Weider Viper 2000 Manual

Other manuals for Viper 2000: Manual, Manual, Manual, Manual
Manual is about: Spanish Manual

Summary of Viper 2000

  • Page 1

    Questions? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete satisfaction through our customer service department. Please call: 0345-089009 or write: icon fitness l...

  • Page 2: Table Of Contents

    2 table of contents important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 3: Before You Begin

    3 before you begin assembled dimensions: height: 75 1/2 in. Width: 55 3/4 in. Length: 72 in. Foot plate low pulley station high pulley station lat bar leg lever arms stepper weight stack backrest resistance cylinders vkr arms weight pin thank you for selecting the versatile weider ® viper 2000. The ...

  • Page 4: Assembly

    Assembly 4 1 2 88 4 82 bracket low side 14 88 5 3 8 3 11 86 8 11 3 20 4 1 27 1 before beginning assembly, carefully read the following information and instructions: • place all parts of the viper 2000 in a cleared area and remove the packing materials; do not dispose of the packing materials until a...

  • Page 5

    3. Press the 1 1/4” inner cap (57) into the front upright (42). Attach the 1” plastic stop (64) to the centre hole in the stop bracket (63) with a 5/16” x 1 1/2” bolt (24) and 5/16” nylon locknut (3). Attach the stop bracket (63) to the front upright (42) with a 5/16” x 2” bolt (61), 5/16” flat wash...

  • Page 6

    6 5. Press two 1 1/2” bushings (93) into the left pedal (90); press two 1 1/2” bushings (93) into the right pedal (89). Attach a pedal cover (92) to each pedal with a 1/2” tap screw (6). Lubricate the pedal axles on the rear upright (82). Slide the right and left pedals (89, 90) onto the right and l...

  • Page 7

    7 9 10 11 79 pin groove welded pin 80 72 upper ends of weight guides have holes 25 25 72 67 74 73 3 44 68 67 49 49 42 69 7 18 44 lubricate 52 9. Press the weight tube endcap (79) into the indi- cated end of the weight tube (80). Insert the weight tube (80) into the stack of weights (25). Slide the t...

  • Page 8

    8 12. Press two 1 3/4” inner caps (44) into each of the arms (46). Apply lubricant to the lower axles on the arm frame (52). Slide an arm (46) onto one of the axles. Hold two 1” retainers (54) and a 1” round cover cap (55) against the lower end of the axle. The teeth on the retainers must bend towar...

  • Page 9

    9 15. Attach the wide swivel bracket (71) to the indi- cated bracket on the top frame (67) with a 5/16” x 3 1/4” bolt (35) and 5/16” nylon locknut (3). Do not overtighten the nylon locknut; the wide swivel bracket must be able to swivel freely. 16. If the parts shown at the right have not been pre- ...

  • Page 10

    10 12 3 6 9 19. Remove the 3/8” nylon locknut (21), 3/8” x 1 3/4” bolt (48), and 4 1/2” pulley (77) from one end of the “i” plates (78). Route the long cable (66) under the pulley and reattach the pulley to the “i” plates with the bolt and nylon locknut. Refer to the inset drawing. (note: the wide s...

  • Page 11

    11 23. Hold the indicated end of the short cable (23) under the 3 1/2” pulley (15) on the front upright (42). Attach the 5/16” x 3 1/2” bolt (87), two 5/16” flat washers (8), the 1” metal spacer (22), and a 5/16” nylon locknut (3) to the front upright as shown. Be sure that the short cable is betwee...

  • Page 12

    12 26. Press a 1 1/2” inner cap (32) into the seat frame (36). Insert a 1/4” x 2” carriage bolt (38) into the centre of each seat plate (37). Attach the seat plates to the seat (13) with four 1/4” x 3/4” screws (18). Insert the two 1/4” x 2” carriage bolts (38) into the seat frame (36). Make sure th...

  • Page 13

    13 30. Attach a vkr armrest (99) to the right vkr arm (101) with two 1/4” x 2” screws (102) and 1/4” flat washers (10). Attach a vkr armrest (99) to the left vkr arm (100) in the same manner. 31. Insert a 7” handle (47) into the right vkr arm (101). Attach the handle with a 5/16” x 2” bolt (61), two...

  • Page 14: Notes

    14 notes.

