Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Reta...
2 2. Suction hose and fitting must be airtight. An air leak in the suction line may prevent priming of the pump. Use of thread sealant is recommended. Suction lines must be reinforced hose or rigid pipe. Non-reinforced hose will collapse due to the suction created by the pump and prevent pump from o...
3 performance information performance curve 100 80 60 40 20 1200 2400 3600 4800 6000 7200 capacity - gph total dynamic head - feet 0 2” cast iron pump performance gps400 www.Waynepumps.Com capacities in gallons per hour discharge head - feet dynamic suction lift - feet 0 5 10 15 20 25 20 6600 6420 6...
4 lay flat discharge hose part #16511 • economical • lightweight • resistant to oils, light chemicals, abrasion and sunlight • will not rot, mildew or absorb water hose couples one end with 2” hose thread. One 25 ft. Hose per carton suction hose part #16510-002 • reinforced to prevent collapse under...
5 1 engine 57800-001 1 2 volute bracket 56724-001 1 3 & 3a impeller kit with shims 66057-wyn1 1 4 screw 17046-001 1 5 key 16997-001 1 6 shaft seal kit (viton ® ) 56712 1 7 volute 56723-001 1 8 pipe plug, 3/4 npt 15921 2 9 volute gasket 15556-002 1 10 cap screw, 5/16 - 18 x 1 12701 5 11 cap screw, 5/...
6 notes operating instructions and replacement parts list www.Waynepumps.Com.
7 gps400 www.Waynepumps.Com maintenance / service record date maintenance performed replacement components required.
8 limited warranty for one year from date of purchase, wayne water systems (”wayne pumps“) will repair or replace, at its option, for the original purchaser any part or parts of its sump pumps or water pumps (”product“) found upon examination by wayne pumps to be defective in materials or workmanshi...
