WeGo ACTIVE User Manual
MODE/RESET BUTTON
• Operating Mode: Scrolls through display modes.
• Press & Hold: Resets Activity Tracker data.
• Programming Mode: Decreases current value.
SET BUTTON
• Operating Mode: Press & Hold to enter the Programming Sequence.
• Programming Mode: Accepts the information being adjusted and
advances to the next setting.
+ BUTTON
• Programming Mode: Increases current value
2- REMOVING BATTERY INSULATOR TAB
3- BUTTONS AND THEIR FUNCTIONS
1- GETTING STARTED
Congratulations on your purchase of a WeGo™
ACTIVE
.
The WeGo™
ACTIVE features highly advanced sensor technologies that
accurately measure your body movements when worn from multiple
locations on the body and in multiple orientations. In addition, the
built-in audio jack technology allows you to easily upload your data
to any compatible smartphone or tablet through the Join WeGo
™
smartphone application. Please visit www.JoinWeGo.com/compatibility
for a complete list of compatible devices.
Downloading the Join WeGo
™
Application:
In addition to the Activity Tracker you have purchased, you will also need
to download the Join WeGo
™
application for FREE on to your compatible
smartphone or tablet and create a user account.
For a complete tutorial regarding downloading, installing, and using the
Join WeGo
™
application, please visit: www.JoinWeGo.com/support
CUSTOMER SUPPORT
If you have questions, comments or need assistance with your device
please feel free to contact Customer Support by calling 1-866-694-4575.
To activate your Activity Tracker after purchase, you must remove the
battery insulator tab inside the battery compartment.
1. Locate the tab on of the Activity Tracker.
2. Firmly grasp the tab and pull away from the Activity Tracker until com-
pletely removed from the unit.
3. The unit will now be activated and the screen will be on.
Fold 2
Fold 3
Fold 3
4- PROGRAMMING THE ACTIVITY TRACKER
5- OPERATING THE ACTIVITY TRACKER
The Activity Tracker automatically begins capturing data once
movement occurs. There are no Start or Stop buttons to push.
Scroll through display modes by PRESSING the MODE/RESET
button on the front of the unit.
TO CLEAR ALL CURRENT ACTIVITY TRACKER DATA:
1. PRESS & HOLD the MODE/RESET button on the front of the unit.
2. Continue holding as the display reads “RESET”.
3. When Activity Tracker data reads zeros (O), RELEASE the MODE/
RESET button.
NOTE: Your personal profi le settings will be saved.
IMPORTANT: Make sure you have uploaded your data to JoinWeGo™ before
resetting the unit. Your stored data will be reset to 0.
ACTIVE
WWW.JoinWeGo.com
Made in China. WeGo™ is a trademark of EB Sport Group, Hazleton, PA
18202. Distributed in the United Kingdom by EB Brands (UK), Worcester
WR4 9FA. MapMyFitness is a trademark of MapMyFitness, Inc. iPhone and
iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
Android and Google Play are trademarks of Google Inc.
All Rights Reserved. ©2014 Designed and engineered by EB Labs
Caution:
not a medical device. Should not be used to diagnose or treat
any medical condition. Consult your doctor for prevention, diagnosis and
treatment. See the user guide for further guidance.
WO1591ISO1SPO
USER GUIDE
/INSTRUCTION MANUAL
ALL DAY ACTIVITY TRACKER
SYNC
DISTANCE
CALORIES
STEPS
ACTIVITY TIMER
INCREASE VALUE OF
CURRENT SETTING
HOLD TO ENTER SETTINGS
PRESS TO CONFIRM
CURRENT SETTING &
ADVANCE TO THE NEXT SCREEN
DECREASE VALUE OF
CURRENT SETTING
PRESS MODE BUTTON TO
CHANGE SCREENS
NOTE: The Activity Timer will automatically record your time moving and does not
need to be started or stopped.
1. Enter the Programming Sequence by PRESSING & HOLDING the SET
button on the back of the unit for approximately 3 seconds.
2. Adjust the value of each of the settings shown by PRESSING the + button
to increase or MODE button to decrease. Press SET to confi rm.
3. When prompted for stride length, this activity tracker has an automatic
stride length calculator that sets your length based on your height. PRESS
the SET button to accept this value or you can adjust your Stride Length
(see “Determining Stride Length” on the back page) by PRESSING the +
or MODE buttons.
4. SAVED will be displayed on the fi nal press of the SET button. The unit is
now programmed and ready for use!
HOLD SET FOR
3 SECONDS
SAVE
12/24 HOUR FORMAT
STRIDE LENGTH
HOUR
HEIGHT
MINUTE
PREFERRED UNIT
OF MEASURE
MONTH
WEIGHT
DAY
YEAR
PRESS
+
OR MODE TO ADJUST VALUE, PRESS SET TO ADVANCE TO CONFIRM
MODE/RESET
SET
+
WO1591IS01SPO
16” × 8”
9.23.14
Richi