1. DL manuals
  2. Weed Eater
  3. Trimmer
  4. 545186762
  5. Instruction Manual

Weed Eater 545186762 Instruction Manual

Manual is about: Weed Eater Trimmer Instruction Manual

Summary of 545186762

  • Page 1

    Rte112c r trademark instruction manual manual de instrucciones manuel d’instructions e n gl is h esp aÑ o l f ranÇa is please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l’outil au détaillant. 1-800-554-6723 www.Weedeater.Com weed e...

  • Page 2

    2 safety rules warning: when using electric gar- dening appliances, basic safety precautions must always be followed to reduce the risk of fire, electric shock, and serious injury. Read and follow all instructions. Safety information on the unit this power unit can be dangerous! Operator is responsi...

  • Page 3

    3 s do not abuse cord. Never carry the unit by the extension cord or yank extension cord to disconnect unit. S use cord retainer to prevent disconnection of extension cord from unit and possible damage to the unit due to plug movement (see attach the extension cord to your trimmer in the operation s...

  • Page 4

    4 assembly warning: if received assembled, review all assembly steps to ensure your unit is properly assembled and all fasteners are secure. Tube assembly wires upper locking sleeve assembly lower locking sleeve assembly 1. Align upper tube groove with triangle on lower locking sleeve assembly. Push...

  • Page 5

    5 3. Insert the shield onto the motor housing. Ensure the cutting head remains free to rotate and the line is not caught between the shield and the motor housing. 4. Twist the shield as illustrated until it snaps securely into place. Make sure the shield is assembled to the unit as shown in the illu...

  • Page 6

    6 operating instructions use only a voltage supply as specified on your unit. Select an extension cord extension cord gauge chart length of cord gauge 25 ft. (7.5 m) 50 ft. (15 m) 100 ft. (30 m) 18 gauge 16 gauge 16 gauge extension cords are available for this unit. Attach the extension cord to your...

  • Page 7

    7 scalping mowing your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and dam- age the tool. Mowing sweeping the fanning action of the rota...

  • Page 8

    8 8. Insert the line into the exit hole in the hub as shown in the illustration. 9. Align the notch with the line exit hole. 10. Push the spool into the hub until it snaps into place. 11. Pull on the line extending outside the hub to release it from the notch; otherwise, the unit will not function p...

  • Page 9

    9 trouble cause remedy trimmer head stops under a load or does not turn when switch is pressed. 1. Allow tip of line to do the cutting. 2. Contact your authorized service dealer. 3. Check breaker box. 4. Remove debris. Line does not advance or breaks while cutting. 1. Check line routing. 2. Rewind l...

  • Page 10

    10 limited warranty weed eater, a division of husqvarna out- door products inc., warrants to the original con- sumer purchaser that each new weed eater brand electric or cordless product is free from defects in material and workmanship and agrees to repair or replace under this warranty any defectiv...