WEG DeviceNet CFW500 Installation, Configuration And Operations Manual - 3 Contents of The Package
Digital I/Os Plug-in Module
E
ng
lis
h
6 | CFW500
3 CONTENTS OF THE PACKAGE
When receiving the product, check if this package
contains:
Accessory in anti-static packaging.
Installation, configuration and operation guide.
4 ACCESSORY INSTALLATION
The accessory is easily installed or replaced. For correct
installation of the accessory execute the following steps:
Step 1: With the inverter de-energized, remove the front
cover of the Inverter (
figure A.1 (a)
).
Step 2: Remove the accessory (connected plug-in
module) if any, as in
figure A.1 (a)
.
Step 3: Fit and press the accessory to be installed as
indicated in
figure A.1 (b)
and then assemble the front
cover of the inverter.
Step 4: Power up the inverter and check if parameter
P0027 shows value 2 (P0027=2). If this information is not
true, check if the module used is actually the CFW500-
IOD and repeat steps 1-4.