Wayne T100S10-2 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual  

T50S10-2, T50S10-4, T51S10-4, 

T75S10-2, T75S10-4, T100S10-2

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. 

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or 

property damage! Retain instructions for future reference.

For parts, product & service information

visit 

www.waynepumps.com

REMINDER: Keep your dated proof of purchase for warranty purposes! 

Attach it to this manual or file it for safekeeping.

340601-001 5/11

© 2011 Wayne/Scott Fetzer Company.

Deep Well 

Submersible Pumps

4.  Do not pump chemicals or corrosive 

liquids. Pumping these liquids 

shortens the life of the pumps seals 

and moving parts and 

WIll void 

warranty.

5.  When installing pump, prevent 

foreign matter from falling into 

well, contaminating the water and 

damaging internal mechanical 

components.

6.  always test the water from the well 

for purity before use. Check with 

local health department for test 

procedure.

7.  Do not run the pump dry or 

damage will occur and 

WIll void 

warranty.

All wiring should 

  be performed by a 

licensed or certified electrician.

8.  For maximum safety, the unit should 

be connected to a grounded circuit 

equipped with a ground fault circuit 

interrupter (GFCI) device.

9.  Make sure the line voltage and 

frequency of electrical current 

supply agrees with the motor wiring.

10. Do not attempt repairs to the 

electric motor. all repairs to the 

motor must be completed at a 

licensed or certified electrical motor 

repair shop.

11. avoid kinking electrical cord 

and protect electrical cord from 

sharp objects, hot surfaces, 

oil and chemicals. Replace or 

repair damaged or worn cords 

immediately.

Risk of electric 

  shock!  NeveR 

connect the green wire (or green and 

yellow wire) to a live terminal! 

General Safety 

Information

CalIfOrnIa PrOPOSITIOn 65

This product 

  contains chemicals, 

including lead, known to the state of 

California to cause birth defects and 

other reproductive harm. Wash hands 

after handling.

General SafeTy 

1.  Read the instruction manual 

included with the product carefully. 

Be thoroughly familiar with the 

controls and the proper use of the 

equipment.

2.  Know the pump application, 

limitations and potential hazards.

do NoT use to 

  pump flammable 

or explosive fluids such as gasoline, 

fuel oil, kerosene, etc.  do NoT use in 

explosive atmospheres.  Pump should 

only be used with liquids compatible 

with pump component materials.  

Failure to follow this warning can result 

in personal injury and/or property 

damage.

disconnect power 

  and release all 

pressure from the system before 

attempting to install, service, relocate 

or perform any maintenance.  lock the 

power disconnect in the open position.  

Tag the power disconnect to prevent 

unexpected application of power.

3. 

Personal Safety:  

a. Wear safety glasses at all times 

when working with pumps.

b. Keep work area clean, uncluttered 

and properly lit.

c. Keep visitors at a safe distance from 

work area.

Description

this submersible pump is designed to 

supply water at the required pressure with 

high efficiency and a long service life. to 

maximize pump life, care must be taken in 

its installation and usage.

Unpacking

after unpacking the submersible pump, 

carefully inspect for any damage that 

may have occurred during transit. Check 

for loose, missing or damaged parts.

Safety Guidelines

this manual contains information 

that is very important to know 

and understand. this information 

is provided for SaFety and to 

PReVent eQUIPMent PRoBLeMS. to 

help recognize this information, observe 

the following symbols. 

danger indicates an  

  imminently 

hazardous situation which, if NoT 

avoided, WIll result in death or serious 

injury.

Warning indicates a  

  potentially 

hazardous situation which, if NoT 

avoided, Could result in death or serious 

injury.

Caution indicates a  

  potentially 

hazardous situation which, if NoT 

avoided, MAY result in minor or moderate 

injury.

Notice indicates  

  important 

information, that if NoT followed, MAY 

cause damage to equipment.

nOTe:

 Information that requires special 

attention.