Thank you for choosing our high quality camera. Before attempting to connect or operate, please read and follow these instructions. Wdr high resolution vandal dome camera operation manual m062-vdw101-003.
Contents 1. Cautions 2. Features 3. Equipment and accessories 4. Overview and function 5. Installation 6. Connection 7. Dimensions 8. Specifications 9. Osd menu • menu description • general structure • osd function description • factory default • exit 10.Communication protocol 2.
This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note - this equipment has been...
1.Cautions 4 weee (waste electrical & electronic equipment) this marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste di...
• sony vertical double-density interline ccd image sensor • 550tv lines • wdr (wide dynamic range), osd function • digital slow shutter, manual shutter • privacy zone • motion detection • ir led : 30ea, max 30m • manual pan & tilt control for easy installation - horizontal 360˚, pan 360˚, tilt 140˚ ...
• 3-axis gimbal the service video connector also provides the installer with an easy way of configuring the camera. • service video connector pan rotation horizontal rotation tilt rotation caution panning the bracket in excess of 3 rotations in one direction may cause damage to the cable. 2.Features...
1 vandal dome camera 2 surface mount 3 video output test cable 4 operation manual 5 screw(m4x10) - 4ea screw(5x30) - 4ea screw(m4x40.Sus) - 4ea l wrench - t20 6 mount guide 3. Equipment and accessories 7.
• name (led type) • name (standard) 4.Overview and function 8 osd joystick osd joystick • control function (osd joystick) left up right down.
Standard type led type mount guide 5. Installation 9 lens zoom knob lens focus knob separate led cover (sunshield cover) and adjust lens zoom / focus knob after setting the lens, assemble the led cover (sunshield cover)..
1. Installation of flush mount 2. Installation of surface mount pipe pi pe ① installation of the camera with surface case(using m4x40) ② installation of the camera with screws ③ installation of the camera with junction box ① installation of the camera on the wall ② installation of the camera on the ...
When you install the camera, please glue up the end of cable to keep it stable in order to protect the camera from the humidity problems. • dual(dc12v/ac24v) • dc12v 6.Connection 11 dc12v / ac24v regulated power supply dc12v regulated power supply video in video in bnc female video bnc female video.
Unit : mm 70 ˚ 70 ˚ standard type led type when you fix the focus around 22.0mm in f9.0-22.0mm varifocal lens, please set short distance focus approximately 3m and do not set long distance focus. Surface mount type flush mount type type a type b 7.Dimensions 12.
Signal format ntsc pal image device sony vertical double-density interline ccd image sensor scanning system 2:1 interlace h.Resolution 550tv lines scanning frequency h:15.734khz, v:59.94hz h:15.625khz, v:50hz total pixels 811(h) x 508(v) 795(h) x 596(v) effective pixels 768(h) x 494(v) 752(h) x 582(...
Menu description • the best clear image can be obtained color camera with wdr(wide dynamic range). • the camera switches lenses automatically depending on the illumination, which promotes the best possible color images during the day and black / white image at night. • the camera function can be con...
General structure setup >lens [ ┛ ] exposure [ ┛ ] white balance [ ┛ ] wdr [ ┛ ] day&night [ ┛ ] image [ ┛ ] special [ ┛ ] factory default exit lens >lens type ... Dc level ... 08 initial return exposure >shutter ... 1/60 flickerless ... Off agc ... Mid dss ... 10x initial return white balance >wb m...
Motion det >motion mode ... Off zone ... Whole level ... 03 initial return privacy >zone ... 0 mask ... Off postion ... [ ┛ ] initial return day & night >d&n mode ... Color level ... ---- dwell time ... ---- initial return image >reverse ... Normal sharpness ... 10 freeze ... Off d-zoom .. 1,00x ini...
Lens menu structure exposure menu structure 9.Osd menu 17.
White balance menu structure wdr menu structure 9.Osd menu 18.
Day & night menu structure image menu structure 9.Osd menu 19.
Special-cam title special-language 9.Osd menu 9.Osd menu 20
Special-sync special-comm adj 9.Osd menu 21.
Special-privacy special-motion det 9.Osd menu 22.
Special-display 9.Osd menu 23.
Osd function description 1.Lens : enable user to select the lens type according to equipped with camera. Set up using left, right key at each menu. - lens type ① elc : enable user to set up for board lens. ② dc : enable user to set up for dc iris lens. ③ video : enable user to set up for video iris ...
3. White balance : enable user to represent the accurate white color by controlling the r,g,b level. Setting up left, right key on each menu. - wb mode ① atw : enable user to trace the white balance automatically in the range of 2,500k~11,000k. ② push : enable user to search for white balance automa...
5. Day&night : conversion of output image color / bw depending on exterior environment enable user to set the left, right key in menu. - d&n mode ① color : enable user to fix the output image in color. ② b/w : enable user to fix the output image in b/w. ③ auto - mechanical d&n :enable user to conver...
6. Image : reverse, sharpness, freeze, d-zoom functions set up by pressing left, right key. - reverse: enable user to reverse the image. -> normal, h, v, h/v - sharpness : enable user to control the image sharpness (0~15steps). - freeze : enable user to freeze the image. - d-zoom(digital zoom) -> ma...
7. Special : setting up the cam title, language, sync, comm adj, privacy, motion det, display set up using left and right key in each manual. - cam title : enable user to choose any word in screen. (maximum 10 letter is available) ① a letter choice from the screen using menu key. ② enable user to mo...
- comm adj : enable user to set up camera id, baudrate. ① cam id : enable user to set up camera id (0~255). ② baudrate : a communication speed to communicate with external device. (2400, 4800, 9600, 19200). ③ initial : enable user to initialize the setting of menu. - privacy : privacy is the functio...
- motion det : motion detection function. ① motion mode : enable user to set up on/off ② zone : enable user to set up detection zone. -> top, bottom, center, left, right,whole ③ level : enable user to set up a sensitivity (0~5). ④ initial : enable user to initialize setting of motion det. - display ...
Pelco “d” protocol commands • most widely used commands - tele = up key - wide = down key - near = left key - far = right key - menu = menu key 10.Communication protocol 31.