Weidamark SRL-6079S User Manual - 2. Function

Manual is about: LED PAR

Page of 10

Download

Print this page

Bookmark us

2. Function

#1 #2 #3 #4

#5 #6

#10

DMX Function

DMX Setting: Set Switch #1~#9 to “1” (ON) or

“0”(OFF) to your need. For the detail, please refer to

DMX Setting Chart.

Master/Slave

x x x x

x x x

Auto for

Fade

Auto for

No Fade

Switch#4~#6

correspond for

the Speed.

Set

Switch#4~#6 to

“1” (ON)

“0”(OFF)

to your need.

For the detail,

please refer to

Speed

Selection Chart.

Master

Sound

Active

Switch #1~#3

correspond for the

Program Selection.

Set Switch #1~#3

to “1” (ON)

“0”(OFF)

to your need.

For the detail,

please refer to

Program Selection

Chart..

x x x x x 1 0

Function Explanation:

a. Sound

Active:

1. No fade

2. The running of the Built-in Program is triggered by sound. ( one

trigger, one step)

3. Every Program has different built-in sound-activated program.

Select the program by Switch #1~#3.

b. Master/Slave:

Set one lamp to AUTO mode with the others lamp to DMX mode.

Thereafter, the master and the slave run synchronically.

c. DMX mode:

1. Set the DMX value (1~512 ) based on the binary system for

Switch #1, #2, #3,#4, #5, #6, #7, #8, #9.

2. Plug in the DMX 3-Pin XLR signal cable.

« ‹ Prev 2 3 4 5 6 7 8 Next › »

Summary of SRL-6079S

Page 1
Srl-6079s led par user manual.
Page 2: Table of Content
Table of content introduction---------------------------------------------------------------3 feature---------------------------------------------------------------------------------------------3 mode------------------------------------------------------------------------------------------------3 co...
Page 3: Introduction
Introduction thank you for purchasing srl-6079s led par. This product is featured with balanced mix of rgb led, and operated via dmx, auto, sound active and master/slave. It will provide you splendid vision enjoyment. Z features ＊ adjust the color temperature to the best by mixing the rgb led ＊ line...
Page 4: Operation Instruction
Operation instruction back panel 1. Explanation for dipswitch on off on 1 2 3 4 5 6 7 8 9 10 a. Dipswitch: #1, #2, #3,#4, #5, #6, #7, #8, #9, #10 b. On=1, off=0 c. The switch does not function, that is on/off does not matter = x d. As the above figure, #1 =on =1, the rest #2, #3,#4, #5, #6, #7, #8, ...
Page 5: 2. Function
2. Function #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 dmx function dmx setting: set switch #1~#9 to “1” (on) or “0”(off) to your need. For the detail, please refer to dmx setting chart. 1 master/slave x x x x x x x x x 1 auto for fade 1 x 0 0 auto for no fade switch#4~#6 correspond for the speed. Set switch#4~...
Page 6
D. Example for dmx address setting 1 2 4 8 16 32 64 128 256 on off on on 1 2 3 4 5 6 7 8 9 1. Switch #1 value=0, #2 value =2, #3 value =4,#4 value =0, #5 value =0, #6 value =0, #7 value =0, #8 value =0, #9 value =0 2. The address value = 0+2+4+0+0+0+0+0+0=6 3. Please refer to the dmx address chart a...
Page 7
G. Dmx channel function channel value function channel1 0~255 set to 0~255 to your need red led brightness is 0%~100% of the total brightness. Channel2 0~255 set to 0~255 to your need green led brightness is 0%~100% of the total brightness. Channel3 0~255 set to 0~255 to your need blue led brightnes...
Page 8: Maintenance And Cleansing
Maintenance and cleansing a. Troubleshooting trouble cause remedy no power supply check the mains power switch and the cables. Fixtures do not respond. Fuse burned disconnect the power and replace the fuse with the same specification. If the fuse is burned again, the problem should be cause by the c...
Page 9: Specification
Specification voltage input: ac120v/240v fuse: 2a/125v 1a/250v power:11w light source: red, 50pieces, size ф10, power 0.044w green, 33 pieces, sizeф10, power0.064w blue, 24pieces, sizeф10, power0.064w dimming:0~100% dmx channel: 5 dmx channels rgb mixed balance: 255 levels size: ф225×340 weight: 2.5...
Page 10
Dmx address quick reference chart dip switch position dmx dip switch set #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=off #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=on #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 x=off or on #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 35...