Installation and operation manual for the wood stone phoenix natural gas or propane fueled stone hearth oven wood stone corporation 1801 w. Bakerview rd. Bellingham, wa 98226 - usa tel. 1-360-650-1111 fx.1-360-650-1166 info@woodstone.Net www.Woodstone-corp.Com revised october 2005 this appliance is ...
Wood stone bistro gas oven installation and operating instructions do not throw this manual away retain this manual for future reference. Additional copies of this manual and prompt responses to service/maintenance questions are available from wood stone @ 800-988-8103. Important: consult your local...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 3 phoenix installation and operation manual utility specifications ws-px-4343-rfg gas-3/4 inch gas inlet (female threaded) 80,500 btu natural gas or 68,000 btu propane electrical 120 vac, ...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 4 phoenix installation and operation manual ws-px-3030-rfg specifications utility specifications ws-px-3030-rfg gas-3/4 inch gas inlet (female threaded) 55,000 btu natural gas or 42,000 bt...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 5 phoenix installation and operation manual if this oven is not properly installed a fire may result. To reduce the risk of fire, follow these installation instructions. A major cause of o...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 6 phoenix installation and operation manual once assembled, the oven can be moved into place with a pallet jack using the lower forklift pockets. If the oven is to be installed against a w...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 7 phoenix installation and operation manual moving the oven 1. Use a forklift or other suitable lifting means to set the oven body onto blocks as shown. If the oven has the optional decora...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 8 phoenix installation and operation manual moving the oven 4. Using an appropriate hoist or lift, the oven may now be tilted (on its back) onto a pallet jack or suitable dolly. The oven c...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 9 phoenix installation and operation manual exhaust transition oven stand (6 pieces) oven body exploded parts view control module flame guard cowling mantle burner tray front panel toe kic...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 10 phoenix installation and operation manual assembly use the 3/8" x 1"carriage bolts to assemble the stand on a level surface. Be sure to use the washers provided and to tighten nuts and ...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 11 phoenix installation and operation manual 3. Using a forklift, carefully lower the body of the oven on to the stand so that the bolt holes line up. While supporting the oven with the li...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 12 phoenix installation and operation manual assembly 5. Remove the shipping panel from beneath the oven. The shipping panel is secured with 2 screws in the front, and 2 screws in the back...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 13 phoenix installation and operation manual 7. Place the exhaust transition onto the front of the oven. The lower flange should slide into the gap across the top of the oven doorway. Make...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 14 phoenix installation and operation manual 11. Install the mantle. Install the 3 threaded studs into the clips on the front of the oven. Slide 2 spacer washers over each stud.Slide the m...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 15 phoenix installation and operation manual assembly 13. Reinstall the burner guard, and optional logset if supplied. The lower tab of the guard fits into the front of the burner opening....
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 16 phoenix installation and operation manual assembly-connections 14. Once oven is in its desired location, make utility connections at the rear of the control box. Gas and electrical conn...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 17 phoenix installation and operation manual the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply system at test pressu...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 18 phoenix installation and operation manual wood stone ovens should be vented in accordance with nfpa 96 and/or all pertinent national and local codes concerning such appliances; check ve...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 19 phoenix installation and operation manual initial oven startup never operate this oven with the stainless steel night door in place!! The door is for heat retention only, and should onl...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 20 phoenix installation and operation manual general daily oven operation the oven floor temperature is displayed on the controller readout. End of the day push i/o button, all gas will go...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 21 phoenix installation and operation manual oven interior wood stone recommends the use of a brass bristled brush for sweeping aside excess food particles that will accumulate on the floo...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 22 phoenix installation and operation manual controller 1-360-650-1111 www.Woodstone-corp.Com f c o i on/off button- press to turn oven on and off temperature units- press and hold to swit...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 23 phoenix installation and operation manual troubleshooting quick troubleshooting guide problem solution controller will not turn on. 1.Incoming power to oven turned off. Check circuit br...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 24 phoenix installation and operation manual 120 v electrical diagram models produced after april, 2005..
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 25 phoenix installation and operation manual 230 v electrical diagram models produced after april, 2005..
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 26 phoenix installation and operation manual 120 vac power supply or as specified on equipment dataplate 120 v electrical diagram.
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 27 phoenix installation and operation manual interlock of oven control to an exhaust fan this connection is intended to interrupt power to the oven until the fan is turned on. S1 is a doub...
Questions? Contact your distributor, or contact wood stone at 360-650-1111 www.Woodstone-corp.Com october 2005. 28 phoenix installation and operation manual wood stone warrants its equipment to the original purchaser against defects in material or manufacture for a period of one year from the origin...