Webasto NiteCool RCC-100 Operating Instructions Manual - page 9
NiteCool TCC-100/RCC-100 parking cooler system
16
3.3 Functions
ON/OFF switch
The parking cooler system is switched on/
off by pressing button 1. LED 2 lights up
when it is switched on.
IMPORTANT!
If the blower is blocked, the system is
switched off and LED 2 is blinking. The
trouble shooting must be carried out by
trained personnel in authorised
workshops.
Blower switch
Pressing button 1 increases the blower
setting.
Pressing button 2 reduces the blower
setting.
The corresponding blower setting (1 – 8) is
shown on the indicator 3.
This function is only available when the
parking cooler system is switched on.
Cooling function ON/OFF switch
Pressing button 1 switches on the cooling
function of the parking cooler system, and
the switch-on indicator LED 2 lights up.
Pressing button 1 again switches off the
cooling function of the parking cooler
system, and the switch-on indicator LED 2
goes out.
This function is only available when the
parking cooler system is switched on.
IMPORTANT!
If a water pump is blocked, the system is
switched off and LED 2 is blinking. The
trouble shooting must be carried out by
trained personnel in authorised
workshops.
1
2
3
2
1
1
2