Summary of STM-7700
Page 1
Stm-7700™ user manual.
Page 2
- table of contents - copyright -------------------------------------------------------------------------------------------------------- --------------------------------------------- 4 proper handling of the device -------------------------------------------------------------------------------- ----...
Page 3
- table of contents - v. Pc connection -------------------------------------------------------------------------------------------------------------------------------- ----- 44 1. Microsoft activesync installation --------------------------------------------------------------------------------------...
Page 4
This user’s manual and related products are under the protection of the copyright law, all rights reserved. This document and any part hereof may not be copied, adopted or translated into other languages without prior written consent of woongjin system & technology co. Ltd. Copyright • use the windo...
Page 5
To insure the smooth and safe usage of this product, read carefully the instructions detailed in this manual. Proper handling of the device using accessories other than those recommended and/or included in this product can cause accidents and product failures. Woongjin system & technology co. Ltd. W...
Page 6
• avoid eye contact with the barcode scanner. It can cause eye damage. • do not remove the battery while device is on. • use only the specified battery charger. Using other chargers can cause damage to the battery and/or be a fire hazard. • do not make modifications to this product. This could cause...
Page 7
Before using the device... Ⅰ 1. Product configuration 2. Specifications (device/cradle) 3. Charging the battery 4. Replacing printer supplies – thermal paper 5. Initialization 7.
Page 8
2) additional product configuration stylus pen usb cable printer & connection wire thermal paper 1) basic product configuration stm-7700 battery & power cord main device cradle & adapter product configuration Ⅰ-1 8.
Page 9
Specifications (device) Ⅰ-2 1) mobile device description 9.
Page 10
Specifications (cradle) Ⅰ-2 2) cradle device description 10
Page 11
Charging the battery Ⅰ-3 1) charging the battery from the device open the battery cover at the back of the device and place the battery into it. Place the device on the cradle and connect the power adapter with cord to the cradle to charge the battery. 2) separately charging the battery to charge th...
Page 12
Replacing printer supplies – thermal paper Ⅰ-4 1) open the printer cover by pressing down the printer cover lever that is found at the right side of the device. 2) place the printer thermal roll paper into the printer as indicated by the picture instruction then close the printer cover. Use thermal ...
Page 13
Initialization Ⅰ-5 1) when the system does not response you may need to initialize the device by inserting the stylus into the reset hole found at the bottom of the device. 2) when initializing the device all files will be deleted/lost and all running programs will be terminated. Backup all importan...
Page 14
Getting started Ⅱ 1. Power on 2. How to use the stylus pen 3. Screen description 4. Program execution / switching 5. Using the input panel to enter characters 14.
Page 15
Power on Ⅱ-1 • insert the battery into the device, press and hold the pwr button until the device is powered on. • when the device is powered on, pressing the pwr button again turns off the device. If the device does not turn on, check the battery for proper charging. Power [pwr] button [insert the ...
Page 16
Power on Ⅱ-1 ▶ initial setup or reset the first time you power on your device or every system reset, it displays the windows mobile® screen which guides you through a series of startup procedures. 1. From the initial startup screen tap the screen using the stylus. 2. From the align screen, use your ...
Page 17
Tap the icon to select how to use the stylus pen Ⅱ-2 this section describes the basic use of the stylus pen in running or moving programs on the touch screen. Only use stylus pen that comes with this product or recommended by woongjinst. Other stylus pen can damage this product. Tap: selects an item...
Page 18: Icon
▶ status icon the task bar that you normally find at the top of the screen is similar to that of the pc windows. The icons displayed on the task bar indicates the status of the application and/or device it represents. Icon icon description battery charge level – shows your current battery charge lev...
Page 19: Icon
Icon icon description bluetooth visible – the bluetooth technology is active and the device is visible. Bluetooth connected – the bluetooth technology is active and communicating (paired) with a target bluetooth device. Wi-fi inactive – your wi-fi connection is inactive. Wi-fi active – your wi-fi co...
Page 20
▶ set the date and time setting the date and time on your device makes sure that your calendar and alarm alerts will be accurate. 1. Tap start, tap settings (you may need to scroll the page), and then tap clock & alarms (you may need to scroll the page). 2. On the time tab, select the correct time z...
Page 21
▶ set up language and regional settings regional settings specify the style in which numbers, currency, dates, and times are displayed. 1. Tap start, tap settings (you may need to scroll the page), tap system (you may need to scroll the page), and then tap regional settings (you may need to scroll t...
