1 airflame excel mk.3 af 16nv 9500298 ac 16nv 9500296 af 16xl 9500322 ac 16xl 9500323 user manual patent applied for 9860310/03 please leave these instructions with the user this appliance is for use in the united kingdom (gb) and the republic of ireland (ie) only..
2 please note 1. The wonderfire airflame excel is to be used only with the type of gas for which it was supplied. Never attempt to use the appliance with other gas types. 2. Always use a fireguard complying with bs6539 or bs6778 for the protection of the young, elderly, or infirm. 3. The fire is lit...
3 ventilation requirements note: see convector instructions if being installed within a wonderfire convector box for ventilation requirements. For all airflame excel mk.3 models except af16nv / af16nvp: gb only: a permanent ventilation grille of fixed design and having a minimum free area of 100cm 2...
4 lighting the main burner once the pilot light is established the main burner can be lit by turning the control knob anticlockwise to the high position. Controlling the heat setting. In order to change from one setting to another depress the control knob slightly and turn the knob to the required p...
5 cleaning note: before attempting any of the following ensure that the fire has been allowed to cool completely. Note: some discoloration of the coals is normal. The cast parts of the fire should be carefully cleaned with a lint free damp cloth. On no account should any metal polish or similar be u...
6 placing the fuel matrix position on top of the burner as shown in figure 3. The rear face of the burner should locate into two cut-outs on the top face of the rear legs. Ensure that the matrix sits flatly on the top of the burner. Placing the dress coals these consist of: • 2 x finger coals • 4 x ...
7 placing the dress coals – continued next, take both finger coals and place one at each end of the front row of coals as shown in figure 6, again making sure that they bridge across from the front coal to the matrix. Now take six more of the random shaped coals and position as shown in figure 7. Th...
8 finally, take the three remaining square coals and position at the back of the matrix as shown in figure 9. These coals should also overlap the previous row by 5-10mm and also, even spacing is once again important. Spare parts the ceramic fuel bed items are customer replaceable. When ordering plea...
9 legal requirement every gas appliance should be installed by a competent person. If in doubt always use the services of a corgi registered installer. Please fill in the following information for your own future reference. This information should always be quoted in any correspondence with your ori...
