Woo Audio WA-5 300B User Manual - page 5
of
8
Installing Power Supply Cable
1. Locate the Power Supply Output
(left) and Power Supply Input
(right) on the rear panel. Both of
them are male sockets.
2. Align and orient
the power supply
cable, wider cut
face down, to the
male socket.
3. Insert the power
supply cable
slightly. You should
feel the connector
be inserted by 1/4
inches. Turn the
free moving ring
clockwise (about 30
degrees) until you
hear a click sound.
If you cannot turn
the ring easily,
STOP and RE-
ALIGN.
5. Check the
white marks
aligned as the
red circle
indicate.
6. Insert the other end on another
unit. NOTE: Either end of the cable
can be inserted into either unit. Plug-
in AC power cord.