Webasto 533 Manual - Setting Mode
20
GB
Setting Mode
Press the
button.
Press
again and hold it.
The last mode (heating or ventilation
) is displayed.
Press the button "Forward"
or "Reverse"
as well to change back and forth
between heating or ventilation
.
NOTE:
If the digital timer 1533 is connected to the heater via the W bus, the "parking
ventilation" function can be activated on the heater, if this function is available on
the heater. This function is only available when starting via one of the
programmed preset times.
For digital timers 1533 with an analogue connection to the heater, the "parking
ventilation" function can only be ensured by also installing a summer/winter
switch
(option). A mode change on digital timer is not required for this purpose,
as the "parking heating" or "parking ventilation" function is determined by the
switch position of the summer/winter switch.
NOTE:
Restrictions of the range of functions can occur when factory-installed heaters are
retrofitted. Please have these explained by your installation partner.
1301138F04_BA_VWU_1533.BOOK Page 20 Monday, October 1, 2012 11:23 AM