Page 22
▶ locking your device 1. Tap start, tap lock (left softkey). ▶ unlocking your device 1. Tap unlock (left softkey). 2. Tap unlock button. Locking and unlocking the device Ⅱ-5 22.
Page 23
▶ manage battery life no matter how big your device’s battery is, you’ll want to get the most from it. Get tips here. ▶ make the battery last longer you can do several things to make the battery in your device last longer: 1. Adjust power-management settings to decrease screen brightness and also ho...
Page 24
▶ change power-management settings you can use the power screen to check the battery's remaining power and to adjust settings that extend battery life. For example, setting brief backlight and display time outs will extend battery life. 1. Tap start > settings > power. 2. Tap the advanced tab. 3. Se...
Page 25
Use file explorer Ⅲ 1. Run and use the file explorer 25.
Page 26
▶ explore files and folders you can browse the contents of folders on your device. The highest-level folder is named my device and resembles the my computer folder on a computer. The my device folder contains the my documents, program files, temp, and windows folders, among others. 1. Tap start > fi...
Page 27
Terminal settings, how to optimize … Ⅳ 1. Background image 2. Brightness 3. Volume and sounds 4. Screen 5.Bluetooth 6. Pictures and videos 27.
Page 28
▶ select a background image for the today screen you can add a favorite picture or other image to your device and use it as a background image for your today screen display. Be aware that background pictures can make it harder to read text on the today screen. Note #1: when you use the camera to tak...
Page 29
3. In folder, select the folder that contains the picture you want to use. 4. In type, select the file type of the picture. 5. Tap the file name of the picture you want to use. 6. Tap ok. Note #2: to revert to the default background, tap start > settings > today. Under select a theme for your device...
Page 30
Adjust power-management settings to decrease screen brightness and also how long the backlight and screen displays stay on. 1. Tap start > settings > system > backlight. 2. In the battery power and external power tabs, specify how long the backlight will stay on. Also specify if pressing a button or...
Page 31
▶ set up sounds you can set up sounds on your device and associate them with events. These include incoming calls, reminders, new e-mail messages, new text messages, new voice messages, and warnings. Each event can have a distinctive sound to help you identify the event by its sound. 1. Tap start, t...
Page 32
▶ set up volume tap the speaker on icon ( ) to access the onscreen volume slider and adjust the volume level. Volume and sounds Ⅳ-3 32.
Page 33
If the screen do not respond to touches made on it or the touches are off-point, the touch screen is needed to be calibrated to set the touch points properly. 1. Tap start > settings > system > screen. 2. Set/configure the touch points in the general tab. 3. Tap on the align screen button to start c...
Page 34
▶ bluetooth connections you can connect your device to other bluetooth-enabled accessories and devices, such as headsets, gps devices, mobile phones, and computers. Bluetooth beams information, letting your device communicate with other devices. ▶ turn bluetooth on or off if the wireless carrier ena...
Page 35
2. Tap the mode tab. 3. Select or clear the turn on bluetooth check box. 4. Tap ok. Note #1: when you turn your device on, it can detect other devices that use bluetooth, but other devices will be unable to detect your device unless you have set your device to be visible to other devices. Note #2: y...
Page 36
▶ make your device visible to other devices if bluetooth is enabled on your device and you turn it on, you can detect and connect to other nearby bluetooth-enabled devices and services. On your device, you must set bluetooth to visible to enable other bluetooth devices to detect it and to establish ...
Page 37
▶ set up a bluetooth accessory you can use bluetooth-enabled accessories such as headsets, stereo headsets, car kits, and global positioning system (gps) devices with your device by creating a bluetooth partnership between your device and the bluetooth accessory. 1. Turn on your device and the acces...
Page 38
▶ set up a bluetooth partnership if the wireless carrier enables bluetooth on your device, you can establish a bluetooth partnership with other bluetooth-enabled devices. After you have created a bluetooth partnership, the two devices will automatically reconnect when in range unless you turn off bl...
Page 39
▶ accept a bluetooth partnership if the wireless carrier enables bluetooth on your device, you can establish a bluetooth partnership with other bluetooth-enabled devices. 1. Make sure both bluetooth devices are set to visible and are within range. 2. When you are prompted to accept a bluetooth partn...
