Waveshare 5inch HDMI LCD (G) User Manual - page 7
5inch HDMI LCD (G) User Manual
6
4.
Power on your PC. ( If you connect the LCD when the PC is working, and the display don’t
display as expect, please restart your PC).
Note: You must first connect the USB cable (for touch or power) before the HDMI cable.
CALIBRATION ON WINDOWS 10
If you need to calibrate the LCD when working with win 10 PC, you can follow this
instruction.
1.
Search Tablet PC Settings on Control Panel.
2.
Open the Tablet PC Settings tool and choose Calibrate...
3.
Finish the calibration following prompt
TOUCH SCREEN SETTING
When you connect a touchscreen to PC, the touch is available for main display no matter
the touchscreen is set as main display or second display or other. You can configure it to control
second or others screen in win 10 PC as below.
1.
Search Tablet PC Settings on Control Panel
2.
Open the Tablet PC Settings and Choose Setup…
3.
Then all the screen which connected to PC will become white and prompt is show in the
main display.
Touch this screen to identify it as the touchscreen. If this is not the Tablet PC screen,
press Enter to move to the next screen. To close the toll, press Esc.
4.
As example, we want to let the touchscreen to control the second display. So we press Enter
to skip the main display.
5.
After step 4. You will find that the prompt is showed at the second display and the main
display became white. Now you can touch the center of touchscreen.
6.
The prompt will skip to the third display as same. Or if there are only two display the
configuration will finish.
7.
After the configuration you can find that the touchscreen now controls the second display
now.
Note: If you connect two touchscreens to PC, you can use this method to make both
touchscreen work at two different display.