Webdyn WiFi On Board Quick Start Manual - page 5
Manual is about: WiFi Router
of
11
5
If after 2 minutes, Connection Status = Disconnected:
Check the accuracy of the modem configuration.
12. Click on Disconnect in the left-hand menu.
13. Disconnect the Ethernet lead.
14. The WiFi is activated automatically (the WLAN indicator
light illuminates after several seconds)
15. Connect your computer to the WiFi Router network
using the configuration (SSID, encryption key).
16. Open up a web browser on your computer.
17. In the address line, enter the address of the WiFi router:
http://192.168.2.12
o Check the Connection Status=Connected:
If Connection Status=Disconnected click on Refresh until
the Connection Status = Connected.
GB