +wlpr command syntax: at+wlpr= response syntax: +wlpr: read a language preference value of ef-lp. The first indexes sould have the highest priority. Application to gsm at+w...
Page 84
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 78 4.12 fax management commands the fax service provided by the module is class 1 compatible. However only the core commands defined by itu t.31 are supported. These are: • at+frh=3, at+frh=?, • at+fth=3, at+...
Page 85
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 79 5 miscellaneous 5.1 disclaimer modem and gsm-unit specifications and manuals are subject to change without notice. Wavecom assumes no liability for damage incurred directly or indirectly from errors, omiss...
Page 86
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 80 6 appendices 6.1 me error result code: +cme error: meaning resulting from the following commands 3 operation not allowed all gsm 07.07 commands (+cme error: 3) 4 operation not supported all gsm 07.07 comma...
Page 87
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 81 6.3 specific error result codes meaning resulting from the following commands 512 mm establishment failure (for sms) +cmgs, +cmss (+cms error: 512) 513 lower layer failure (for sms) +cmgs, +cmss 514 cp err...
Page 88
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 82 6.4 ie cause values from gsm 04.08 recommendation cause value diagnostic 1 unassigned (unallocated) number 3 no route to destination 6 channel unacceptable 8 operator determined barring 16 normal call clea...
Page 89
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 83 all other values in the range 0 to 31 shall be treated as cause 31. All other values in the range 32 to 47 shall be treated as cause 47. All other values in the range 48 to 63 shall be treated as cause 63....
Page 90
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 84 6.5 gsm 04.11 annex e-2: mobile originating sm-transfer these error causes could appear for sms commands (+cmgs, +cmss, +cmgd…) cause no 1: "unassigned (unallocated) number" this cause indicates that the d...
Page 91
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 85 cause no 96: "invalid mandatory information" this cause indicates that the equipment sending this cause has received a message where a mandatory information element is missing and/or has a content error (t...
Page 92
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 86 6.8 intermediate result codes verbose result code numeric (v0 set) description +colp:, as verbose outgoing call presentation +cr: as verbose outgoing call report control +ilrr: as verbose local ta-te data ...
Page 93
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 87 6.9 operator names country initials mcc mnc name type of network country name a 232 1 austria a1 gsm900 austria a 232 3 max.Mobil gsm900 austria al 726 1 al a m c gsm900 albania and 213 3 mobiland gsm900 a...
Page 94
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 88 country initials mcc mnc name type of network country name hk 454 6 hk smartone gsm900 hong kong hk 454 10 hk nwt gsm1800 hong kong hk 454 12 hk peoples gsm1800 hong kong hk 454 16 hk sunday gsm1800 hong k...
Page 95
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 89 country initials mcc mnc name type of network country name qat 427 1 qat q-net gsm900 qatar ra 283 1 ra armmo1 gsm900 armenia rl 415 1 rl cellis gsm900 lebanon rl 415 3 rl libancell gsm900 lebanon roc 466 ...
Page 96
Wmo2 g900 / g1800 / g1900 wcom/gsm/wmo2/wmo2atdoc friday 21 may 1999 wavecom confidential © 90 country initials mcc mnc name type of network country name usa 310 120 usa pcs prime pcs1900 usa usa 310 130 usa pcs prime pcs1900 usa usa 310 140 usa pcs prime pcs1900 usa usa 310 150 usa bellsouth pcs190...