Weed Eater 952711849 Instruction Manual

Summary of 952711849

  • Page 1

    Instruction manual manual de instrucciones manuel d’instructions please do not return product to retailer. Por favor, no devuelva el producto al lugar de compra. Veuillez ne pas retourner le produit au détaillant. 1--800--554--6723 www.Weedeater.Com register your product online at: registre su produ...

  • Page 2: Important Warnings And

    2 safety rules important warnings and safety instructions warning: when using electric gardening appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and serious injury. The warnings and safety instructions in this manual must be followed to redu...

  • Page 3: Warning:

    3 gauge. The smaller the gauge number, the heavier the cord. ( note: the correct size to be used depending on the cord length is shown in this manual. See se- lect an extension cord in the as- sembly section). S do not use multiple cords. S keep the extension cord clear of operator and obstacles at ...

  • Page 4: Save These Instructions

    4 s never douse the unit with water or other liquids or squirt with a water hose. Clean the unit using a damp cloth. Wipe off with a clean dry cloth. See mainte- nance . S check air intake openings and tubes frequently, always with the unit stopped and power source disconnected. Keep vents and tubes...

  • Page 5

    5 assembly warning: stop the unit and dis- connect from the power source before opening the vacuum inlet cover. The mo- tor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades. Warning: if received assembled, ensure your unit is properly assembl...

  • Page 6

    6 using your unit know your electric blower read this instruction manual and safety rules before operating your unit. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Top handle air vents ...

  • Page 7

    7 maintenance warning: disconnect power source before performing maintenance. General recommendations the warranty on this unit does not cover items that have been subjected to opera- tor abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in t...

  • Page 8

    8 troubleshooting table symptom cause remedy unit fails to operate. 1. Switch in the off position. 2. Extension cord discon-- nected. 3. Circuit breaker tripped, or fuse blown. 4. Mechanical failure 1. Slide switch to on position. 2. Reconnect extension cord. 3. Reset circuit breaker or fuse. 4. Con...