Webasto HL 90 Operating And Servicing Manual - Switching Off
26
GB
Switching off
Press the immediate heating button
.
Setting the time/day
Press the Time button
at the same time as the Forwards button
or
Backwards button
.
Checking the time
With the ignition off: Press the Time button
.
Programming the start of heating
Press the 1st programmed time button
at the same time as the Forwards
button
or Backwards button
until the required time appears on the dis-
play panel.
Code number 1 remains on display, the Ready indicator lights up.
The 2nd programmed time button
can be used for programming another
time. The procedure is the same as for programming the 1st programmed time.
Pressing the 1st programmed time button
or 2nd programmed time button
activates this setting and deactivates the other. The set times are retained.
HL90-T.book Page 26 Tuesday, June 4, 2013 1:20 PM