Wavetek TMD90 User Manual - page 6
Other manuals for TMD90:
User Manual
Manual is about: Dual Input Digital Thermometer
of
12
W
Caution
Read all Safety Information before using this
thermometer.
Functions
Auto Power Off (Sleep Mode)
The TMD90 shuts off automatically approximately 20 minutes after
being turned on. For recording or operating over longer periods of time
you can disable the sleep mode by pressing
D
and
A
simultaneously while power on. When "n" then appear in the center of
the screen you can release the On. Auto power off is disabled when you
turn off the meter.
Change Thermocouple Type
Press
E
and
D
simultaneously for 2 or more seconds until K
appears. Press the
C
button the type of probe cycles through K
(the default), J, T, R, S, and E types. The current mode is displayed on
the left side of the LCD. press
E
, an "S" will appear in the center of
the screen.