WeBoost Home 3G Quick Install Manual - page 2
Find the Strongest Signal
Outside Antenna Installation
Connect Coax Cables to Connect 3G
Inside Antenna Location
Inside Antenna Installation
Connect to Power Supply
Check the bar indicator on your cell phone display and note where
the signal appears the strongest. NOTE: Cell phone bars are only
an approximation of signal strength and vary from phone to phone.
Be patient and repeat your signal check several times. NOTE:
Create a “soft” install first by testing components in your proposed
locations before securing them with hardware.
Select a location on the roof or an outside wall where the Outside
Antenna can be mounted without obstruction. After connecting the
coax cable to the antenna, run it underneath the down side of your
roof’s flashing.
Connect the coax cable from Oustside Antenna to the Connect 3G.
Connect the coax cable from Inside Antenna to the Connect 3G.
Maintain a vertical distance of at least 20 feet or a horizontal
distance of at least 50 feet between the Outside Antenna to the
Inside Antenna.
After the desired location for the Inside Antenna has been
determined use the Wall Bracket and hardware to mount to the wall.
Connect the AC Power Supply to the Connect 3G then to a surge
protected AC power strip with at least a 1000 Joule rating. If your
Connect 3G is working correctly, the lights will be green.
1
2
3
4
5
6
Power Supply
Surge Protected
Power Strip
Inside Antenna
(sideview)
Wall Bracket
Drywall
Inside
Antenna
Connect 3G
Outside
Antenna
Omni Outside
Antenna
Directional Outside
Antenna
50 feet - horizontal distance
or 20 feet vertical distance