Operator’s manual tc-253a temperature converter ® tm temper atur e con ve rter.
Warranty the tc-253a temperature converter is warranted against any defects of material or workmanship within a period of one (1) year following the date of purchase of the instrument by the original purchaser or user. Any accessory claimed to be defective during the warranty period should be return...
Warning! N to avoid electrical shock, do not use this instrument when voltages at the measurement surface exceed 24v r.M.S. Ac or 60v dc. N to avoid damage or burns – do not make temperature measurements in microwave ovens. Unpacking and inspection upon removing your new temperature converter from i...
Preparation and caution before measurement 1. Before measurement, warm up for at least 30 seconds, after connecting the thermocouple to the connector of the temperature converter. 2. If the instrument is used near noise generating equipment, be aware that the voltage output may become unstable or in...
Emc: this product complies with requirements of the following european community directives: 89/336/eec (electromagnetic compatibility) as amended by 93/68/eec (ce marking). Directive73/23/eec (low voltage) does not apply to this product. However, electrical noise or intense electromagnetic fields i...
Tp-255 bead thermocouple: temperature range: -40ºc to 204ºc (-40ºf to 400ºf). Tolerances: = (2.2ºc or 0.75%) from 0ºc to 204ºc = (2.2ºc or 2.0%) from 0ºc to -40ºc wire length: 1 meter, with miniature plug. Teflon tape insulated. Maintenance: warning! To avoid electrical shock remove test thermocoupl...
Figure 2 battery 9v screw repair read the warranty located at the front of this manual before requesting warranty or non- warranty repairs. For warranty repairs, any multimeter claimed to be defective can be returned to any authorized wavetek meterman distributor or to a wavetek meterman service cen...
Manual revision date 08/00 manual part number 1564694 information contained in this manual is proprietary to wavetek meterman and is provided solely for instrument operation and maintenance. The information in this document may not be duplicated in any manner without the prior approval in writing fr...