Page 40
▶ rename a bluetooth partnership if you have multiple bluetooth partnerships on your device, you can give each partnership a unique name to identify it, such as my pc or bob's phone. 1. Tap start > settings > bluetooth. 2. Scroll to the device that you want to rename, tap and hold the device name un...
Page 41
▶ pictures and videos let your device capture and display those vacation photos and video. This can be accomplish by tapping on start, and then pictures & videos. ▶ easily capture, find, view, and manage pictures and videos on your device 1. Activate the camera application capture pictures and video...
Page 42
2. View a photo a. The pictures & videos folder displays thumbnails of your saved photos. B. Tap the photo you want to view. The photo will become larger to fit the screen. 3. Play a video clip a. The pictures & videos folder displays thumbnails of your saved photos and videos. B. Tap the video you ...
Page 43
4. View a slide show a. From pictures & videos folder, tap menu > play slide show. B. To end the slide show, tap the screen and then tap the close icon. 43 pictures and video Ⅳ-6.
Page 44
Pc connection v using microsoft activesync, you can synchronize the information on your personal computer with information on your stm-8800. Synchronization compares the data on your pda with your personal computer and updates both devices with the most recent information. To establish a partnership...
Page 45
Microsoft activesync installation v-1 1. Download and run the active sync installation program. Please click the [next] button if you are ready to set-up activesync. 2. You’re prompted to select the installation folder for activesync. Click the [next] button to install activesync to the default fold...
Page 46
Microsoft activesync installation v-1 3. Click on the [next] button. 4. Activesync installation is finished. Please turn on and put the stm-8800 unit on to the cradle with usb cable connected to the pc. (use usb 2.0 or higher) 46.
Page 47
Connect to a pc to install the program v-2 ▶ using activesync for program installation ▷ using the installation programs (setup.Exe or install.Exe) 1. Download the installation program to the pc or insert the installation cd in the pc ’s cd drive. 2. Connect the mobile device to the pc via activesyn...
Page 48
Appendix vi 48 1. Troubleshooting 2. Initialize to factory default 3. Terminal maintenance 4. Product specifications 5. Others 6. Notes.
Page 49: ▶ Troubleshooting
The following are the common problems encountered while using the mobile device. ▶ troubleshooting included in this chapter are solutions to the common problem listed herein. ▷ problem analysis and solution q1. The device would not turn on even when connected to external power source. First, make su...
Page 50: Desired Action.
Q3. Mobile device automatically turns off. Make sure that you never run out of power. As soon as you see the dialog box informing you that “the main battery power is very low” you must charge the battery immediately. Continued use of the mobile device even after being informed of the battery power l...
Page 51: Into The Device.
Q6. Cannot access the contents of the sd card inserted into the device. Make sure that the micro sd card is inserted properly in the slot allotted for it. Using the file explorer, see if a folder called “storage card” is present. Access the contents of the sd card from this folder. Q7. Data lost. If...
Page 52
▷ mobile device – pc connectivity and synchronization issues solution to problems when connecting the mobile device to the pc through the cradle or otherwise. For an updated information on other issues, see the pc’s activesync help or visit microsoft’s website for mobile phones (www.Microsoft.Com/wi...
Page 53
▶ initializing the mobile device back to the factory default settings (hard reset) there are many possible reasons why the mobile device has to be reinitialize back to the factory default setting, like, when the device would not respond even after performing a reset or the user forgets the password ...
Page 54
▶ information on the mobile device maintenance to be able to extend the life cycle of the mobile device, please consider the following advices: • before cleaning the touchscreen, power off the mobile device. • use small amount of glass cleaner on a soft cloth when cleaning the touchscreen. • do not ...
Page 55: Section
Product specifications vi-4 55 section specification processor samsung 800mhz os microsoft mobile 6.5 memory 512mb nand flash rom 128mb mobile ddr sdram display 240x320 3.5’ tft-lcd with touch screen, 260k color communication wlan (802.11b/g) gprs / cdma 1x bluetooth 2.0 class 2 (profile: spp) print...
Page 56
※ certification information 1. Name of device: wireless data device 2. Model:stm-7700 3. Certification information: kcc, fcc, ce, ccc certifications 4. Certified for: woongjinst co., ltd. 5. Manufacturer (country of origin): woongjinst co., ltd. (korea) instructions to users the mobile device has be...
Page 57
Fcc note this equipment has been tested and found to comply with the limits for a class b digital devi ce, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c...