Weider PRO 800 User Manual - Important Precautions

Other manuals for PRO 800: User Manual
Manual is about: Weight Bench

Summary of PRO 800

  • Page 1

    ® caution read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial number decal (under seat) sears, roebuck and co., hoffman estates, il 60179 model no. 831.150742 serial no. Write the serial number in the space above for futur...

  • Page 2: Warning Decal Placement

    Warning decal placement 2 warning decal placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 3: Important Precautions

    Important precautions warning: before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. Sears assumes no responsibility for personal injury or p...

  • Page 4: Before You Begin

    4 backrest weight rests upright adjustment knob seat adjustment tubes leg lever weight tube curl pad thank you for selecting the weider ® pro 800 weight bench. The versatile weider ® pro 800 is designed to be used with your own weight set (not included) to develop every major muscle group of the bod...

  • Page 5: Part Identification Chart

    5 this chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part. Important: some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has...

  • Page 6: Assembly

    6 2a 2b 3 44 44 44 44 24 24 24 24 24 24 19 19 45 19 19 warning decal warning decal 43 43 43 43 45 assembly before beginning assembly, carefully read the following information and instructions: • assembly requires two people. • place all parts in a cleared area and remove the packing materials. Do no...

  • Page 7: Warning:

    ® 3 19 19 20 35 35 20 19 19 20 35 35 43 3 43 20 warning decal weider ® pro 800 decal 7 30 30 7 1 1 5. Attach the front leg (8) to the frame (2) with two m10 x 65mm bolts (18), two m10 washers (24), and two m10 nylon locknuts (19). 6. Tap three 45mm square inner caps (21) into the ends of the leg lev...

  • Page 8

    8 9. Lubricate the m10 x 178mm bolt (17). Attach the backrest (6) to the frame (2) with the bolt, two m10 washers (24), and an m10 nylon locknut (19). Secure the backrest (6) by sliding the adjustment pin (32) through one of the three sets of holes in the adjustment tubes and the indicated hole in t...

  • Page 9

    15 27 26 11 11. Attach the curl pad (27) to the curl post (26) with two m6 x 16mm screws (15). 12. Slide the curl post (26) into the front leg (8). Align one of the adjustment holes in the curl post with the adjustment hole in the front leg. Tighten the m10 x 48mm adjustment knob (33) into the adjus...

  • Page 10: Warning:

    10 the weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See exercise guidelines on page 12 for important exercise information and refer to the accompanying exercise guide to see the correct form for several exe...

  • Page 11: Warning:

    11 26 21 33 8 attaching the curl post for some exercises, the curl post (26) must be attached to the weight bench. Slide the curl post (26) into the front leg (8). Align one of the adjustment holes in the curl post with the adjustment hole in the front leg. Tighten the m10 x 48mm adjustment knob (33...

  • Page 12: Exercise Guidelines

    12 the four basic types of workouts muscle building to increase the size and strength of your muscles, push them close to their maximum capacity. Your muscles will continually adapt and grow as you pro- gressively increase the intensity of your exercise. You can adjust the intensity level of an indi...

  • Page 13

    13 rest for a short period of time after each set. The ideal resting periods are: • rest for three minutes after each set for a muscle building workout. • rest for one minute after each set for a toning work- out. • rest for 30 seconds after each set for a weight loss workout. Plan to spend the firs...

  • Page 14

    14 key no. Qty. Description 1 2 upright 2 1 frame 3 1 crossbar 4 1 leg lever 5 1 right backrest tube 6 1 backrest 7 2 upright base 8 1 front leg 9 6 3/4” round inner cap 10 3 pad tube 11 1 seat 12 4 1” square inner cap 13 1 m8 nylon locknut 14 1 pin clip 15 6 m6 x 16mm screw 16 4 m6 x 38mm screw 17 ...

  • Page 15

    1 7 35 19 30 28 31 11 22 21 21 4 21 22 23 9 10 10 9 9 22 22 9 29 10 9 9 22 34 34 39 38 37 38 13 33 8 21 19 40 18 24 24 20 35 19 41 14 20 19 43 44 19 27 15 26 1 7 19 35 30 31 28 34 34 20 35 20 19 43 19 40 3 6 12 12 5 25 16 16 25 25 36 42 16 46 45 45 34 34 46 24 44 24 32 2 19 19 15 17 19 19 19 24 34 3...

  • Page 16: Full 90 Day Warranty

    Full 90 day warranty part no. 176249 r0601a printed in china © 2001 sears, roebuck and co. The model number and serial number of your weider ® pro 800 are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal. All replacement parts are availabl...