WebDT 362 Basic Operation Manual - page 4
WebDT 362
ENGLISH
6
Button Management
Where supported by software, many of the hard buttons on the WebDT 362 are
programmable to perform a function of the user’s choice. The exception is the Power
Button and the SAS Button. To activate the button re-assignment application, invoke the
Button Manager application, e.g., in Windows XP Embedded
.
Brightness Control
Where supported by device firmware and software, a hard button may be engaged to
manipulate the display brightness. Press the System Menu button (Button 7) on the front
of the WebDT 362. The System screen will display a Brightness control section with up
and down arrows that can be activated with the stylus.
Battery and Power Management
The WebDT 362 is equipped with an internal 2200mAh Li-Ion battery pack that is capable
of supporting approximately 1.5–2 hours of continuous operation. With the optional
internal 3760mAh battery and an external battery pack that clips (hot-pluggable)
onto the back of the device, the maximum period of continuous operation will be
approximately 3–4 hours. The period between battery recharges can be significantly
lengthened by putting the device into Standby mode through the Power Button (see
Buttons Function Table) whenever the device is not in use. Depending on the operating
software, the WebDT 362 may also be configured to enter various power-saving modes
via the Power Button or through timed entry.
7
ENGLISH
Desktop Cradle
The WebDT 362 is complemented by an optional Desktop Cradle for support, pass-
through charging, and connection to a range of USB peripherals, including keyboard and
mouse. The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter,
an Ethernet port, a VGA port (optional), and USB ports. Always seat the WebDT 362
securely onto the cradle. The cradle must be powered by the AC-DC adapter for the
Ethernet and USB ports to function. The battery packs on the WebDT 362 may be
recharged by connecting the AC-DC adapter directly to the DC-in port on the WebDT 362
or through the DC-in port on the Desktop Cradle while the WebDT 362 is docked to the
Cradle.
USING THE WebDT 362
Memory configuration
The WebDT 362 is available with 1GB or 2GB memory configurations. Storage options
currently range from: 2GB to 16GB flash memory or 32GB to 128GB SSD.
Peripherals Support
Through its USB ports, the WebDT 362 supports a wide range of USB-based peripherals.
These peripherals are applicable for software installation, applications storage, data
storage, and system software recovery and updates. The WebDT 362 is also compatible
with custom mountable cradle options. These securable and mountable cradles provide
an interface to VESA mounts and arms, and to ports that may include USB, Ethernet and
pass-through power.
Remote Management
Depending on software configuration, the WebDT 362 can be centrally managed for
asset monitoring and for software control. Please consult your device provider.