Wavecom W51PC User Manual - Rawdata Format For Fax
10
•
Class W51Param
User Manual W51PC DCOM Interface V1.1
HRESULT NewSystemStatus([in] BOOL Idle, [in] BOOL Traffic, [in]
BOOL Error, [in] BOOL RQ, [in] BOOL Auto, [in] BOOL Sync, [in]
BOOL Phasing, [in] long Level);
Call back function used to indicate the system status and level. All the
system status parameters are returned as BOOL values that can be
TRUE or FALSE. The level indicator parameter returns a value between
0 and 12. This function can be enabled or disabled using the EnableCall-
BackStatus function on the system interface.
RawData format for FAX
From W51PC Software Version 6.2 on, fax data is transferred by the Ne-
wRawData routine.
•
60 rpm = 1920 pixel/line
•
90 rpm = 1280 pixel/line
•
120 rpm = 960 pixel/line
•
180 rpm = 640 pixel/line
•
240 rpm = 480 pixel/line
•
HELL = 28 pixel/line
Color Table for FAX modes
In the FAX modes (PRESS-FAX / WEATHER-FAX / METEOSAT /
NOAA-GEOSAT) the values from 0 to 255 represent specific colors
which are used for drawing the fax output. The colors (RGB values) for
each value are listed in the following table. RGB(0, 0, 0) corresponds to
black and RGB(255, 255, 255) corresponds to white
Class W51Param
The client application can use the W51Param class to extract parameters
from the “blob” of state information returned by the server. The
W51Param class is implemented as an in-process server.
ICW51Param
The Iw51Param interface takes a “blob” as input and then returns the
value of any requested parameter as a string. The client application can
then display these strings in a user-friendly way. The interface can also
be used to set parameter values and to build “blobs” that can be stored in
a database or sent to the Server.