1. DL manuals
  2. Weed Eater
  3. Blower
  4. 545117528
  5. Instruction Manual

Weed Eater 545117528 Instruction Manual

Manual is about: Weed Eater Blower Instruction Manual

Summary of 545117528

  • Page 1

    Ebv vs r trademark warning: read and follow all safety rules and operating instructions before using this product. Failure to do so can result in serious injury. Advertencia: lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. El no hacerlo puede resultar en le...

  • Page 2: Important Warnings And

    2 safety rules important warnings and safety instructions warning: when using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and serious injury. The warnings and safety instructions in this manual must be followed to redu...

  • Page 3: Warning:

    3 let only one way. If plug does not fit fully into the wall outlet, reverse the plug. If it still does not fit, contact a qualified electri- cian to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. S to reduce the risk o...

  • Page 4

    4 s have all maintenance other than the recommended procedures described in the instruction manual performed by your authorized service dealer. S always see your authorized service dealer to replace a damaged impeller. Parts that are chipped, cracked, broken, or damaged in any other way can fly apar...

  • Page 5: Save These Instructions

    5 save these instructions assembly warning: stop the unit and dis- connect from the power source before opening the inlet cover or attempting to in- sert or remove the inlet restrictor, blower tube, or vacuum tubes. The motor must be stopped and the impeller blades no longer turning to avoid serious...

  • Page 6

    6 retaining post vacuum assist handle upper vacuum tube hook 4. To attach the lower vacuum tube to the upper vacuum tube, first align the arrows on the two tubes. Then, press the two tubes together until the lower tube is securely seated in the upper tube (about 3 inches). Align arrows on upper and ...

  • Page 7

    7 note: if you are unable to locate the inlet restrictor, the unit will still operate. This restrictor improves the blower function. 4. Remove the collection bag. 5. Close the inlet cover and make sure it is latched closed. 6. Re-install the blower tube. Refer to at- taching the blower tube for inst...

  • Page 8

    8 using your unit know your electric blower read this instruction manual and safety rules before operating your unit. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Variable speed contro...

  • Page 9

    9 note: the variable speed control will not function with the switch in the high (high speed) position. With the switch in the var (variable speed) position, the motor speed can be increased by moving the control toward the + position or decreased by moving the control toward the -- position. Variab...

  • Page 10

    10 s on/off switch -- ensure switch func- tions properly by moving the switch to the off position. Make sure motor stops; then restart motor and continue. S inlet cover -- discontinue use of unit if inlet cover fails to latch properly or if it is damaged in any way. After each use inspect and clean ...

  • Page 11

    11 troubleshooting table symptom cause remedy unit fails to operate. 1. Switch in the off position. 2. Extension cord discon-- nected. 3. Circuit breaker tripped, or fuse blown. 4. Mechanical failure 1. Slide switch to high or var position. 2. Reconnect extension cord. 3. Reset circuit breaker or fu...