Webasto Air Top 2000 ST B Operating Instructions Manual - page 5
Set Timer Example
Set timer to turn on Friday at 6:30AM with a runtime of 60 minutes.
1.
Press the Selection button. Using the rotary dial, select Timer.
2.
Highlight the timer feature, press the Selection button. Select “edit” from the
sub-menu.
3.
Adjust and select day for Friday.
4.
Adjust and select time for 6:30AM.
5.
Adjust and select runtime for 60 minutes.
6.
Settings are saved each time the selection button is pressed.
Refer to Menu Descriptions Table for a detailed description of each menu item and its default
setting.
Definitions
Default
Mode
Mode changes the operation of the heater between
heat mode and ventilation mode. Status indicator lights
will illuminate red for heat mode and blue for
ventilation mode when the selected mode is active.
Note: Refer to Status Indicator Light description on
page 6 for additional Status Indicator explanation.
Heat Mode
Language
Language changes between English, Spanish, and
French.
English
Temp Unit
Temp Unit changes between Fahrenheit and Celsius
units of measure.
Fahrenheit
Options
Advanced level adjustments; see below.
Duration
Duration allows for the selection of continuous heater
operation or timed operation (30 minutes – 14 hours in
30 minute increments).
IMPORTANT: Timed duration is not to be mistaken for
Timer functionality. The duration times above are used
when turning the heater on manually. I.e. set the heater
duration for 8 hours before heading to bed.
Note: If timed operation is selected 10 hours is default.
Continuous
9010302E_Operating_Instructions_Air_Top_2000_ST_EN_NEW.fm Page 5 Monday, December 7, 2015 12:39 PM