Wayne 370100-001 Operating Instructions Manual

Caution indicates a 

potentially

hazardous situation which, if not

avoided, MAY result in minor or

moderate injury.

Notice indicates 

indicates important

information, that if not followed, may

cause damage to equipment.

General Safety

Information

1. Know the pump application,

limitations, and po ten tial hazards.

Do not

use to

pump flammable or explosive

fluids such as gasoline, fuel

oil, kerosene, etc. Do not use

in flammable and/or explosive

atmospheres. Use pump only with liquids

compatible with pump component

materials. Failure to follow this warning

can result in personal injury and/or

property damage.

2. Make certain that the power supply

conforms to the requirements of

the unit.

Disconnect power before

servicing. If the power dis -

con nect is out of sight, lock

Please read and save these instructions. Read carefully

before attempting to assemble, install, operate or maintain

the product described. Protect yourself and others by

observing all safety information. Failure to comply with

instructions could result in personal injury and/or property

damage! Retain instructions for future reference.

Description

A condensate unit removes

condensation from air conditioning

and high efficiency furnaces. The

compact design of the unit consists of a

3/8” ID discharge and 6 ft. long power

cord. The unit also contains a safety

switch to automatically shut off pump

in the event of a failure.

Unpacking

Inspect this unit before it is installed.

Occasionally, products are damaged

during shipment. If the pump or

components are damaged, return the

unit to the place of purchase for

replacement. Failure to do so could

result in serious injury or death.

This pump is not

designed to handle

salt water, brine, laundry discharge, or

any other application which may contain

caustic chemicals and/or foreign

materials. Pump damage could occur if

used in these applications and will void

warranty. Use for clear water application

only.

Safety Guidelines

This manual contains information that

is very important to know and

understand. This information is

provided for SAFETY and to PREVENT

EQUIPMENT PROBLEMS. To help

recognize this information, observe the

following symbols. 

Danger indicates 

an imminently

hazardous situation which, if not avoided,

will result in death or serious injury.

Warning indicates 

a potentially

hazardous situation which, if not avoided,

could result in death or serious injury.

Operating Instructions

WCP85

370100-001  4/05

in the open po si tion and tag it to

prevent unexpected application of

power. Failure to do so could result in

fatal electrical shock!

3. Release all pressure within the

system before ser vic ing any

component.

4. Drain all liquids from the system

before servicing.

5. Secure the discharge line before

starting the pump. An unsecured

discharge line will whip, possibly

causing personal injury and/or

property damage.

6. Check hoses for weak and worn

condition before each use, making

certain that all connections are

secure.

7. Periodically inspect the pump and

system com po nents. Perform

routine maintenance as required

(See Maintenance Section).

8. Provide a means of pressure relief

for pumps whose discharge line can

be shut-off or obstructed.

9. Personal Safety:

a. Wear safety glasses at all times

when working with pumps.

b. Keep work area clean,

uncluttered and properly lighted; 

Condensate Unit

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

© 2005 Wayne Water Systems

Specifications

Power supply requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V, 60 Hz, 1 phase

Motor duty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Intermittent

Liquid temperature range  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40°F to 125°F

Max. operating position  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

o

from vertical

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10” X 5” X  4-3/4”

Discharge  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8"ID

Power cord  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6'  3 conductor with ground

Reservoir  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 quart plastic

For parts, product & service information

visit www.waynepumps.com