Weewell WTP401 User Manual - Cleaning Instructions
WTP401 USER MANUAL
I
5
How to change the measuring scale (only for switchable type)
To switch the display between C and F, turn the unit on. Press and hold the ON/OFF button for
2 seconds, the display will show another scale.
Cleaning instructions
1.
Don’t drop or throw the unit. This will lead to breakage and the unit gets
damaged.
2.
Clean the nipple thermometer by wiping it with soap and warm
water or rubbing alcohol (70% isopropyl alcohol), wipe dry with
soft cloth.
3.
Don’t put the unit into boiling water. This will damage the ther-
mometer and will void the warranty.
4.
Do not wash the unit with any thinner or chemical solvent.
5.
Please store thermometer in the condition of temperature (-25~55) °C/
(-13~131)°F, relative humidity (≤95%).
6.
Calibration cycle of the digital thermometer is two years; dispose
the unit according to your state’s regulations.
Specifications
The standard adopted is EN 12470-3 Clinical thermometers -- Part 3
Working environment: (5~40) °C/(10~104) °F, ≤85%RH
Display range:
32.0°C~42.0°C/89.6°F~107.6°F (Display L°C/L°F when the
temperature is below 32°C/90.0°F,Display H°C/H°F when
the temperature is above 42.0°C/107.6°C)
Accuracy:
±0.1°C/0.2°F (35.5°C~ 42.0°C/ 95.9°F~107.6°F)
±0.2°C/0.4°F (32.0°C~ 35.5°C/ 89.6°F~95.9°F)
Display mode:
LCD
Power consumption:
0.15mw in operating state.
Battery:
One 1.5V button battery (cannot be replaced)
Battery life:
About 100 hours under continuous operation.
Dimensions:
62×45×44mm
Net weight:
About 12 grams
0197