Webasto Air Top 2000 ST Operating Instructions Manual

Other manuals for Air Top 2000 ST: Operating, And Servicing Instructions

Summary of Air Top 2000 ST

  • Page 1

    Dear webasto customer, thank you for choosing the webasto air top 2000 st air heater. The air top 2000 st heater is used – to heat cabins, boats, trucks, minibuses, vans and motorhomes and – to defrost vehicle windows. We presume that the principle and mode of operation of your new heater has been e...

  • Page 2

    8. In the event of long-lasting heavy smoke development, unusual combustion noises or a smell of fuel or if the heater suffers continuous fault cut-outs with error messages (flash- ing code), it must be shut down by removing the fuse and must not be reused until it has been inspected by webasto-trai...

  • Page 3: Note:

    Control element set the rotary knob on the control element to the desired temperature. Note: to prevent the hot and combustion air fan from blocking or scraping, ensure that there are no objects on or against the heater before you switch it on. Note for adr mode only: the air top 2000 st heater is s...

  • Page 4: General Infor-

    Combination timer general infor- mation the combination timer allows the heater start time to be selected for a period of up to seven days. Three cut-in times can be programmed, although only one of them may be activated. The combination timer has a temperature setpoint generator. When the ignition ...

  • Page 5: Switch On

    Switch on manual: press the button (continuous heating mode) automatic: by programming the start time switch off manual: press the button again automatic: by programming the operating period when heater unit is running: by setting the remaining time set time/date press the button for more than two s...

  • Page 6: Note For Adr Mode Only:

    If an error occurs, first check the fuse and plug connections to ensure that they are in proper condition and connected correctly. If the actions described below do not rectify the error, have the heater checked by webasto- trained personnel. Note for adr mode only: after an adr cut-out or the appli...

  • Page 7

    If the system is fitted with a combination timer, when an error occurs an error code is output on the timer's display until the heater has been rectified. The error code is output if the heater is fitted with a control element after an error has oc- curred by the switch-on indicator/error code indic...

  • Page 8

    Webasto ag postfach 80 d - 82131 stockdorf deutschland national: hotline: 01805 707 400 (€ 0,14 aus dem deutschen festnetz) hotmail: kundencenter@webasto.De http://www.Webasto.De international: http://www.Webasto.Com ident no . 901 0302 d • 04/ 10 • m odi ficatio ns and err or s exce pted • pri n te...