Way2call Hi-Phone Maestro Quick Reference Manual
Hi-Phone Maestro
™
Back Panel
(1) Line Jack (line #4)
(7) Headset Speakers Jack 3.5mm
(2) Line Jack (line #3)
(8) Headset Microphone Jack 3.5mm
(3) Line Jack (line #2)
(9) USB Jack
(4) Line Jack (line #1)
(10) AC Power Adapter (7.5VDC) Jack
(5) Phone Jack
(11) Thumb wheel assignable Control
(6) RJ-12 Headset Jack
(default: Headset Volume)
Care and Maintenance
•
Handle device with care.
•
Avoid dropping the device.
•
Do not open the device’s cover. This will void warranty.
•
Do not use the device in excessive temperature environment.
•
Do not expose the device to water or high humidity.
Lightning storm warning
Lightning storms can damage the device thru the phone line wires.
It is recommended to avoid using electric appliances during storms.
P/N: DOC2017
Notes:
1
An analog telephone is any phone that works on your regular analog line (see note #3 below).
A telephone with Caller-ID display, a telephone with an answering machine, Cordless phone,
etc., may also be used.
2
A standard headset with RJ-12 or a standard PC headset with two 3.5mm connectors can be
used with the Hi-Phone Maestro™ device.
3
Analog line can be one of the followings: A standard Analog line from your Telephone
Company, a standard extension from your PBX, a Centrex connection, etc. It cannot be a
digital PBX extension (usually 4 wires), ISDN, or any other digital connection.
Hi-Phone Maestro™
Quick Reference Guide
Version 3.0
Getting started
Thank you for choosing the Hi-Phone Maestro™, one of our latest innovated CTI
(Computer Telephony Integration) products.
For more information about other products, latest drivers and SDK
(Software Development Kit), Please visit our web site at:
www.way2call.com
Package Contents
•
Hi-Phone Maestro™ device
•
RJ11 telephone cable
•
USB cable
•
AC power adapter
•
This Quick Reference Guide
•
End User License Agreement
•
Installation CD
System Requirements
•
Pentium III processor or higher
•
Windows
®
2000/XP/Vista 32 bit
•
10 MB free hard disk space
•
Available USB port
•
An analog telephone set
1
(optional)
•
A suitable headset
2
(optional)
•
An analog telephone line
3
(POTS) or
an analog extension of a PBX
Hi-Phone Maestro™ Front Panel
The Hi-Phone Maestro™ front panel has 8 LED ICONS indicators:
Icon
Function
Description
Power
Lit: The AC adapter is connected.
USB
Lit: The PC has configured the device and loaded its drivers.
Blinking: The USB cable is disconnected.
Fading: Power suspend mode.
Headset
Lit: A headset is connected and in use.
Phone
Lit: The local phone is off-hook.
Line
1/2/3/4
Lit: The device has opened the line to make or answer calls.
Fast Blink: Incoming line ring follower.
Slow Blink: line is on hold, or the attached phone/headset is
muted.