Weider PRO 120 User Manual

Other manuals for PRO 120: User Manual
Manual is about: User Manual

Summary of PRO 120

  • Page 1

    Part no. 197220 r0803a printed in china © 2003 icon health & fitness, inc. Model no. Weevbe70230 serial no. Caution read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. User's manual serial number decal (under bench) ordering repl...

  • Page 2

    2 table of contents important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 3

    Adjusting the pivot leg to change the position of the pivot leg (2), first remove the “l” pin (15). Align the other hole in the pivot leg with the corresponding hole in the frame (1). Re-insert the “l” pin. Adjusting the level of the bench to change the level of the bench (12), first remove both loc...

  • Page 4

    1. Make sure that you have read the information on the previous page. Press the 38mm square inner cap (16) into the end of the frame (1). Press two 50mm round outer caps (9) onto the adjustment leg (3). Press the 38mm x 50mm inner cap (8) into the adjustment leg. Align the indicated holes in the fra...