  • Page 15: Adjustment

    15 adjustment the instructions below describe how each part of the weight system can be adjusted. Important: when attaching the lat bar or nylon strap, make sure that the attachments are in the correct starting position for the exercise to be performed. If there is any slack in the cable or chain as...

  • Page 16

    16 attaching the leg lever to the low pulley station to use the leg lever (29), the seat must be attached to the front upright (see attaching and remov- ing the seat on page 15). Attach the chain (84) between the 5/16” x 2” eyebolt (62) on the leg lever (29) and the short cable (23) with two cable c...

  • Page 17

    17 weight resistance chart weight press arm butterfly arm leg lever high pulley low pulley plates (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) 1 29 26 18 16 18 2 4 8 39 32 30 32 3 69 50 4 5 4 3 4 5 483 64 58 56 58 5 107 80 71 68 71 6 129 96 8480 84 7 145 112 98 93 98 8 163 130 110 105 110 9 181 149 125 117 12...

  • Page 18

    18 trouble-shooting and maintenance inspect and tighten all parts each time you use the weight system. Replace any worn parts immediately. The weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. Tightening the cables woven cable, the type of cable us...

  • Page 19: Cable Diagram

    19 a b short cable (23) low pulley station d—weight tube c long cable (66) high pulley station 1 2 3 4 5 7 8—top frame 6 cable diagram the cable diagram below shows the proper routing of the short cable (23) and the long cable (66). Use the diagram to make sure that the two cables are assembled corr...

  • Page 20: Ordering Replacement Parts

    Ordering replacement parts if you encounter any difficulties or problems with this product, contact the icon fitness lifestyle ltd. Office, or write: icon fitness lifestyle ltd. Greenwich house 223 north street sheepscar west yorkshire leeds ls7 2aa tel: country code: 0345-089009 fax: 113-241-1120 t...

  • Page 21: Chart From The Manual!

    This chart is provided to help you identify the small parts used in assembly. Important: some parts may have been pre-assembled for shipping purposes; if you cannot find a part in the parts bags, check to see if it has been pre-assembled. Remove this part identification chart from the manual! Wesy60...

  • Page 22

    5/16" x 2" bolt (61)–3 5/16" nylon locknut (3)–30 1/4" flat washer (10)–10 5/16" flat washer (8)–23 3/8" flat washer (9)–5 5/16" jam nut (2)–2 1/4" nylon locknut (7)—6 3/8" nylon locknut (21)–12 5/16" x 2 1/2" carriage bolt (1)–3 1/4" x 3/4" screw (18)–8 5/16" x 2 1/4" bolt (33)–5 1/4" x 2" carriage...

  • Page 23

    1/2" x 3/8" spacer (51)—2 1" retainer (54)–6 1" plastic stop (64)–1 1/2" x 1/2" spacer (65)—2 5/8" retainer (95)–2 1/2" x 3/4" spacer (73)—2 5/16" x 2 3/4" carriage bolt (14)–3 3/8" x 2 3/4" bolt (70)–3 1" metal spacer (22)–1 3/8" x 3 1/2" bolt (16)–1 5/16" x 3" bolt (17)–1 5/16" x 3 1/4" bolt (35)–...

  • Page 24

    1" round inner cap (49)–8 1" round cover cap (55)–4 3/4" round inner cap (34)–4 5/8" spacer (97)–2 5/8" round cover cap (96)–2 5/16" x 2" eyebolt (62)—1 1 1/4" inner cap (57)—1 1 1/2" inner cap (32)—4 1 3/4" inner cap (44)–6 2" inner cap (27)–3 2" outer cap (88)–2.

  • Page 25: Drawing From The Manual!

    Remove this part list/exploded drawing from the manual! 8 1.

  • Page 26

    Part list—model no. Wesy60400 r0997a note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user’s manual for information about ordering replacement parts. Key no.Qty. Description 1 3 5/16” x 2 1/2” carriage bolt 2 2 5/16” jam nut 3...

  • Page 27

    97 95 96 91 55 54 93 93 54 55 89 90 92 43 10 98 11 3 100 101 99 99 47 49 47 10 102 8 3 49 32 8 61 102 10 61 8 49 32 8 3 6 6 49 96 95 3 77 77 78 78 21 82 88 5 4 19 11 8 1 21 20 3 27 15 59 48 34 34 50 32 31 50 34 29 3 33 7 30 10 7 28 34 32 36 39 13 38 37 18 40 14 23 87 8 22 16 15 3 3 8 3 21 9 26 88 42...