1. DL manuals
  2. Weider
  3. Fitness Equipment
  4. BODY WORKS PRO WEFMBE14010
  5. User Manual

Weider BODY WORKS PRO WEFMBE14010 User Manual

Summary of BODY WORKS PRO WEFMBE14010

  • Page 1

    Questions? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: 08457 089 009 or write: icon health & fitness, ltd. Unit 4 revie road industrial estate revie road beeston leeds ls11 8jg uk csu...

  • Page 2

    11 2 33 34 34 18 18 13 13 5 16 16 15 15 32 32 45 45 33 35 36 46 20 32 43 43 42 35 10 10 9 8 11 7 35 35 32 6 36 48 11 31 47 19 11 4 19 35 32 32 44 11 3 26 1 41 39 39 12 12 21 22 23 25 12 22 39 49 30 29 28 27 24 26 25 12 17 14 38 39 40 37 21 22 23 37 37 38 40 37 14 2 40 38 21 23 39 41 39 41 39 39 41 4...

  • Page 3

    3 10 1 1 seat 2 1 seat bracket 3 1 rail 4 1 stabiliser 5 1 upper bar 6 1 support leg 7 1 adjustment foot 8 1 adjustment leg 9 1 adjustment bracket 10 2 adjustment bushing 11 4 60mm round outer cap 12 10 m8 nylon locknut 13 2 foam pad 14 2 25mm x 50mm inner cap 15 2 large pulley 16 2 pulley housing 1...

  • Page 4

    4 9 adjusting the incline the incline of the weight training system can be adjust- ed to change the resistance level of your workout. To adjust the incline, lift the rail (3) until the knob on the adjustment bracket (9) can be pulled from the adjustment hole in the adjustment leg (8). Raise or lower...

  • Page 5

    8 6. Remove the large pulley (15) from one of the pulley housings (16). Wrap one end of the cord (30) around the large pulley (15). Reattach the large pulley inside the pulley housing (16) with the m10 x 30mm bolt (45) and the m10 nylon locknut (32). Note: do not overtighten the bolt; the pulley sho...

  • Page 6

    Before beginning assembly, carefully read the following information and instructions: • place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • tighten all parts as you assemble them, unless instructed to do otherwise...