WeBoost Home 4G User Manual - ______
8
CELL PHONE SIGNAL BOOSTER
HOME 4G
______
Test System: Lights
Fix Any Red Light Problems (red indicates oscillation)
• If you are happy with coverage, red lights don’t have to be resolved.
•
Solid Red
= Band has shut off
•
Blinking Green/Red
= Band has reduced gain
Each light corresponds to a frequency band.
No Lights
Booster does not have power. Un-plug and securely re-plug in power supply.
Note: Lights may be dim.
IMPORTANT:
To get an accurate reading of the lights, unplug and re-plug
the power supply from the Booster.
Band 4
Band 5
Band 2
Band 12/13/17
!
Skinny
Fat
1. Verify Outside Antenna faces away from the Inside
Antenna. See 8.2. Un-plug and re-plug in power
supply.
2. Verify the Inside Antenna is at least 18” from the
Booster and pointed away from the Booster. Un-
plug and re-plug in power supply.
3. Tighten all cable connections. You may want to
undo and redo the connection completely. Un-
plug and re-plug in power supply.
4. BEST: Increase the distance (horizontally or
vertically) between the Outside and Inside
antenna. Add cable if needed. Un-plug and re-
plug in power supply.
OUTSIDE ANTENNA:
The skinny side
should always face outside, towards the
cell tower.
8.2